309 research outputs found
Enantioselective N-heterocyclic carbene catalyzed formal [3+2] cycloaddition using α-aroyloxyaldehydes and oxaziridines
We thank the EPSRC Centre for Doctoral Training in Critical Resource Catalysis (CRITICAT, grant code EP/L016419/1) (R.W.F.K.) for funding. The European Research Council under the European Union’s Seventh Framework Programme (FP7/2007–2013) ERC Grant Agreement No. 279850 is also acknowledged. A.D.S. thanks the Royal Society for a Wolfson Research Merit Award.An enantioselective N-heterocyclic carbene catalysed formal [3+2] cycloaddition has been developed for the synthesis of oxazolindin-4-one products. The reaction of oxaziridines and α-aroyloxyaldehydes under N-heterocyclic carbene catalysis provides the formal cycloaddition products with excellent control of the diastereo- and enantioselectivity (12 examples, up to >95:5 dr, >99:1 er). A matched-mismatched effect between the enantiomer of the catalyst and oxaziridine was identified, and preliminary mechanistic studies have allowed the proposal of a model to explain these observations.Publisher PDFPeer reviewe
FeII4L4 Tetrahedron Binds to Nonpaired DNA Bases.
A water-soluble self-assembled supramolecular FeII4L4 tetrahedron binds to single stranded DNA, mismatched DNA base pairs, and three-way DNA junctions. Binding of the coordination cage quenches fluorescent labels on the DNA strand, which provides an optical means to detect the interaction and allows the position of the binding site to be gauged with respect to the fluorescent label. Utilizing the quenching and binding properties of the coordination cage, we developed a simple and rapid detection method based on fluorescence quenching to detect unpaired bases in double-stranded DNA.The authors acknowledge support from the UK Engineering and Physical Sciences Research Council (EPSRC EP/M008258/1, EPSRC EP/P027067/1, and EPSRC EP/L015978/1). This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 64219
Exploring the feasibility of Conjoint Analysis as a tool for prioritizing innovations for implementation
Background: In an era of scarce and competing priorities for implementation, choosing what to implement is a key decision point for many behavioural change projects. The values and attitudes of the professionals and managers involved inevitably impact the priority attached to decision options. Reliably capturing such values is challenging. Methods: This paper presents an approach for capturing and incorporating professional values into the prioritization of healthcare innovations being considered for adoption. Conjoint Analysis (CA) was used in a single UK Primary Care Trust to measure the priorities of healthcare professionals working with women with postnatal depression. Rating-based CA data was gathered using a questionnaire and then mapped onto 12 interventions being considered as a means of improving the management of postnatal depression. Results: The ‘impact on patient care’ and the ‘quality of supporting evidence’ associated with the potential innovations were the most influential in shaping priorities. Professionals were least influenced by whether an innovation was an existing national or local priority, or whether current practice in the Trust was meeting minimum standards. Ranking the 12 innovations by the preferences of potential adopters revealed ‘guided self help’ was the top priority for implementation and ‘screening questions for post natal depression’ the least. When other factors were considered (such as the presence of routine data or planned implementation activity elsewhere in the Trust), the project team chose to combine the eight related treatments and implement these as a single innovation referred to as ‘psychological therapies’. Conclusions: Using Conjoint Analysis to prioritise potential innovation implementation options is a feasible means of capturing the utility of stakeholders and thus increasing the chances of an innovation being adopted. There are some practical barriers to overcome such as increasing response rates to conjoint surveys before routine and unevaluated use of this technique should be considered
All-sky search for periodic gravitational waves in LIGO S4 data
We report on an all-sky search with the LIGO detectors for periodic
gravitational waves in the frequency range 50-1000 Hz and with the frequency's
time derivative in the range -1.0E-8 Hz/s to zero. Data from the fourth LIGO
science run (S4) have been used in this search. Three different semi-coherent
methods of transforming and summing strain power from Short Fourier Transforms
(SFTs) of the calibrated data have been used. The first, known as "StackSlide",
averages normalized power from each SFT. A "weighted Hough" scheme is also
developed and used, and which also allows for a multi-interferometer search.
The third method, known as "PowerFlux", is a variant of the StackSlide method
in which the power is weighted before summing. In both the weighted Hough and
PowerFlux methods, the weights are chosen according to the noise and detector
antenna-pattern to maximize the signal-to-noise ratio. The respective
advantages and disadvantages of these methods are discussed. Observing no
evidence of periodic gravitational radiation, we report upper limits; we
interpret these as limits on this radiation from isolated rotating neutron
stars. The best population-based upper limit with 95% confidence on the
gravitational-wave strain amplitude, found for simulated sources distributed
isotropically across the sky and with isotropically distributed spin-axes, is
4.28E-24 (near 140 Hz). Strict upper limits are also obtained for small patches
on the sky for best-case and worst-case inclinations of the spin axes.Comment: 39 pages, 41 figures An error was found in the computation of the C
parameter defined in equation 44 which led to its overestimate by 2^(1/4).
The correct values for the multi-interferometer, H1 and L1 analyses are 9.2,
9.7, and 9.3, respectively. Figure 32 has been updated accordingly. None of
the upper limits presented in the paper were affecte
Search for gravitational waves from binary inspirals in S3 and S4 LIGO data
We report on a search for gravitational waves from the coalescence of compact
binaries during the third and fourth LIGO science runs. The search focused on
gravitational waves generated during the inspiral phase of the binary
evolution. In our analysis, we considered three categories of compact binary
systems, ordered by mass: (i) primordial black hole binaries with masses in the
range 0.35 M(sun) < m1, m2 < 1.0 M(sun), (ii) binary neutron stars with masses
in the range 1.0 M(sun) < m1, m2 < 3.0 M(sun), and (iii) binary black holes
with masses in the range 3.0 M(sun)< m1, m2 < m_(max) with the additional
constraint m1+ m2 < m_(max), where m_(max) was set to 40.0 M(sun) and 80.0
M(sun) in the third and fourth science runs, respectively. Although the
detectors could probe to distances as far as tens of Mpc, no gravitational-wave
signals were identified in the 1364 hours of data we analyzed. Assuming a
binary population with a Gaussian distribution around 0.75-0.75 M(sun), 1.4-1.4
M(sun), and 5.0-5.0 M(sun), we derived 90%-confidence upper limit rates of 4.9
yr^(-1) L10^(-1) for primordial black hole binaries, 1.2 yr^(-1) L10^(-1) for
binary neutron stars, and 0.5 yr^(-1) L10^(-1) for stellar mass binary black
holes, where L10 is 10^(10) times the blue light luminosity of the Sun.Comment: 12 pages, 11 figure
Search for gravitational-wave bursts in LIGO data from the fourth science run
The fourth science run of the LIGO and GEO 600 gravitational-wave detectors,
carried out in early 2005, collected data with significantly lower noise than
previous science runs. We report on a search for short-duration
gravitational-wave bursts with arbitrary waveform in the 64-1600 Hz frequency
range appearing in all three LIGO interferometers. Signal consistency tests,
data quality cuts, and auxiliary-channel vetoes are applied to reduce the rate
of spurious triggers. No gravitational-wave signals are detected in 15.5 days
of live observation time; we set a frequentist upper limit of 0.15 per day (at
90% confidence level) on the rate of bursts with large enough amplitudes to be
detected reliably. The amplitude sensitivity of the search, characterized using
Monte Carlo simulations, is several times better than that of previous
searches. We also provide rough estimates of the distances at which
representative supernova and binary black hole merger signals could be detected
with 50% efficiency by this analysis.Comment: Corrected amplitude sensitivities (7% change on average); 30 pages,
submitted to Classical and Quantum Gravit
Search for Gravitational Waves Associated with 39 Gamma-Ray Bursts Using Data from the Second, Third, and Fourth LIGO Runs
We present the results of a search for short-duration gravitational-wave
bursts associated with 39 gamma-ray bursts (GRBs) detected by gamma-ray
satellite experiments during LIGO's S2, S3, and S4 science runs. The search
involves calculating the crosscorrelation between two interferometer data
streams surrounding the GRB trigger time. We search for associated
gravitational radiation from single GRBs, and also apply statistical tests to
search for a gravitational-wave signature associated with the whole sample. For
the sample examined, we find no evidence for the association of gravitational
radiation with GRBs, either on a single-GRB basis or on a statistical basis.
Simulating gravitational-wave bursts with sine-gaussian waveforms, we set upper
limits on the root-sum-square of the gravitational-wave strain amplitude of
such waveforms at the times of the GRB triggers. We also demonstrate how a
sample of several GRBs can be used collectively to set constraints on
population models. The small number of GRBs and the significant change in
sensitivity of the detectors over the three runs, however, limits the
usefulness of a population study for the S2, S3, and S4 runs. Finally, we
discuss prospects for the search sensitivity for the ongoing S5 run, and beyond
for the next generation of detectors.Comment: 24 pages, 10 figures, 14 tables; minor changes to text and Fig. 2;
accepted by Phys. Rev.
Searching for a Stochastic Background of Gravitational Waves with LIGO
The Laser Interferometer Gravitational-wave Observatory (LIGO) has performed
the fourth science run, S4, with significantly improved interferometer
sensitivities with respect to previous runs. Using data acquired during this
science run, we place a limit on the amplitude of a stochastic background of
gravitational waves. For a frequency independent spectrum, the new limit is
. This is currently the most sensitive
result in the frequency range 51-150 Hz, with a factor of 13 improvement over
the previous LIGO result. We discuss complementarity of the new result with
other constraints on a stochastic background of gravitational waves, and we
investigate implications of the new result for different models of this
background.Comment: 37 pages, 16 figure
First LIGO search for gravitational wave bursts from cosmic (super)strings
We report on a matched-filter search for gravitational wave bursts from
cosmic string cusps using LIGO data from the fourth science run (S4) which took
place in February and March 2005. No gravitational waves were detected in 14.9
days of data from times when all three LIGO detectors were operating. We
interpret the result in terms of a frequentist upper limit on the rate of
gravitational wave bursts and use the limits on the rate to constrain the
parameter space (string tension, reconnection probability, and loop sizes) of
cosmic string models.Comment: 11 pages, 3 figures. Replaced with version submitted to PR
A Joint Search for Gravitational Wave Bursts with AURIGA and LIGO
The first simultaneous operation of the AURIGA detector and the LIGO
observatory was an opportunity to explore real data, joint analysis methods
between two very different types of gravitational wave detectors: resonant bars
and interferometers. This paper describes a coincident gravitational wave burst
search, where data from the LIGO interferometers are cross-correlated at the
time of AURIGA candidate events to identify coherent transients. The analysis
pipeline is tuned with two thresholds, on the signal-to-noise ratio of AURIGA
candidate events and on the significance of the cross-correlation test in LIGO.
The false alarm rate is estimated by introducing time shifts between data sets
and the network detection efficiency is measured with simulated signals with
power in the narrower AURIGA band. In the absence of a detection, we discuss
how to set an upper limit on the rate of gravitational waves and to interpret
it according to different source models. Due to the short amount of analyzed
data and to the high rate of non-Gaussian transients in the detectors noise at
the time, the relevance of this study is methodological: this was the first
joint search for gravitational wave bursts among detectors with such different
spectral sensitivity and the first opportunity for the resonant and
interferometric communities to unify languages and techniques in the pursuit of
their common goal.Comment: 18 pages, IOP, 12 EPS figure
- …