Magnetically controlled torque wrench prevents overtorquing

Magnetically controlled torque wrench produces the required torque values accurately, and prevents overtorquing. The force between a magnet and a soft iron bar on the arms of the wrench constitutes a predetermined maximum torque that cannot be exceeded. So long as the magnetic flux remain constant, the torque remains the same

Compressible sleeve provides automatic centering for grinding or turning of cylinders

Elastomeric sleeve supported on a threaded mandrel automatically centers cylindrical castings for grinding or turning. By expanding the diameter of the sleeve with pressure against the ends, the casting becomes rigidly supported and the surfacing operation can be completed

Stabilization of the γ-Sn phase in tin nanoparticles and nanowires

Structures of Sn nanoparticles and nanowires are studied using density functional theory in conjunction with thermodynamic considerations. Besides the low-temperature α and room-temperature β phases, the high-temperature γ phase is considered. Results show that at ambient temperatures for sizes smaller than 50 nm, metallic β- and γ-Sn nanoparticles are more stable than semimetallic α-Sn ones because of their lower surface energies. Moreover, very small Sn nanostructures, exemplified by nanowires, are expected to exhibit the γ phase even at 0 K

Spin-Correlation Coefficients and Phase-Shift Analysis for p+3^3He Elastic Scattering

Angular Distributions for the target spin-dependent observables A$_{0y}$, A$_{xx}$, and A$_{yy}$ have been measured using polarized proton beams at several energies between 2 and 6 MeV and a spin-exchange optical pumping polarized $^3$He target. These measurements have been included in a global phase-shift analysis following that of George and Knutson, who reported two best-fit phase-shift solutions to the previous global p+$^3$He elastic scattering database below 12 MeV. These new measurements, along with measurements of cross-section and beam-analyzing power made over a similar energy range by Fisher \textit{et al.}, allowed a single, unique solution to be obtained. The new measurements and phase-shifts are compared with theoretical calculations using realistic nucleon-nucleon potential models.Comment: Submitted to Phys. Rev.

Characterization of the aldo-keto reductase 1C gene cluster on pig chromosome 10: possible associations with reproductive traits

BACKGROUND: The rate of pubertal development and weaning to estrus interval are correlated and affect reproductive efficiency of swine. Quantitative trait loci (QTL) for age of puberty, nipple number and ovulation rate have been identified in Meishan crosses on pig chromosome 10q (SSC10) near the telomere, which is homologous to human chromosome 10p15 and contains an aldo-keto reductase (AKR) gene cluster with at least six family members. AKRs are tissue-specific hydroxysteroid dehydrogenases that interconvert weak steroid hormones to their more potent counterparts and regulate processes involved in development, homeostasis and reproduction. Because of their location in the swine genome and their implication in reproductive physiology, this gene cluster was characterized and evaluated for effects on reproductive traits in swine. RESULTS: Screening the porcine CHORI-242 BAC library with a full-length AKR1C4 cDNA identified 7 positive clones and sample sequencing of 5 BAC clones revealed 5 distinct AKR1C genes (AKR1CL2 and AKR1C1 through 4), which mapped to 126–128 cM on SSC10. Using the IMpRH(7000rad )and IMNpRH2(12000rad )radiation hybrid panels, these 5 genes mapped between microsatellite markers SWR67 and SW2067. Comparison of sequence data with the porcine BAC fingerprint map show that the cluster of genes resides in a 300 kb region. Twelve SNPs were genotyped in gilts observed for age at first estrus and ovulation rate from the F8 and F10 generations of one-quarter Meishan descendants of the USMARC resource population. Age at puberty, nipple number and ovulation rate data were analyzed for association with genotypes by MTDFREML using an animal model. One SNP, a phenylalanine to isoleucine substitution in AKR1C2, was associated with age of puberty (p = 0.07) and possibly ovulation rate (p = 0.102). Two SNP in AKR1C4 were significantly associated with nipple number (p ≤ 0.03) and another possibly associated with age at puberty (p = 0.09). CONCLUSION: AKR1C genotypes were associated with nipple number as well as possible effects on age at puberty and ovulation rate. The estimated effects of AKR1C genotypes on these traits suggest that the SNPs are in incomplete linkage disequilibrium with the causal mutations that affect reproductive traits in swine. Further investigations are necessary to identify these mutations and understand how these AKR1C genes affect these important reproductive traits. The nucleotide sequence data reported have been submitted to GenBank and assigned accession numbers [GenBank:DQ474064–DQ474068, GenBank:DQ494488–DQ494490 and GenBank:DQ487182–DQ487184]

Understanding adhesion at as-deposited interfaces from ab initio thermodynamics of deposition growth: thin-film alumina on titanium carbide

We investigate the chemical composition and adhesion of chemical vapour deposited thin-film alumina on TiC using and extending a recently proposed nonequilibrium method of ab initio thermodynamics of deposition growth (AIT-DG) [Rohrer J and Hyldgaard P 2010 Phys. Rev. B 82 045415]. A previous study of this system [Rohrer J, Ruberto C and Hyldgaard P 2010 J. Phys.: Condens. Matter 22 015004] found that use of equilibrium thermodynamics leads to predictions of a non-binding TiC/alumina interface, despite the industrial use as a wear-resistant coating. This discrepancy between equilibrium theory and experiment is resolved by the AIT-DG method which predicts interfaces with strong adhesion. The AIT-DG method combines density functional theory calculations, rate-equation modelling of the pressure evolution of the deposition environment and thermochemical data. The AIT-DG method was previously used to predict prevalent terminations of growing or as-deposited surfaces of binary materials. Here we extent the method to predict surface and interface compositions of growing or as-deposited thin films on a substrate and find that inclusion of the nonequilibrium deposition environment has important implications for the nature of buried interfaces.Comment: 8 pages, 6 figures, submitted to J. Phys.: Condens. Matte

Identification of Quantitative Trait Loci Affecting Female Reproductive Traits in a Multigeneration Meishan-White Composite Swine Population

A multigeneration crossbred Meishan- White composite resource population was used to identify quantitative trait loci (QTL) for age at first estrus (AP) and the components of litter size: ovulation rate (OR; number of ova released in an estrous period) and uterine capacity (UC). The population was established by reciprocally mating Meishan (ME) and White composite (WC) pigs. Resultant F1 females were mated to either ME or WC boars to produce backcross progeny (BC) of either ¾ WC ¼ ME or ¼ WC ¾ ME. To produce the next generation (F3) , ¾ WC ¼ ME animals were mated to ¼ WC ¾ ME animals yielding half-blood (½ WC ½ ME) progeny. A final generation (F4) was produced by inter se mating F3 animals. Measurements for AP and OR were recorded on 101 BC, 389 F3, and 110 F4 gilts, and UC data were from 101 BC and 110 F4 first parity litters. A genomic scan was conducted with markers (n = 157) spaced &#;20 cM apart. All parental, F1, BC, and F4 animals but only 84 F3 animals were genotyped and included in this study. The QTL analysis fitted a QTL at 1-cM intervals throughout the genome, and QTL effects were tested using approximate genome-wide significance levels. For OR, a significant (E[false positive] \u3c .05) QTL was detected on chromosome 8, suggestive (E[false positive] \u3c 1.0) QTL were detected on chromosomes 3 and 10, and two additional regions were detected that may possess a QTL (E[false positive] \u3c 2.0) on chromosomes 9 and 15. Two regions possessed suggestive evidence for QTL affecting AP on chromosomes 1 and 10, and one suggestive region on chromosome 8 was identified for UC. Further analyses of other populations of swine are necessary to determine the extent of allelic variation at the identified QTL

Cardiovascular safety of growth hormone treatment in Noonan syndrome: real-world evidence

OBJECTIVE: To assess cardiovascular (CV) safety of growth hormone (GH) treatment in patients with Noonan syndrome (NS) in clinical practice. DESIGN: Two observational, multicentre studies (NordiNet® IOS and the ANSWER Program) evaluating long-term effectiveness and safety of GH in >38,000 paediatric patients, of which 421 had NS. METHODS: Serious adverse events, serious adverse reactions (SARs), and non-serious adverse reactions (NSARs) were reported by the treating physicians. CV comorbidities at baseline and throughout the studies were also recorded. RESULTS: The safety analysis set comprised 412 children with NS (29.1% females), with a mean (standard deviation) baseline age of 9.29 (3.88) years, treated with an average GH dose of 0.047 (0.014) mg/kg/day during childhood. CV comorbidities at baseline were reported in 48 (11.7%), most commonly pulmonary valve stenosis and atrial septal defects. Overall, 22 (5.3%) patients experienced 34 safety events. The most common were the NSARs: headache (eight events in seven patients) and arthralgia (five events in three patients). Two SARs occurred in one patient (brain neoplasm and metastases to spine). No CV safety events were recorded in patients with NS. Five CV comorbidities in five patients were reported after initiation of GH treatment: three cases of unspecified CV disease, one ruptured abdominal aortic aneurysm and one pulmonary valve stenosis. CONCLUSIONS: GH treatment had a favourable safety profile in patients with NS, including those with CV comorbidities. Prospective studies are warranted to systematically assess the safety of GH treatment in patients with Noonan syndrome and CV disease

Characterisation of the photolytic HONO-source in the atmosphere simulation chamber SAPHIR

HONO formation has been proposed as an important OH radical source in simulation chambers for more than two decades. Besides the heterogeneous HONO formation by the dark reaction of NO₂ and adsorbed water, a photolytic source has been proposed to explain the elevated reactivity in simulation chamber experiments. However, the mechanism of the photolytic process is not well understood so far. As expected, production of HONO and NO_x was also observed inside the new atmospheric simulation chamber SAPHIR under solar irradiation. This photolytic HONO and NO_x formation was studied with a sensitive HONO instrument under reproducible controlled conditions at atmospheric concentrations of other trace gases. It is shown that the photolytic HONO source in the SAPHIR chamber is not caused by NO₂ reactions and that it is the only direct NO_y source under illuminated conditions. In addition, the photolysis of nitrate which was recently postulated for the observed photolytic HONO formation on snow, ground, and glass surfaces, can be excluded in the chamber. A photolytic HONO source at the surface of the chamber is proposed which is strongly dependent on humidity, on light intensity, and on temperature. An empirical function describes these dependencies and reproduces the observed HONO formation rates to within 10%. It is shown that the photolysis of HONO represents the dominant radical source in the SAPHIR chamber for typical tropospheric O₃/H₂O concentrations. For these conditions, the HONO concentrations inside SAPHIR are similar to recent observations in ambient air