Stress intensity factors for surface cracks in round bar under single and combined loadings

This paper numerically discusses stress in-tensity factor (SIF) calculations for surface cracks in round bars subjected to single and combined loadings. Different crack aspect ratios, a/b, ranging from 0.0 to 1.2 and the relative crack depth, a/D, in the range of 0.1 to 0.6 are considered. Since the torsion loading is non-symmetrical, the whole finite element model has been constructed, and the loadings have been remotely applied to the model. The equivalent SIF, F∗EQ is then used to combine the individual SIF from the bending or tension with torsion loadings. Then, it is compared with the combined SIF, F∗FE obtained numerically using the finite element analysis under similar loadings. It is found that the equivalent SIF method successfully predicts the combined SIF, F∗EQ for Mode I when compared with F∗FE . However, some discrepancies between the results, determined from the two different approaches, occur when FIII is involved. Meanwhile, it is also noted that the F∗FE is higher than the F∗EQ due to the difference in crack face interactions and de-formations

Indoor air concentration from selective laser sintering 3d printer using Virgin Polyamide Nylon (PA12) Powder: a pilot study

Environmental emissions from additive manufacturing (AM) have attracted much attention recently. The capability in fabricating complex part make AM famous in developing prototype and product in various industries, especially in aerospace, medical, automotive, and manufacturing industries. However, the study on emission and exposure mainly focusses on the desktop type such as fused deposition modelling. This study investigates the emission and indoor concentration from powder bed fusion of selective laser sintering (SLS) technologies. Prior to the investigation, virgin PA12 has undergone characterization in terms of morphology, size and thermal analysis. Calibration block using virgin polyamide nylon (PA12) is selected to be printed in this study. Parameters such particulate matter size 2.5 μm (PM 2.5), total volatile organic compound (TVOC), carbon dioxide (CO2), formaldehyde, temperature and relative humidity (RH) are set to be monitored through real-time sampling of 8 hours based on Industry Code of Practice on Indoor Air Quality 2010 by Department Occupational Safety and Health (DOSH) Malaysia. Four phases of the printing process involve are background data, preprinting, during printing and post-printing. Based on the study it was found that PM 2.5 and CO2 exceed the acceptable limit recommended by DOSH Malaysia during the preparation of powder (preprinting) at 1218 ppm and 1070 μg/m3 respectively. Meanwhile TVOC concentration was influenced by the sintered powder temperature and recorded at 0.5 ppm. Temperature, relative humidity and formaldehyde were maintained throughout the SLS process. Mitigation strategies using mechanical ventilation and personal protective equipment (PPE) are recommended to be used to reduce the potential of occupational hazard to the operators

Development of Metal Matrix Composites and Related Forming Techniques by Direct Recycling of Light Metals: A Review

In this contribution, researchers have provided a summary of the agricultural and industrial waste recoveries to be deployed as the composite reinforced materials. It covers the work of previous researchers related to this area and addressed the key challenge to overcome for further development and advancement. The major contributions of this work were a comprehensive review on a wide variety of Sever Plastic Deformation (SPD) techniques implementation in development of the waste materials based reinforced metal matrix composite. The waste materials can be derived from either industrial or natural sources. Also, it discusses the range of Metal Matrix Composites (MMCs) applications in engineering and related manufacturing techniques with further emphasized on the process parameters which directly determine the material properties. Some useful suggestions were proposed to the industrialists, academicians and scientists to further improve the performance aspect of Metal Matrix Composites (MMCs) for commercialization reason. Furthermore, industrial and natural waste enhancement materials have been strongly proposed because of their higher reinforced content particulates such as alumina (Al2O3) and silica (SiO2). Also, the mechanical and physical properties are directly influenced by the size, shape and weight-volume friction of the composites as same as the potential reactions between matrixes/reinforced materials interfac

Finite element analysis of j-integral for surface cracks in round bars under combined mode i loading

This paper numerically discusses the role of J-integral along the surface crack front in cylindrical bar under combined mode I loading. It is also verified the analytical model derived from the first part of this paper by comparing the results obtained numerically using ANSYS finite element program. It is found that the proposed model capable to predict the J-integral successfully along the crack front but not for the area away from the deepest crack depth. This is probably due to the fact that the problem of singularity

Classification of damage severity in natural fibre composites using principal component analysis

The present paper deals with an approach in predicting the classification of damage in natural fibre reinforced composites (NFC) panel using signal processing procedure as indicative parameters and principle component analysis as a learning tool. An impact event produced strain data and the response signal was investigated. An effective impact damage classification procedure is established using a principal component analysis approach. The system was trained to classify the damage class based on the input from the signal features. It has been observed that, the network can learn and classify effectively the damage size in the panel which is the combination features retained at about 84.5% of the varianc

Malocclusion, psycho-social impacts and treatment need: A cross-sectional study of Tanzanian primary school-children

<p>Abstract</p> <p>Background</p> <p>studies on the relationship between children's malocclusion and its psycho-social impacts are so far largely unexplored in low-income countries. This study aimed to assess the prevalence of malocclusion, reported dental problems and dissatisfaction with dental appearance among primary school children in Tanzania. The relationship of dissatisfaction with socio-demographic characteristics, clinically defined malocclusion and psychosocial impacts of dental anomalies was investigated. Orthodontic treatment need was estimated using an integrated socio-dental approach.</p> <p>Method</p> <p>One thousand six hundred and one children (mean age 13 yr) attending primary schools in the districts of Kinondoni and Temeke completed face to face interviews and a full mouth clinical examination. The survey instrument was designed to measure a Kiswahili translated and culturally adapted Child Oral Impact on Daily Performance (Child-OIDP) frequency score, reported dental problems, dissatisfaction with dental appearance/function and socio-demographic characteristics.</p> <p>Results</p> <p>The prevalence of malocclusion varied from 0.9% (deep bite) to 22.5% (midline shift) with a total of 63.8% having at least one type of anomaly. Moderate proportions of children admitted dental problems; ranging from 7% (space position) to 20% (pain). The odds ratio of having problems with teeth position, spaces, pain and swallowing if having any malocclusion were, respectively 6.7, 3.9, 1.4 and 6.8. A total of 23.3% children were dissatisfied with dental appearance/function. Children dissatisfied with their dental appearance were less likely to be Temeke residents (OR = 0.5) and having parents of higher education (OR = 0.6) and more likely to reporting problem with teeth position (OR = 4.3) and having oral impacts (OR = 2.7). The socio-dental treatment need of 12% was five times lower than the normative need assessment of 63.8%.</p> <p>Conclusion</p> <p>Compared to the high prevalence of malocclusion, psycho social impacts and dissatisfaction with appearance/function was not frequent among Tanzanian schoolchildren. Subjects with malocclusion reported problems most frequently and malocclusion together with other psycho-social impact scores determined children's satisfaction with teeth appearance- and function.</p

Identification of Serotype in Culture Negative Pneumococcal Meningitis Using Sequential Multiplex PCR: Implication for Surveillance and Vaccine Design

BACKGROUND: PCR-based serotyping of Streptococcus pneumoniae has been proposed as a simpler approach than conventional methods, but has not been applied to strains in Asia where serotypes are diverse and different from other part of the world. Furthermore, PCR has not been used to determine serotype distribution in culture-negative meningitis cases. METHODOLOGY: Thirty six serotype-specific primers, 7 newly designed and 29 previously published, were arranged in 7 multiplex PCR sets, each in new hierarchies designed for overall serotype distribution in Bangladesh, and specifically for meningitis and non-meningitis isolates. Culture-negative CSF specimens were then tested directly for serotype-specific sequences using the meningitis-specific set of primers. PCR-based serotyping of 367 strains of 56 known serotypes showed 100% concordance with quellung reaction test. The first 7 multiplex reactions revealed the serotype of 40% of all, and 31% and 48% non-meningitis and meningitis isolates, respectively. By redesigning the multiplex scheme specifically for non-meningitis or meningitis, the quellung reaction of 43% and 48% of respective isolates could be identified. Direct examination of 127 culture-negative CSF specimens, using the meningitis-specific set of primers, yielded serotype for 51 additional cases. CONCLUSIONS: This PCR approach, could improve ascertainment of pneumococcal serotype distributions, especially for meningitis in settings with high prior use of antibiotics

Dental Occlusion in a Split Amazon Indigenous Population: Genetics Prevails over Environment

Background: Studies examining human and nonhuman primates have supported the hypothesis that the recent increase in the occurrence of misalignment of teeth and/or incorrect relation of dental arches, named dental malocclusion, is mainly attributed to the availability of a more processed diet and the reduced need for powerful masticatory action. For the first time on live human populations, genetic and tooth wear influences on occlusal variation were examined in a split indigenous population. The Arara-Iriri people are descendants of a single couple expelled from a larger village. In the resultant village, expansion occurred through the mating of close relatives, resulting in marked genetic cohesion with substantial genetic differences. Methodology/Principal Findings: Dental malocclusion, tooth wear and inbreeding coefficient were evaluated. The sample examined was composed of 176 individuals from both villages. Prevalence Ratio and descriptive differences in the outcomes frequency for each developmental stage of the dentition were considered. Statistical differences between the villages were examined using the chi-square test or Fisher’s exact statistic. Tooth wear and the inbreeding coefficient (F) between the villages was tested with Mann-Whitney statistics. All the statistics were performed using two-tailed distribution at p#0.05. The coefficient inbreeding (F) confirmed the frequent incestuous unions among the Arara-Iriri indigenous group. Despite the tooth wear similarities, we found a striking difference in occlusal patterns between the two Arara villages. In the original village, dental malocclusion was present in about one third of the population; whilst in the resultant village, the occurrence was almost doubled. Furthermore, the morphological characteristics of malocclusion were strongly different between the groups. Conclusions/Significance: Our findings downplay the widespread influence of tooth wear, a direct evidence of what an individual ate in the past, on occlusal variation of living human populations. They also suggest that genetics plays the most important role on dental malocclusion etiology