Advances in Spray-Cast Perovskite Solar Cells

Spray-coating is a deposition technique that is widely used in industry and could in principle be used to fabricate perovskite photovoltaic (PV) devices at low cost and high volume. As with any deposition technique, the fabrication of thin films requires optimization of a range of parameter space in order to control film uniformity and homogeneity. This is particularly important in PV fabrication as the quality of the thin film has an important effect on device efficiency. This Perspective summarizes the developments in spray-cast perovskite solar cells made over the past few years, with particular attention paid to strategies employed to control the crystallization of the perovskite. Steady progress has now been made with spray-cast perovskite PV devices recently demonstrated having a power conversion efficiency of 18.3%. We highlight trends within the research field and discuss challenges that will be necessary to drive such techniques toward practical application

Rapid scalable processing of tin oxide transport layers for perovskite solar cells

The development of scalable deposition methods for perovskite solar cell materials is critical to enable the commercialization of this nascent technology. Herein, we investigate the use and processing of nanoparticle SnO2 films as electron transport layers in perovskite solar cells and develop deposition methods for ultrasonic spray coating and slot-die coating, leading to photovoltaic device efficiencies over 19%. The effects of postprocessing treatments (thermal annealing, UV ozone, and O2 plasma) are then probed using structural and spectroscopic techniques to characterize the nature of the np-SnO2/perovskite interface. We show that a brief “hot air flow” method can be used to replace extended thermal annealing, confirming that this approach is compatible with high-throughput processing. Our results highlight the importance of interface management to minimize nonradiative losses and provide a deeper understanding of the processing requirements for large-area deposition of nanoparticle metal oxides

High-efficiency spray-coated perovskite solar cells utilizing vacuum-assisted solution processing

We use ultrasonic spray-coating to fabricate cesium-containing triple-cation perovskite solar cells with a power-conversion efficiency of up to 17.8%. Our fabrication route involves a brief exposure of the partially wet spray-cast films to a low vacuum, a process that is used to control film crystallization. We show that films that are not vacuum-exposed are relatively rough and inhomogeneous, while vacuum-exposed films are smooth and consist of small and densely packed perovskite crystals. The process techniques developed here represent a step toward a scalable and industrially compatible manufacturing process capable of creating stable and high-performance perovskite solar cells

High-Performance Multilayer Encapsulation for Perovskite Photovoltaics

An encapsulation system comprising of a UV‐curable epoxy, a solution processed polymer interlayer, and a glass cover‐slip, is used to increase the stability of methylammonium lead triiodide (CH3NH3PbI3) perovskite planar inverted architecture photovoltaic (PV) devices. It is found this encapsulation system acts as an efficient barrier to extrinsic degradation processes (ingress of moisture and oxygen), and that the polymer acts as a barrier that protects the PV device from the epoxy before it is fully cured. This results in devices that maintain 80% of their initial power conversion efficiency after 1000 h of AM1.5 irradiation. Such devices are used as a benchmark and are compared with devices having initially enhanced efficiency as a result of a solvent annealing process. It is found that such solvent‐annealed devices undergo enhanced burn‐in and have a reduced long‐term efficiency, a result demonstrating that initially enhanced device efficiency does not necessarily result in long‐term stability

SRAO CO Observation of 11 Supernova Remnants in l = 70 to 190 deg

We present the results of 12CO J = 1-0 line observations of eleven Galactic supernova remnants (SNRs) obtained using the Seoul Radio Astronomy Observatory (SRAO) 6-m radio telescope. The observation was made as a part of the SRAO CO survey of SNRs between l = 70 and 190 deg, which is intended to identify SNRs interacting with molecular clouds. The mapping areas for the individual SNRs are determined to cover their full extent in the radio continuum. We used halfbeam grid spacing (60") for 9 SNRs and full-beam grid spacing (120") for the rest. We detected CO emission towards most of the remnants. In six SNRs, molecular clouds showed a good spatial relation with their radio morphology, although no direct evidence for the interaction was detected. Two SNRs are particularly interesting: G85.4+0.7, where there is a filamentary molecular cloud along the radio shell, and 3C434.1, where a large molecular cloud appears to block the western half of the remnant. We briefly summarize the results obtained for individual SNRs.Comment: Accepted for publication in Astrophysics & Space Science. 12 pages, 12 figures, and 3 table

Low‐temperature, scalable, reactive deposition of tin oxide for perovskite solar cells

Tin oxide (SnO x ) electron-extraction layers are fabricated via a reactive electron-beam evaporation process from a metal source under a partial pressure of oxygen. These are then used in standard (n-i-p) architecture perovskite solar cells and achieve power conversion efficiencies up to 19.3%. The SnO x deposition process is performed onto substrates maintained at low temperature compared to similar techniques, with films not requiring any subsequent high-temperature post-deposition annealing. This demonstrates the potential compatibility of reactive electron-beam evaporation with roll-to-roll processing onto flexible polymeric substrates

Nonplanar spray-coated perovskite solar cells

Spray coating is an industrially mature technique used to deposit thin films that combines high throughput with the ability to coat nonplanar surfaces. Here, we explore the use of ultrasonic spray coating to fabricate perovskite solar cells (PSCs) over rigid, nonplanar surfaces without problems caused by solution dewetting and subsequent “run-off”. Encouragingly, we find that PSCs can be spray-coated using our processes onto glass substrates held at angles of inclination up to 45° away from the horizontal, with such devices having comparable power conversion efficiencies (up to 18.3%) to those spray-cast onto horizontal substrates. Having established that our process can be used to create PSCs on surfaces that are not horizontal, we fabricate devices over a convex glass substrate, with devices having a maximum power conversion efficiency of 12.5%. To our best knowledge, this study represents the first demonstration of a rigid, curved perovskite solar cell. The integration of perovskite photovoltaics onto curved surfaces will likely find direct applications in the aerospace and automotive sectors