Sequentially evaporated thin Y-Ba-Cu-O superconductor films: Composition and processing effects

Thin films of YBa2Cu3O(7-beta) have been grown by sequential evaporation of Cu, Y, and BaF2 on SrTiO3 and MgO substrates. The onset temperatures were as high as 93 K while T sub c was 85 K. The Ba/Y ratio was varied from 1.9 to 4.0. The Cu/Y ratio was varied from 2.8 to 3.4. The films were then annealed at various times and temperatures. The times ranged from 15 min to 3 hr, while the annealing temperatures used ranged from 850 C to 900 C. A good correlation was found between transition temperature (T sub c) and the annealing conditions; the films annealed at 900 C on SrTiO3 had the best T sub c's. There was a weaker correlation between composition and T sub c. Barium poor films exhibitied semiconducting normal state resistance behavior while barium rich films were metallic. The films were analyzed by resistance versus temperature measurements and scanning electron microscopy. The analysis of the films and the correlations are reported

A 10 GHz Y-Ba-Cu-O/GaAs hybrid oscillator proximity coupled to a circular microstrip patch antenna

A 10 GHz hybrid Y-Ba-Cu-O / GaAs microwave oscillator proximity coupled to a circular microstrip antenna was designed, fabricated and characterized. The oscillator was a reflection mode type using a GaAs MESFET as the active element. The feedline, transmission lines, RF chokes, and bias lines were all fabricated from YBa2Cu3O(7-x) superconducting thin films on a 1 cm x 1 cm lanthanum aluminate substrate. The output feedline of the oscillator was wire bonded to a superconducting feedline on a second 1 cm x 1 cm lanthanum aluminate substrate, which was in turn proximity coupled to a circular microstrip patch antenna. Antenna patterns from this active patch antenna and the performance of the oscillator measured at 77 K are reported. The oscillator had a maximum output power of 11.5 dBm at 77 K, which corresponded to an efficiency of 10 percent. In addition, the efficiency of the microstrip patch antenna together with its high temperature superconducting feedline was measured from 85 K to 30 K and was found to be 71 percent at 77 4 increasing to a maximum of 87.4 percent at 30 K

How metal films de-wet substrates - identifying the kinetic pathways and energetic driving forces

We study how single-crystal chromium films of uniform thickness on W(110) substrates are converted to arrays of three-dimensional (3D) Cr islands during annealing. We use low-energy electron microscopy (LEEM) to directly observe a kinetic pathway that produces trenches that expose the wetting layer. Adjacent film steps move simultaneously uphill and downhill relative to the staircase of atomic steps on the substrate. This step motion thickens the film regions where steps advance. Where film steps retract, the film thins, eventually exposing the stable wetting layer. Since our analysis shows that thick Cr films have a lattice constant close to bulk Cr, we propose that surface and interface stress provide a possible driving force for the observed morphological instability. Atomistic simulations and analytic elastic models show that surface and interface stress can cause a dependence of film energy on thickness that leads to an instability to simultaneous thinning and thickening. We observe that de-wetting is also initiated at bunches of substrate steps in two other systems, Ag/W(110) and Ag/Ru(0001). We additionally describe how Cr films are converted into patterns of unidirectional stripes as the trenches that expose the wetting layer lengthen along the W[001] direction. Finally, we observe how 3D Cr islands form directly during film growth at elevated temperature. The Cr mesas (wedges) form as Cr film steps advance down the staircase of substrate steps, another example of the critical role that substrate steps play in 3D island formation

Development of Scientific Competences in Chemistry Courses

Enseñar química en los primeros años de educación universitaria es clave en la formación de futuros profesionales, puesto que, además de proveer los conocimientos que aportan las ciencias básicas, contribuye al desarrollo de competencias científicas para que el estudiante resuelva problemas reales, a partir de la búsqueda adecuada de información en fuentes confiables y su lectura, con el propósito de desarrollar habilidades analíticas, críticas y creativas. Es por esto que, como estrategia de innovación pedagógica, el Departamento de Ciencias Básicas de la Universidad de La Salle ha venido implementando desde el año 2016 la formulación de un proyecto de investigación en los cursos de química. En el marco de esta estrategia, desde el II-2018 las autoras se abocaron a la reflexión e implementación de la estrategia didáctica que propende por el desarrollo de competencias científicas en los cursos de Química General, Química Orgánica y Bioquímica desde tareas, investigación y aprendizaje de problemáticas vigentes en Colombia y en el mundo.Abstract: Teaching chemistry in the first years of university education is key in the training of future professionals since, in addition to providing the knowledge of the basic sciences, it contributes to the development of scientific skills that lead to the student to solve real problems, starting from the appropriate search of information in reliable sources and its reading with the purpose of developing analytical, critical and creative skills. Therefore, as a pedagogical innovation strategy, the formulation of a research project in chemistry courses has been implemented since 2016 by the Department of Basic Sciences of the Universidad de La Salle. Within the framework of this strategy, from II-2018 the authors focused on the reflection and implementation of the didactic strategy that depends on the development of scientific competences in the courses of General Chemistry, Organic Chemistry and Biochemistry from tasks, research and learning of current problems in Colombia or in the world

Upper limb impairments associated with spasticity in neurological disorders

<p>Abstract</p> <p>Background</p> <p>While upper-extremity movement in individuals with neurological disorders such as stroke and spinal cord injury (SCI) has been studied for many years, the effects of spasticity on arm movement have been poorly quantified. The present study is designed to characterize the nature of impaired arm movements associated with spasticity in these two clinical populations. By comparing impaired voluntary movements between these two groups, we will gain a greater understanding of the effects of the type of spasticity on these movements and, potentially a better understanding of the underlying impairment mechanisms.</p> <p>Methods</p> <p>We characterized the kinematics and kinetics of rapid arm movement in SCI and neurologically intact subjects and in both the paretic and non-paretic limbs in stroke subjects. The kinematics of rapid elbow extension over the entire range of motion were quantified by measuring movement trajectory and its derivatives; i.e. movement velocity and acceleration. The kinetics were quantified by measuring maximum isometric voluntary contractions of elbow flexors and extensors. The movement smoothness was estimated using two different computational techniques.</p> <p>Results</p> <p>Most kinematic and kinetic and movement smoothness parameters changed significantly in paretic as compared to normal arms in stroke subjects (p < 0.003). Surprisingly, there were no significant differences in these parameters between SCI and stroke subjects, except for the movement smoothness (p ≤ 0.02). Extension was significantly less smooth in the paretic compared to the non-paretic arm in the stroke group (p < 0.003), whereas it was within the normal range in the SCI group. There was also no significant difference in these parameters between the non-paretic arm in stroke subjects and the normal arm in healthy subjects.</p> <p>Conclusion</p> <p>The findings suggest that although the cause and location of injury are different in spastic stroke and SCI subjects, the impairments in arm voluntary movement were similar in the two spastic groups. Our results also suggest that the non-paretic arm in stroke subjects was not distinguishable from the normal, and might therefore be used as an appropriate control for studying movement of the paretic arm.</p