Method for sequentially processing a multi-level interconnect circuit in a vacuum chamber

An apparatus is disclosed which includes a vacuum system having a vacuum chamber in which wafers are processed on rotating turntables. The vacuum chamber is provided with an RF sputtering system and a dc magnetron sputtering system. A gas inlet introduces various gases to the vacuum chamber and creates various gas plasma during the sputtering steps. The rotating turntables insure that the respective wafers are present under the sputtering guns for an average amount of time such that consistency in sputtering and deposition is achieved. By continuous and sequential processing of the wafers in a common vacuum chamber without removal, the adverse affects of exposure to atmospheric conditions are eliminated providing higher quality circuit contacts and functional device

Method for sequentially processing a multi-level interconnect circuit in a vacuum chamber

The processing of wafer devices to form multilevel interconnects for microelectronic circuits is described. The method is directed to performing the sequential steps of etching the via, removing the photo resist pattern, back sputtering the entire wafer surface and depositing the next layer of interconnect material under common vacuum conditions without exposure to atmospheric conditions. Apparatus for performing the method includes a vacuum system having a vacuum chamber in which wafers are processed on rotating turntables. The vacuum chamber is provided with an RF sputtering system and a DC magnetron sputtering system. A gas inlet is provided in the chamber for the introduction of various gases to the vacuum chamber and the creation of various gas plasma during the sputtering steps

The Interaction Between the Urinary Trypsin Inhibitor and Trypsin

Gel filtration and disc electrophoresis were used as simple and fast techniques for the investigation of the interaction and stoichiometry between UTI and trypsin. UTI appears to possess only a single trypsin binding site. The nature of the interaction between the inhibitor and enzyme appears to be dependent on the concentration ratio of the reactants. When UTI is in excess molar concentration, a single binary complex with trypsin of mol. wt. 95,000 is observed. In the presence of a molar excess of enzyme, this macromolecule is no longer observed, but proteins of mol. wt. 41,000 and 20,000 result. The possibility that UTI may be hydrolyzed to a partially degraded active fragment by the excess enzyme resulting in the formation of a modified inhibitor enzyme complex is proposed

Evaporation of pinned droplets containing polymer - an examination of the important groups controlling final shape

Controlling the final shape resulting from evaporation of pinned droplets containing polymer, is important in the fabrication of P-OLED displays by inkjet printing. Typically, a coffee - ring shape arises, due to the pinning and associated outward capillary flow. For operational reasons, this is undesirable – a flat topography is required. The aim of this work is to understand the important groups governing the shape, to provide a practical guide to ink selection. The theory presented is based on a thin-film lubrication model. The governing equations are solved numerically and continuously track the lateral progression of a liquid/gel front. A large capillary number or large ratio of initial to maximal polymer volume fraction can suppress the coffee-ring. White light interferometry is used to confirm these findings experimentally.This research has been funded by the Engineering & Physical Sciences Research Council, UK and CASE studentship funding from Cambridge Display Technology Ltd., UK. The authors thank Dr Mark Dowling of Cambridge Display Technology Ltd., for help with the experimental setup.This is the final version of the article. It first appeared from Wiley via http://dx.doi.org/10.1002/aic.14777

Evidence of stratification in binary colloidal films from microbeam X-ray scattering: Toward optimizing the evaporative assembly processes for coatings

Colloidal films have many important applications where a layered configuration is desirable, including flexible electronics, anti-reflective coatings, and anti-microbial paints. We report stratification during evaporative film formation in binary colloidal dispersion, probed using a novel microbeam small-angle X-ray scattering (SAXS) technique. To our knowledge, SAXS approaches have not been used to experimentally obtain quantitative data of concentration profiles in multicomponent colloidal films. We measured the local scattering of a film at different vertical locations using a microfocused X-ray beam and determined particle concentrations at different film depths using a linear combination analysis of the mixed film and pure film scattering data. Using small particle size ratios ranging from 2.55 to 1.25, we experimentally observed and quantify three distinct stratification configurations: inverted small on- top, large-on-top, and no stratification. Our results show some agreement with a previously proposed stratification state diagram, although there are some limitations. Experimental verification of these stratification phenomena is critical to fully understanding the physics of particle movement and structure development during film formation, which is crucial for optimizing evaporative assembly processes for coatings.Financial support for this work was provided by the National Science Foundation through award CBET-1335787 and a Department of Education Graduate Assistance in Areas of National Need (GAANN) fellowship for A. J. C., Award P200A160163. This research used beamline 11-BM, CMS, of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704

On an exact solution of the Thomas-Fermi equation for a trapped Bose-Einstein condensate with dipole-dipole interactions

We derive an exact solution to the Thomas-Fermi equation for a Bose-Einstein condensate which has dipole-dipole interactions as well as the usual s-wave contact interaction, in a harmonic trap. Remarkably, despite the non-local anisotropic nature of the dipolar interaction the solution is an inverted parabola, as in the pure s-wave case, but with a different aspect ratio. Various properties such as electrostriction and stability are discussed.Comment: 11 pages, 5 figure

Homeostasis Meets Motivation in the Battle to Control Food Intake.

Signals of energy homeostasis interact closely with neural circuits of motivation to control food intake. An emerging hypothesis is that the transition to maladaptive feeding behavior seen in eating disorders or obesity may arise from dysregulation of these interactions. Focusing on key brain regions involved in the control of food intake (ventral tegmental area, striatum, hypothalamus, and thalamus), we describe how activity of specific cell types embedded within these regions can influence distinct components of motivated feeding behavior. We review how signals of energy homeostasis interact with these regions to influence motivated behavioral output and present evidence that experience-dependent neural adaptations in key feeding circuits may represent cellular correlates of impaired food intake control. Future research into mechanisms that restore the balance of control between signals of homeostasis and motivated feeding behavior may inspire new treatment options for eating disorders and obesity

Reconstruction of the Late Holocene climate and environmental history from North Bolgoda Lake, Sri Lanka, using lipid biomarkers and pollen records

The catastrophic impact and unpredictability of the Indian Ocean Monsoon (IOM) over South Asia are evident from devastating floods, mudslides and droughts in one of the most densely populated regions of the globe. However, our understanding as to how the IOM has varied in the past, as well as its impact on local environments, remains limited. This is particularly the case for Sri Lanka, where erosional landscapes have limited the availability of well-stratified, high-resolution terrestrial archives. Here, we present novel data from an undisturbed sediment core retrieved from the coastal Bolgoda Lake. This includes the presentation of a revised Late Holocene age model as well as an innovative combination of pollen, source-specific biomarkers, and compound-specific stable carbon isotopes of n-alkanes to reconstruct the shifts in precipitation, salinity and vegetation cover. Our record documents variable climate between 3000 years and the present, with arid conditions c. 2334 and 2067 cal a bp. This extreme dry period was preceded and followed by more wet conditions. The high-resolution palaeoenvironmental reconstruction fills a major gap in our knowledge on the ramifications of IOM shifts across South Asia and provides insights during a time of major redistribution of dense human settlements across Sri Lanka.Introduction Background, materials and methods - Study area and site - Sampling - Age–depth model - Biomarker analysis - Compound‐specific carbon isotope analysis - Pollen analysis Results - Chronology and climate zones - Biomarker trends and ratios of n‐alkanes - Triterpenols - δ13C isotopes in n‐alkanes - Pollen Discussion - Palaeoenvironmental implications - Mangrove vegetation, palaeosalinity changes and droughts - Palaeoclimate and palaeoenvironmental reconstruction - Zone 1 (2960 to 2390 cal a bp; 385–252 cm) - Zone 2 (2390 to 1800 cal a bp; 252–140 cm) - Zone 3 (1800 to 1318 cal a bp; 140–60 cm) - Zone 4 (1318 cal a bp to present; 60–0 cm) - South Asian comparisons and potential human implications Conclusion

Rotating strings

Analytical expressions are provided for the configurations of an inextensible, flexible, twistable inertial string rotating rigidly about a fixed axis. Solutions with trivial radial dependence are helices of arbitrary radius and pitch. Non-helical solutions are governed by a cubic equation whose roots delimit permissible values of the squared radial coordinate. Only curves coplanar with the axis of rotation make contact with it.Comment: added to discussion and made small revisions to tex