Porous Poly(3,4-ethylenedioxythiophene)-Based Electrodesfor Detecting Stress Biomarkers in Artificial Urine and Sweat

When danger is perceived, the human body responds to overcome obstacles and survive a stressful situation; however, sustained levels of stress are associated with health disorders and diminished life quality. Hence, stress biomarkers are monitored to control stress quantitatively. Herein, a porous sensor (4l-COP/p) composed of poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-ethylenedioxythiophene-co-N-methylpyrrole) (COP), which is prepared in a four-layered fashion to detect dopamine (DA) and serotonin (5-HT), is presented. Specifically, the detection is conducted in phosphate-buffered saline (PBS), as well as artificial urine and sweat, by applying cyclic voltammetry. The limit of detection values obtained are as low as 5.7 × 10−6 and 1.4 × 10−6 m for DA and 5-HT, respectively, when assessed individually in artificial urine. When mixed in PBS, 4l-COP/p detects both biomarkers with a resolution of 0.18 V and a sensitivity of 40 and 30 μA mm−1 for DA and 5-HT, respectively. Additionally, by theoretical calculations, the interaction pattern that each stress biomarker establishes with the PEDOT outer layer is elucidated. Whereas DA interacts with the ������-system of PEDOT, 5-HT forms specific hydrogen bonds with the conducting polymer chains. The resolution value obtained depends upon such interactions. Overall, 4l-COP/p electrodes display potential as stress sensing devices for healthcare technologies.Authors acknowledge MINECO/FEDER (RTI2018-098951-B-I00), the Agència de Gestió d'Ajuts Universitaris i de Recerca (2017SGR359). M.M.P.-M. thanks the Spanish Ministry of Educación y Formación Profesional for the Junior Beatriz Galindo Award (BG20/00216)

Properties of composite laminates based on basalt fibers with epoxidized vegetable oils

This paper deals with the development of polymeric materials derived from epoxidized vegetable oils which have been used in the manufacture of laminated composite materials with basalt fabrics. Epoxidized linseed oil (ELO) and epoxidized soybean oil (ESBO) were used as biobased matrices. The basalt fabrics were modified with amino-silane and glycidyl-silane to increase fiber-matrix interactions. The curing behaviour of both resins was evaluated by differential scanning calorimetry (DSC) and oscillatory rheometry (OR). The evaluation of mechanical properties was made by tensile, flexural and Charpy tests. The extent of the fiber-matrix interactions among interface was evaluated by scanning electron microscopy (SEM). The obtained results revealed that surface modification of basalt fibers with glycidyl-silane clearly improves the mechanical properties of the composites. The use of the ELO resin as matrix for composite laminates improved substantially the mechanical performance compared to composites made with ESBO. (C) 2015 Elsevier Ltd. All rights reserved.This study was funded by the "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana (reference number: GV/2014/008).Samper Madrigal, MD.; Petrucci, R.; Sánchez Nacher, L.; Balart Gimeno, RA.; Kenny, JM. (2015). Properties of composite laminates based on basalt fibers with epoxidized vegetable oils. Materials and Design. 72:9-15. doi:10.1016/j.matdes.2015.02.002S9157

New environmentally friendly composite laminates with epoxidized linseed oil (ELO) and slate fiber fabrics

This work focuses on the development of new composite laminates based on the use of epoxidized linseed oil (ELO) as matrix and reinforcement fabrics from slate fibers with different silane treatments. The curing behavior of the ELO resin is followed by differential scanning calorimetry (DSC) and the gelation is studied by oscillatory rheometry and gel-time. Composite laminates of ELO matrix and slate fabrics are manufactured by Rein Transfer Molding (RTM) and the mechanical properties of the composite laminates are tested in tensile, flexural and impact conditions. The effects of different silane coupling agents on fiber-matrix interface phenomena are studied by scanning electron microscopy (SEM). As in other siliceous fibers, silane treatment leads to improved mechanical performance but glycidyl silane treatment produces the optimum results as the interactions between silanized slate fiber and epoxidized linseed oil are remarkably improved as observed by scanning electron microscopy (SEM). (C) 2014 Elsevier Ltd. All rights reserved.This study has been funded by the "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana (reference number: GV/2014/008). Authors thank Microscopy Services at UPV for helping in using SEM technique.Samper Madrigal, MD.; Petrucci, R.; Sánchez Nacher, L.; Balart Gimeno, RA.; Kenny, JM. (2015). New environmentally friendly composite laminates with epoxidized linseed oil (ELO) and slate fiber fabrics. Composites Part B: Engineering. 71:203-209. https://doi.org/10.1016/j.compositesb.2014.11.0342032097

Espermioestasis y adenomiosis en epididimo de macho cabrío: informe de un caso

Las alteraciones del testículo de los pequeños rumiantes tienen gran Importancia porque repercuten en la reproducción de estas especies

What drives growth of Scots pine in continental Mediterranean climates: drought, low temperatures or both?

Scots pine forests subjected to continental Mediterranean climates undergo cold winter temperatures and drought stress. Recent climatic trends towards warmer and drier conditions across the Mediterranean Basin might render some of these pine populations more vulnerable to drought-induced growth decline at the Southernmost limit of the species distribution. We investigated how cold winters and dry growing seasons drive the radial growth of Scots pine subject to continental Mediterranean climates by relating growth to climate variables at local (elevational gradient) and regional (latitudinal gradient) scales. Local climate-growth relationships were quantified on different time scales (5-, 10- and 15-days) to evaluate the relative role of elevation and specific site characteristics. A negative water balance driven by high maximum temperatures in June (low-elevation sites) and July (high-elevation sites) was the major constraint on growth, particularly on a 5- to 10-day time scale. Warm nocturnal conditions in January were associated with wider rings at the high-elevation sites. At the regional scale, Scots pine growth mainly responded positively to July precipitation, with a stronger association at lower elevations and higher latitudes. January minimum temperatures showed similar patterns but played a secondary role as a driver of tree growth. The balance between positive and negative effects of summer precipitation and winter temperature on radial growth depends on elevation and latitude, with low-elevation populations being more prone to suffer drought and heat stress; whereas, high-elevation populations may be favoured by warmer winter conditions. This negative impact of summer heat and drought has increased during the past decades. This interaction between climate and site conditions and local adaptations is therefore decisive for the future performance and persistence of Scots pine populations in continental Mediterranean climates. Forecasting changes in the Scots pine range due to climate change should include this site-related information to obtain more realistic predictions, particularly in Mediterranean rear-edge areas

X-chromosome tiling path array detection of copy number variants in patients with chromosome X-linked mental retardation

Contiene 3 ficheros adicionales con información suplementaria.-- et al.[Background] Aproximately 5–10% of cases of mental retardation in males are due to copy number variations (CNV) on the X chromosome. Novel technologies, such as array comparative genomic hybridization (aCGH), may help to uncover cryptic rearrangements in X-linked mental retardation (XLMR) patients. We have constructed an X-chromosome tiling path array using bacterial artificial chromosomes (BACs) and validated it using samples with cytogenetically defined copy number changes. We have studied 54 patients with idiopathic mental retardation and 20 controls subjects.[Results] Known genomic aberrations were reliably detected on the array and eight novel submicroscopic imbalances, likely causative for the mental retardation (MR) phenotype, were detected. Putatively pathogenic rearrangements included three deletions and five duplications (ranging between 82 kb to one Mb), all but two affecting genes previously known to be responsible for XLMR. Additionally, we describe different CNV regions with significant different frequencies in XLMR and control subjects (44% vs. 20%).[Conclusion] This tiling path array of the human X chromosome has proven successful for the detection and characterization of known rearrangements and novel CNVs in XLMR patients.The authors thank the "Genoma España" and Genome Canada joint R+D+I projects in human health, plants and aquiculture; the former "Departament d'Universitats i Societat de la Informació" (DURSI) and the "Departament de Salut", from the Catalan Autonomous Government (2005SGR00008 - Generalitat de Catalunya); the Instituto de Salud Carlos III (PI041126, CIBER-ESP), the EU's Sixth Framework Programme [FP6-2005-LIFESCIHEALTH-7; ANEUPLOIDY No. 037627] and Fundación Areces (U-2006-FARECES-O).Peer reviewe

P-P Total Cross Sections at VHE from Accelerator Data

Comparison of P-P total cross-sections estimations at very high energies - from accelerators and cosmic rays - shows a disagreement amounting to more than 10 %, a discrepancy which is beyond statistical errors. Here we use a phenomenological model based on the Multiple-Diffraction approach to successfully describe data at accelerator energies. The predictions of the model are compared with data On the basis of regression analysis we determine confident error bands, analyzing the sensitivity of our predictions to the employed data for extrapolation. : using data at 546 and 1.8 TeV, our extrapolations for p-p total cross-sections are only compatible with the Akeno cosmic ray data, predicting a slower rise with energy than other cosmic ray results and other extrapolation methods. We discuss our results within the context of constraints in the light of future accelerator and cosmic ray experimental results.Comment: 26 pages aqnd 11 figure

Influence of age on the occurrence of adverse events in rheumatic patients at the onset of biological treatment : Data from the BIOBADASER III register

To assess whether age, at the beginning of biologic treatment, is associated with the time a first adverse event (AE) appears in patients with rheumatoid arthritis (RA), ankylosing spondylitis (AS), or psoriatic arthritis (PsA). All patients in the BIOBADASER registry diagnosed with RA, AS, and PsA, and classified as young ( 75 years old) at start of biological treatment were included. Factors associated with the appearance of a first AE using adjusted incidence rate ratios (IRR) (Poisson regression) were analyzed. Survival to first AE was studied by Kaplan-Meier analysis and hazard ratios (HR) by Cox regression. 2483 patients were included: 1126 RA, 680 PsA, and 677 AS. Age group stratification was as follows: 63 young, 2127 adults, 237 elderly, and 56 very elderly. Regression model revealed an increased probability of suffering a first AE at age 65 years or older [IRR elderly: 1.42 (CI95% 1.13-1.77)]. Other characteristics associated with AE were female gender, the use of DMARDs, including methotrexate, the presence of comorbidities, and the time of disease duration. Factors that had the greatest impact on survival over a first AE were age > 75 years [HR 1.50 (1.01-2.24)] and female gender [HR 1.42 (1.22-1.64)]. Age at the start of treatment and female gender are key factors associated with the appearance of a first AE with biologics. Other factors related to patient status and treatment were also associated with a first AE in rheumatic patients treated with biologics