504 research outputs found
Domains in Melts of Comb-Coil Diblock Copolymers: Superstrong Segregation Regime
Conditions for the crossover from the strong to the superstrong segregation regime are analyzed for the case of comb-coil diblock copolymers. It is shown that the critical interaction energy between the components required to induce the crossover to the superstrong segregation regime is inversely proportional to mb = 1 + n/m, where n is the degree of polymerization of the side chain and m is the distance between successive grafting points. As a result, the superstrong segregation regime, being rather rare in the case of ordinary block copolymers, has a much better chance to be realized in the case of diblock copolymers with combs grafted to one of the blocks.
Recommended from our members
Interactions between lipid-free apolipoprotein-AI and a lipopeptide incorporating the RGDS cell adhesion motif
The interaction of a designed bioactive lipopeptide C16-GGGRGDS, comprising a hexadecyl lipid chain attached to a functional heptapeptide, with the lipid-free apoliprotein, Apo-AI, is examined. This apolipoprotein
is a major component of high density lipoprotein and it is involved in lipid metabolism and may serve as a biomarker for cardiovascular disease and Alzheimersâ disease. We find via isothermal titration calorimetry that binding between the lipopeptide and Apo-AI occurs up to a saturation condition, just above equimolar for a 10.7 ÎŒM concentration of Apo-AI. A similar value is obtained from circular dichroism spectroscopy, which probes the reduction in α-helical secondary structure of Apo-AI upon addition of C16-GGGRGDS. Electron microscopy images show a persistence of fibrillar structures due to self-assembly of C16-GGGRGDS in mixtures with Apo-AI above the saturation binding condition. A small fraction of spheroidal or possibly ânanodiscâ structures was observed. Small-angle X-ray scattering (SAXS) data for
Apo-AI can be fitted using a published crystal structure of the Apo-AI dimer. The SAXS data for the lipopeptide/
Apo-AI mixtures above the saturation binding conditions can be fitted to the contribution from fibrillar structures coexisting with flat discs corresponding to Apo-AI/lipopeptide aggregates
Self-Assembly of Supramolecules Consisting of Octyl Gallate Hydrogen Bonded to Polyisoprene-block-poly(vinylpyridine) Diblock Copolymers
Synchrotron radiation was used to investigate the self-assembly in two comb-shaped supramolecules systems consisting of octyl gallate (OG), i.e., 1-octyl-3,4,5-trihydroxybenzoate, hydrogen bonded to the pyridine groups of polyisoprene-block-poly(vinylpyridine) diblock copolymers. In the case of the 1,2-polyisoprene-block-poly(4-vinylpyridine)(OG)x system, self-assembly was only observed for x â„0.5, where x denotes the number of OG molecules per pyridine group. For x = 0.5, 0.75, 1.0, and 1.2 the system self-assembled in the form of hexagonally ordered cylinders of P4VP(OG) throughout the entire temperature range of 25-200 °C investigated. For the 1,4-polyisoprene-block-poly(2-vinylpyridine)(OG)x system, on the other hand, a considerably more complex phase behavior was found, including the formation of cubic, hexagonally ordered cylinders and lamellar morphologies. In this case several order-order transitions were observed as a function of temperature, including a lamellar to lamellar transition involving a collapse of the layer thickness. The absence of hydrogen bonding between the octyl gallate molecules and the pyridine groups at elevated temperatures is argued to be a key factor for many of the phenomena observed.
Aqueous Self-Assembly of a Protein-Mimetic Ampholytic Block Copolypeptide
This report describes the aggregation behavior of an ABC-type ampholytic block copolypeptide, poly(ethylene oxide)-block-poly(l-lysine)-block-poly(l-glutamate), in aqueous media in dependence of pH. Polypeptide secondary structures and self-assemblies are investigated by circular dichroism (CD), Fourier transform infrared (FT-IR) and NMR spectroscopy, zeta potential measurements, analytical ultracentrifugation (AUC), dynamic/static light scattering (DLS/SLS), and cryogenic transmission electron microscopy (cryo-TEM). The polymer chains tend to form vesicles when the hydrophobic polypeptide helix is located at the chain end (acidic pH) and are existing as single chains when it is located in the center and flanked by the two hydrophilic segments (basic pH). Precipitation occurs in the intermediate pH range due to polyion complexation of the charged polypeptide segments
MESOMORPHIC STATE OF POLY(VINYLPYRIDINE)-DODECYLBENZENESULFONIC ACID COMPLEXES IN BULK AND IN XYLENE SOLUTION
Theoretically, lyotropic behavior of flexible polymers can be induced by associating the polymers with a large amount of long-tail surfactants leading to bottle-brush type conformations in suitable solvents. To address this and related questions, complexes of poly(2-vinylpyridine) (P2VP) and poly(4-vinylpyridine) (P4VP) with p-dodecylbenzenesulfonic acid (DBSA), characterized by FT-IR, were investigated in the bulk and in xylene, i.e., a good solvent for the alkyl side chains. At a 1:1 molar ratio of vinylpyridine monomer and DBS, the polymers are shown by FT-IR to be almost completely protonated. In the bulk, the complexes form mesomorphic layer structures which have been characterized by polarized optical microscopy and by both wide- and small-angle X-ray scattering. In the xylene solutions, birefringence indicating liquid crystallinity is observed for concentrations of the fully protonated P4VP-(DBSA)(1.0) complex of ca. 50% (w/w) and higher. In contrast, for P2VP(DBSA)(1.0), this is only observed at complex concentrations of ca. 70% (w/w) and higher. The mesomorphic behavior of P4VP(DBSA)(1.0) in xylene was further demonstrated by SAXS
Surfactant induced mesomorphic behaviour of flexible polymers
Conditions for micro phase separated structures based on flexible polymers associated with surfactants have been investigated. Reasonably strong attractive interactions are required to oppose macro phase separation between polymer and surfactant. In order to obtain micro phase separation, additionally a sufficiently strong polar-nonpolar repulsion has to be present. Poly(4-vinyl pyridine), poly(2-vinyl pyridine) and polyamide 6 have been used as model polymers in this work. Associations based on protonation, metal coordination and hydrogen bonding are presented and shown to yield micro phase separation under suitable conditions. In the charged systems, the polar-nonpolar repulsion easily becomes large enough to render micro phase separated structures. In hydrogen bonded (i.e. noncharged) systems a more delicate balance can be achieved in which case an order-disorder transition takes place from a homogeneous state, exhibiting nonetheless a distinct SAXS peak due to characteristic block copolymer-like fluctuations, to a micro phase separated ordered state.</p
Self-Assembly of Supramolecular Triblock Copolymer Complexes
Four different poly(tert-butoxystyrene)-b-polystyrene-b-poly(4-vinylpyridine) (PtBOS-b-PS-b-P4VP) linear triblock copolymers, with the P4VP weight fraction varying from 0.08 to 0.39, were synthesized via sequential anionic polymerization. The values of the unknown interaction parameters between styrene and tert-butoxystyrene and between tert-butoxystyrene and 4-vinylpyridine were determined from random copolymer blend miscibility studies and found to satisfy 0.031<ÏS,tBOS<0.034 and 0.39<Ï4VP,tBOS<0.43, the latter being slightly larger than the known 0.30<ÏS,4VPâ€0.35 value range. All triblock copolymers synthesized adopted a P4VP/PS core/shell cylindrical self-assembled morphology. From these four triblock copolymers supramolecular complexes were prepared by hydrogen bonding a stoichiometric amount of pentadecylphenol (PDP) to the P4VP blocks. Three of these complexes formed a triple lamellar ordered state with additional short length scale ordering inside the P4VP(PDP) layers. The self-assembled state of the supramolecular complex based on the triblock copolymer with the largest fraction of P4VP consisted of alternating layers of PtBOS and P4VP(PDP) layers with PS cylinders inside the latter layers. The difference in morphology between the triblock copolymers and the supramolecular complexes is due to two effects: (i) a change in effective composition and, (ii) a reduction in interfacial tension between the PS and P4VP containing domains. The small angle X-ray scattering patterns of the supramolecules systems are very temperature sensitive. A striking feature is the disappearance of the first order scattering peak of the triple lamellar state in certain temperature intervals, while the higher order peaks (including the third order) remain. This is argued to be due to the thermal sensitivity of the hydrogen bonding and thus directly related to the very nature of these systems.
Recommended from our members
Self-assembly, nematic phase formation and organocatalytic behaviour of a proline-functionalized lipopeptide
The self-assembly of the amphiphilic lipopeptide PAEPKI-C16 (P = proline, A = alanine, E = glutamic acid, K = lysine, I = isoleucine, C16 = hexadecyl) was investigated using a combination of spectroscopic, microscopic and scattering methods and compared to C16-IKPEAP with the same (reversed) peptide sequence and the alkyl chain positioned N-terminally and which lacks a free N-terminal proline residue. The catalytic activity of these peptides were then compared using a model aldol reaction system. For PAEPKI-C16, Cryo-TEM images showed the formation of micrometer length fibers, which by Small-angle X-ray scattering (SAXS) were found to have a radius of 2.5 - 2.6 nm. Spectroscopic analysis shows these fibers are built from -sheets. This behaviour is in complete contrast to that of C16-IKPEAP which forms spherical micelles with peptides in a disordered conformation [Hutchinson, J. A. et al. J. Phys. Chem. B 2019, 123, 613]. For PAEPKI-C16, the spontaneous alignment of fibers was observed upon increasing pH, which was accompanied by observed birefringence and anisotropy of SAXS patterns. This shows the formation of a nematic liquids and unprecedented nematic hydrogel formation was also observed these lipopeptides at sufficiently high concentrations. SAXS shows retention of an ultrafine (1.7 nm core radius) fibrillar network within the hydrogel. PAEPKI-C16 with free N-terminal proline shows enhanced anti:syn diastereoselectivity and better conversion compared to C16-IKPEAP. The cytotoxicity of PAEPKI-C16 was also lower than C16-IKPEAP for both fibroblast and cancer cell lines. These results highlight the sensitivity of lipopeptide properties to the presence of a free proline residue. The spontaneous nematic phase formation by PAEPKI-C16 points to the highly anisotropy of its ultrafine fibrillar structure and the formation of such a phase at low concentration in aqueous solution may be valuable for future applications
Information Protection in Dark Web Drug Markets Research
In recent years, there have increasingly been conflicting calls for more government surveillance online and, paradoxically, increased protection of the privacy and anonymity of individuals. Many corporations and groups globally have come under fire for sharing data with law enforcement agencies as well as for refusing to cooperate with said agencies, in order to protect their customers. In this study, we focus on Dark Web drug trading sites as an exemplary case of problematic areas of information protection, and ask what practices should be followed when gathering data from the Dark Web. Using lessons from an ongoing research project, we outline best practices for protecting the safety of the people under study on these sites without compromising the quality of research data gathering
Recommended from our members
Influence of elastase on alanine-rich peptide hydrogels
The self-assembly of the alanine-rich amphiphilic peptides Lys(Ala)6Lys (KA6K) and Lys(Ala)6Glu (KA6E)with homotelechelic or heterotelechelic charged termini respectively has been investigated in aqueous solution. These peptides contain hexa-alanine sequences designed to serve as substrates for the enzyme elastase. Electrostatic repulsion of the lysine termini in KA6K prevents self-assembly, whereas in contrast KA6E is observed, through electron microscopy, to form tape-like fibrils, which based on X-ray scattering contain layers of thickness equal to the molecular length. The alanine residues enable efficient packing of the side-chains in a beta-sheet structure, as revealed by circular dichroism, FTIR and X-ray diffraction
experiments. In buffer, KA6E is able to form hydrogels at sufficiently high concentration. These were used as substrates for elastase, and enzyme-induced de-gelation was observed due to the disruption of the beta-sheet fibrillar network. We propose that hydrogels of the simple designed amphiphilic peptide KA6E may serve as model substrates for elastase and this could ultimately lead to applications in biomedicine and regenerative medicine
- âŠ