Dialectical polyptych: an interactive movie

Most of the known video games developed by big software companies usually establish an approach to the cinematic language in an attempt to create a perfect combination of narrative, visual technique and interaction. Unlike most video games, interactive film narratives normally involve an interruption in time whenever the spectator has to make choices. “Dialectical Polyptych” is an interactive movie included in a project called “Characters looking for a spect-actor”, which aims to give the spectator on-the-fly control over film editing, thus exploiting the role of the spectator as an active subject in the presented narrative. This paper presents a system based on a 3D sensor for tracking the spectator's movements and positions, which allows seamless real-timeinteractivity with the movie. Different positions of the body prompt a change in the angle or shot within each narrative, and hand swipes allow the spectator to alternate between the two parallel narratives, both producing a complementary narrative.info:eu-repo/semantics/publishedVersio

Mass-degenerate Higgs bosons at 125 GeV in the Two-Higgs-Doublet Model

The analysis of the Higgs boson data by the ATLAS and CMS Collaborations appears to exhibit an excess of h --> gamma\gamma events above the Standard Model (SM) expectations; whereas no significant excess is observed in h --> ZZ* --> {four lepton} events, albeit with large statistical uncertainty due to the small data sample. These results (assuming they persist with further data) could be explained by a pair of nearly mass-degenerate scalars, one of which is a SM-like Higgs boson and the other is a scalar with suppressed couplings to W+W- and ZZ. In the two Higgs doublet model, the observed \gamma\gamma and ZZ* --> {four lepton} data can be reproduced by an approximately degenerate CP-even (h) and CP-odd (A) Higgs boson for values of \sin(\beta-\alpha) near unity and 0.7 < \tan\beta < 1. An enhanced \gamma\gamma signal can also arise in cases where m_h ~ m_H, m_H ~ m_A, or m_h ~ m_H ~ m_A. Since the ZZ* --> {four lepton} signal derives primarily from a SM-like Higgs boson whereas the \gamma\gamma signal receives contributions from two (or more) nearly mass-degenerate states, one would expect a slightly different invariant mass peak in the ZZ* --> {four lepton} and \gamma\gamma channels. The phenomenological consequences of such models can be tested with additional Higgs data that will be collected at the LHC in the near future.Comment: 18 pages, 19 pdf figures, v2: references added, v3&v4: added refs and explanation

Assessment of lot shape in business park design

Planning and developing a business park is a complex task, whichdemands integration across various fields of design and knowledge. The first choice to be made in the design process is relate to the zoning process and the definition of the lot layout and landscape. These first decisions will constrain all subsequent decisions concerning utilities, facilities and amenities. For this reason, the assessment of those issues is crucial for the perception of the overall quality of the business park design. The main goal of this work is to present a simple indicator which can assess the lot shape in order to optimize the building form and costs, the use of its open areas, the layout and the economic spacing of roads and the service routes. The indicator lot shape evaluatesthe performance of the lot design solutions according to the concept of compactness

Benchtop SS-OCT – layout and performance evaluation

 Abstract1— Optical coherence tomography (OCT) is a non-invasive biomedical imaging technique that provides high speed and high resolution three dimensional and cross sectional images of biological samples, in vivo and in situ. OCT applications targeting small animals is believed to bring developments in medical techniques, instruments, diagnosis and therapies for a number of human diseases as always have been the case of animal experimentation. With the swept source OCT (SS-OCT) system presented in this work, we were able to achieve performance parameters that meet the requirements to image the retina of small animals. Performance characteristics include 105 dB for system sensitivity, a roll-off below 1 dB/mm over 3 mm depth and an axial resolution of 8 μm. We describe the layout and acquisition/processing solutions towards fast imaging of in vivo samples

Quantitative studies on the enzymatic hydrolysis of milk proteins brought about by cardosins precipitated by ammonium sulfate

Hydrolysis of whey proteins may produce peptide mixtures with better functional properties than the original protein mixture, viz. higher solubilites and lower allergenic effects. Cynara cardunculus is a wild plant that possesses (aspartic) proteases in its flower cells; those enzymes exhibit general proteolytic and specific milk clotting activities, which are rather useful in traditional cheesemaking. This study was thus aimed at characterizing the enzymatic action of crude extracts of said plant after preliminary purification by salting out with ammonium sulfate at two different concentration levels, viz. 30% and 70% saturation. The coagulant activity on milk, and the proteolytic activity using casein and azocasein as substrates, of the crude extract and of each precipitated fraction were measured at 37°C and pH 5.2. The profile of hydrolysis of the major whey proteins, i.e. α-lactalbumin (α-La), β-lactoglobulin (β-Lg) and bovine serum albumin (BSA) was characterized by gel permeation chromatography and polyacrylamide gel electrophoresis (PAGE) in the presence of sodium dodecyl sulfate. The 30% and 70% saturation fractions exhibited lower coagulant and proteolytic specific activities than the crude extract. However, the relative ratio of coagulant to proteolytic activity, which is a useful indicator of appropriateness for cheesemaking, was higher for the partially purified fractions. The extents of hydrolysis of whey proteins brought about by the partially purified extracts were above those by their crude counterpart, but qualitative hydrolysis patterns were essentially identical to each other; by 24 h, α-La was substantially depleted, whereas β-Lg was very poorly hydrolyzed and BSA was only slightly hydrolyzed. The native proteins were converted to lower and lower molecular weight peptides

Optimized Gauss and Cholesky algorithms for using the LMMSE decoder in MIMO/BLAST systems with frequency-selective channels - Reduced-complexity equalization

The LMMSE (Linear Minimum Mean Square Error) algorithm is one of the best linear receivers for DSCDMA (Direct Sequence-Code Division Multiple Access). However, for the case of MIMO/BLAST (Multiple Input, Multiple Output/Bell Laboratories Layered Space Time), the perceived complexity of the LMMSE receiver is taken as too big, and thus other types of receivers are employed, yielding worse results. In this paper, we investigate the complexity of the solution to the LMMSE and the Zero-Forcing (LMMSE without noise estimation) receiver's equations. It will be shown that the equation can be solved with optimized Gauss or Cholesky algorithms. Some of those solutions are very computationally efficient and thus, allow for the usage of the LMMSE in fully-loaded MIMO systems

Polarisation measurements with a CdTe pixel array detector for Laue hard X-ray focusing telescopes

Polarimetry is an area of high energy astrophysics which is still relatively unexplored, even though it is recognized that this type of measurement could drastically increase our knowledge of the physics and geometry of high energy sources. For this reason, in the context of the design of a Gamma-Ray Imager based on new hard-X and soft gamma ray focusing optics for the next ESA Cosmic Vision call for proposals (Cosmic Vision 2015-2025), it is important that this capability should be implemented in the principal on-board instrumentation. For the particular case of wide band-pass Laue optics we propose a focal plane based on a thick pixelated CdTe detector operating with high efficiency between 60-600 keV. The high segmentation of this type of detector (1-2 mm pixel size) and the good energy resolution (a few keV FWHM at 500 keV) will allow high sensitivity polarisation measurements (a few % for a 10 mCrab source in 106s) to be performed. We have evaluated the modulation Q factors and minimum detectable polarisation through the use of Monte Carlo simulations (based on the GEANT 4 toolkit) for on and off-axis sources with power law emission spectra using the point spread function of a Laue lens in a feasible configuration.Comment: 10 pages, 6 pages. Accepted for publication in Experimental Astronom

COMFORT SEAT MODULE - FIRST CLASS COMFORT FOR ALL

The Comfort Seat Module (CSM) is a project developed in the scope of the EDAM focus area of the MIT – Portugal program, within the Product Design and Development course. The team members involved in the project come from several Engineering backgrounds and includes research students and engineering professionals, from different geographical origins. In this project the team had the purpose of designing and developing a solution, from idea into concept and then onto a valid product that could potentially be produced and even marketed. In parallel, the objective was to train the product development competences and team’s working skills as much as possible, considering the physical distance between the team members.info:eu-repo/semantics/publishedVersio

Impact of atomic layer deposited TiO2 on the photocatalytic efficiency of TiO2/w-VA-CNT nanocomposite materials

Titanium oxide (TiO2) has been widely investigated as a photocatalytic material, and the fact that its performance depends on its crystalline structure motivates further research on the relationship between preparation methods and material properties. In this work, TiO2 thin films were grown on non- functionalized wave-like patterned vertically aligned carbon nanotubes (w-VA-CNTs) via the atomic layer deposition (ALD) technique. Grazing incidence X-ray diffraction (GIXRD) analysis revealed that the structure of the TiO2/VA-CNT nanocomposites varied from amorphous to a crystalline phase with increasing deposition temperature, suggesting a “critical deposition temperature” for the anatase crystalline phase formation. On the other hand, scanning transmission electron microscopy (STEM) studies revealed that the non-functionalized carbon nanotubes were conformally and homogeneously coated with TiO2, forming a nanocomposite while preserving the morphology of the nanotubes. X-ray photoelectron spectroscopy (XPS) provided information about the surface chemistry and stoichiometry of TiO2. The photodegradation experiments under ultraviolet (UV) light on a model pollutant (Rhodamine B, RhB) revealed that the nanocomposite comprised of anatase crystalline TiO2 grown at 200 ?C (11.2 nm thickness) presented the highest degradation efficiency viz 55% with an illumination time of 240 min. Furthermore, its recyclability was also demonstrated for multiple cycles, showing good recovery and potential for practical applications.publishe

Biomedical applications of human cathelicidin

[Excerpt] Antimicrobial peptides (AMPs) are good candidates to treat burn wounds, a major cause of morbidity, impaired life quality and resources consumption in developed countries. Tuberculosis (TB), a disease caused by the human pathogen Mycobacterium tuberculosis, represents the second world’s deadliest infectious disease, affecting around 9 million people worldwide in 2013. Of those, about 1.1 million died from the disease. The potential of cathelicin, a human AMP, in the treatment of mycobacteriosis and wound regeneration was assessed in pre-clinical trials. (...