Analytic pulse design for selective population transfer in many-level quantum systems: maximizing amplitude of population oscillations

State selective preparation and manipulation of discrete-level quantum systems such as atoms, molecules or quantum dots is a the ultimate tool for many diverse fields such as laser control of chemical reactions, atom optics, high-precision metrology and quantum computing. Rabi oscillations are one of the simplest, yet potentially quite useful mechanisms for achieving such manipulation. Rabi theory establishes that in the two-level systems resonant drive leads to the periodic and complete population oscillations between the two system levels. In this paper an analytic optimization algorithm for producing Rabi-like oscillations in the general discrete many-level quantum systems is presented.Comment: Published in Phys.Rev.A. This is the final published versio

Differential expression of aquaporin 3 in Triturus italicus from larval to adult epidermal conversion

By using immunohistochemical techniques applied to confocal microscopy, the presence of aquaporin 3 water channel in the epidermis of Triturus italicus (Amphibia, Urodela) has been shown. We analysed the expression of aquaporin 3 (AQP3) during the larval, pre-metamorphic and adult phases; we also showed the localization of the water-channel protein AQP3 in free-swimming conditions and during aestivation in parallel with histological analysis of the skin, focusing on the possible relationship between protein expression and terrestrial habitats. Our results indicate that aquaporin is produced as the epidermis modifies during the functional maturation phase starting at the climax. Moreover, our data suggest an increase in enzyme expression in aestivating newts emphasizing the putative functional importance of differential expression related to a distinct phase of the biological cycle

Running in standard versus minimalist shoes

The purpose of this study was to determine if running in a minimalist shoe results in a reduction in ground reaction forces and alters kinematics over standard shoe running. The secondary purpose of this study was to determine if within–session accommodation to a novel minimalist shoe occurs. Running in a minimalist shoe appears to, at least in the short–term, increase loading of the lower extremity over standard shoe running. The accommodation period resulted in less favorable landing mechanics in both shoes. These findings bring into question whether minimal shoes will provide enough feedback to induce an alteration that is similar to barefoot running

EXPLORING THE POTENTIAL EFFECTS OF STRENGTH TRAINING ON RUNNING ECONOMY: A SIMULATION STUDY

Strength training can improve running economy (RE) and performance in distance runners. This study investigated the effect of potential adaptations stemming from strength training on RE using simulation. Muscle-tendon unit (MTU) properties (muscle strength and mass, pennation angle, tendon stiffness, fibre composition) of muscle groups were altered within muscle-driven simulations of running at 4.5 and 6.5 m·s-1. Outputs from the muscle-driven simulations were input to an energetics model to determine whole-body metabolic power. Alterations to MTU properties resulted in variable changes (range = 1.4% decrement – 8.9% improvement in RE) to whole-body metabolic power and RE. The findings highlight potential targets for strength training programs aiming to improve RE in distance runners

Effect of bio-engineering on size, shape, composition and rigidity of bacterial microcompartments

Bacterial microcompartments (BMCs) are proteinaceous organelles that are found in a broad range of bacteria and are composed of an outer shell that encases an enzyme cargo representing a specific metabolic process. The outer shell is made from a number of different proteins that form hexameric and pentameric tiles, which interact to allow the formation of a polyhedral edifice. We have previously shown that the Citrobacter freundii BMC associated with 1,2-propanediol utilization can be transferred into Escherichia coli to generate a recombinant BMC and that empty BMCs can be formed from just the shell proteins alone. Herein, a detailed structural and proteomic characterization of the wild type BMC is compared to the recombinant BMC and a number of empty BMC variants by 2D-gel electrophoresis, mass spectrometry, transmission electron microscopy (TEM) and atomic force microscopy (AFM). Specifically, it is shown that the wild type BMC and the recombinant BMC are similar in terms of composition, size, shape and mechanical properties, whereas the empty BMC variants are shown to be smaller, hollow and less malleable

One hundred and eighty years of Saga pedo (Pallas, 1771) (Orthoptera, Tettigoniidae) findings in Italy diachronically revisited

According to the most recent updates on the occurrence of Saga pedo in Italy, including observations from San Marino, 92 findingshave been reported. Of these, 12 were recorded between 2000 and 2020, 26 between 1971 and 1999, and 44 were before 1970(1855–1969). The observations of this Saginae, listed in the annexes of the Habitat Directive, referred to 18 regions (excludingEmilia Romagna and Marche) and 42 provinces. Through this work, utilizing web searches and recently published or unpublisheddata, we have collected information on the species’ occurrence across all Italian regions, adding 11 more provinces and 81 newfindings. We put together 174 occurrence records of this insect in Italy between 1855 and 2023, dividing them into three periods:(1) before 1970; (2) 1971–1999; and (3) 2000–2023. Here, we present its diachronic distribution. Moreover, we identified aninteresting relationship between limestone or dolomite bedrocks and the distribution of Saga across Italian territory, suggestinga strong calciphily in this orthopteran. Over the past 180 years, the elevation of sampling sites has also increased. The mean altitudeof Saga records rose from less than 400 m to about 540 a.s.l. with its maximum known altitude in Italy increasing from 950 to over1,200 m a.s.l. This research provides additional insights into the importance of Citizen Science in collecting ecological data,particularly for threatened species and those listed under the Habitat Directive

Distribution of persistent organic pollutants (POPS) IN wild Bluefin tuna (Thunnus thynnus) from different FAO capture zones

Residues of environmental contaminants in food represent a concern in food safety programs. In this study, the distribution of persistent organic pollutants (POPs) were evaluated in 79 tuna samples from FAO areas 51 (Indian Ocean), 71 (Pacific Ocean), 34 (Atlantic Ocean), and 37 (Mediterranean Sea). 6 polychlorinated biphenyls (PCBs), 16 organochlorines (OCs) and 7 polybrominated biphenyl ethers (PBDEs) were selected as representative compounds according to EFSA POPs monitoring guidelines. An analytical method, based on Accelerated Solvent Extraction (ASE), with an "in-line" clean-up step and GC-MS/MS detection, was developed, validated and applied. PCBs were detected in all FAO areas, with a prevalence of 100% for most of them. In the FAO area 37, only, all PBDEs were detected. Only 5 OCs were detected. The results showed that POPs contamination of tuna reflects FAO area contamination; in particular FAO area 37 was the most polluted. Moreover, tuna muscle was an appropriate matrix for monitoring contamination and for obtaining information about food safety

Hemp Flour Particle Size Affects the Quality and Nutritional Profile of the Enriched Functional Pasta

The rheological and chemical quality of pasta samples, which were obtained using the durum wheat semolina fortified with the hemp seed solid residue, after oil extraction, sieved at 530 mu m (Hemp 1) or 236 mu m (Hemp 2) at different percentages of substitution (5%, 7.5%, and 10%, were evaluated. The total polyphenolic content in hemp flour was quantified in the range of 6.38-6.35 mg GAE/g, and free radical scavenging was included in the range from 3.94-3.75 mmol TEAC/100 g in Hemp 1 and Hemp 2, respectively. The phenolic profiles determined by UHPLC-ESI/QTOF-MS showed that cannabisin C, hydroxycinnamic and protocatechuic acids were the most abundant phenolic compounds in both hemp flours. Among the amino acids, isoleucine, glutamine, tyrosine, proline, and lysine were the most abundant in raw materials and pasta samples. Although the hemp seeds were previously subjected to oil extraction, hemp flours retain about 8% of oil, and the fatty acids present in the largest amount were linoleic acid and alpha-linolenic acid. Characterization of the minerals showed that the concentration of macro and trace elements increased according to fortification percentage. Sensory evaluation and cooking quality indicated that the best performance in terms of process production and consumer acceptance was obtained using Hemp 2 at 7.5%. Hemp supplementation could be a potential option for producing high-quality, nutritionally rich, low-cost pasta with good color and functionality

Health-related quality of life in patients with primary open-angle glaucoma. An italian multicentre observational study

PurposeAs a progressive condition, glaucoma may impair health-related quality of life (HRQoL), due to vision loss and other factors. This study evaluated HRQoL in a cohort of patients treated for primary open-angle glaucoma (POAG) and assessed its association with clinical features. MethodsThis was an Italian, multicentre, cross-sectional, observational study with the subgroup of newly diagnosed patients with POAG prospectively followed up for one year. Patients with previous or new diagnosis (or strong clinical suspicion) of POAG aged >18years were considered eligible. Information was collected on demographic characteristics, medical history, clinical presentation and POAG treatments. HRQoL was measured using the 25-item National Eye Institute Visual Function Questionnaire (NEI-VFQ-25) and Glaucoma Symptom Scale (GSS). Subscale and total scores were obtained and a Pearson correlation coefficient between instruments' scores calculated. ResultsA total of 3227 patients were enrolled from 2012 to 2013 and 3169 were analysed. Mean age was 66.9years. A total of 93.8% had a previous diagnosis (median duration: 8.0years). Median values for mean deviation and pattern standard deviation were 3.9 and 3.6 dB, respectively. Mean scores on most subscales of the NEI-VFQ-25 exceeded 75.0 and mean GSS subscale scores ranged between 70.8 and 79.7 (with a total mean score of 74.8). HRQoL scores on both scales were significantly inversely associated with POAG severity. ConclusionIn this large sample of Italians treated for POAG, disease severity was limited and HRQoL scores were high. QoL decreased with advancing disease severity. These findings confirm the role of vision loss in impairing QoL in POAG, underlying the importance of timely detection and appropriate treatment

Self-oligomerization regulates stability of survival motor neuron protein isoforms by sequestering an SCF^Slmb degron

Spinal muscular atrophy (SMA) is caused by homozygous mutations in human SMN1. Expression of a duplicate gene (SMN2) primarily results in skipping of exon 7 and production of an unstable protein isoform, SMNΔ7. Although SMN2 exon skipping is the principal contributor to SMA severity, mechanisms governing stability of survival motor neuron (SMN) isoforms are poorly understood. We used a Drosophila model system and label-free proteomics to identify the SCFSlmb ubiquitin E3 ligase complex as a novel SMN binding partner. SCFSlmb interacts with a phosphor degron embedded within the human and fruitfly SMN YG-box oligomerization domains. Substitution of a conserved serine (S270A) interferes with SCFSlmb binding and stabilizes SMNΔ7. SMA-causing missense mutations that block multimerization of full-length SMN are also stabilized in the degron mutant background. Overexpression of SMNΔ7S270A, but not wild-type (WT) SMNΔ7, provides a protective effect in SMA model mice and human motor neuron cell culture systems. Our findings support a model wherein the degron is exposed when SMN is monomeric and sequestered when SMN forms higher-order multimers