Tribological behaviour of copper oxide nanoparticle suspension

This work presents and discusses the tribological behaviour of nanoparticle suspensions in a polyalphaolefin (PAO6). CuO nanoparticles were separately dispersed at 0.5, 1.0 and 2.0% wt. in PAO6 using an ultrasonic probe for 2 minutes. AW properties were obtained using a TE53SLIM tribometer with a block-on-ring configuration and EP properties were obtained using a Four-Ball machine according to ASTM D2783. Wear surfaces were analyzed by SEM and EDS after tests. The study led to the following conclusions: nanoparticle suspensions exhibited reductions in friction and wear compared to the base oil; CuO suspensions showed the highest friction coefficient and lowest wear per nanoparticle content of 2%; all concentrations of nanoparticles improved the EP properties of PAO6; CuO showed better results at 0.5% wt. of nanoparticles; and the antiwear mechanism of nanoparticulate additive was produced by tribo-sintering

Sex-related differences in chromatic sensitivity

Generally women are believed to be more discriminating than men in the use of colour names and this is often taken to imply superior colour vision. However, if both X-chromosome linked colour deficient males (~8%) and females (<1%) as well as heterozygote female carriers (~15%) are excluded from comparisons, then differences between men and women in red-green colour discrimination have been reported as not being significant (e.g., Pickford, 1944; Hood et al., 2006). We re-examined this question by assessing the performance of 150 males and 150 females on the Colour Assessment and Diagnosis (CAD) test (Rodriguez-Carmona, 2005). This is a sensitive test that yields small colour detection thresholds. The test employs direction-specific, moving, chromatic stimuli embedded in a background of random, dynamic, luminance contrast noise. A four-alternative, forced-choice procedure is employed to measure the subject’s thresholds for detection of colour signals in 16 directions in colour space, while ensuring that the subject cannot make use of any residual luminance contrast signals. In addition, we measured the Rayleigh anomaloscope matches in a subgroup of 111 males and 114 females. All the age-matched males (30.8 ± 9.7) and females (26.7 ± 8.8) had normal colour vision as diagnosed by a battery of conventional colour vision tests. Females with known colour deficient relatives were excluded from the study. Comparisons between the male and female groups revealed no significant differences in anomaloscope midpoints (p=0.709), but a significant difference in matching ranges (p=0.040); females on average tended to have a larger mean range (4.11) than males (3.75). Females also had significantly higher CAD thresholds than males along the red-green (p=0.0004), but not along the yellow-blue discrimination axis. The differences between males and females in red-green discrimination may be related to the heterozygosity in X-linked cone photopigment expression common among females

Viscosity and tribology of copper oxide nanofluids

Nanofluids, a term proposed by Choi in 1995 [1], are composites consisting of solid nanoparticles with sizes varying generally from 1 to 100 nm dispersed in a liquid. Numerous nanoparticles used as oil additives have been investigated in recent years [2-7]. Results show that they deposit on the rubbing surface and improve the tribological properties of the base oil, displaying good friction and wear reduction characteristics even at concentrations below 2%wt. Although the viscosity of the nanofluids is a property of crucial importance for film forming, and hence friction and wear reduction, which are characteristic of lubricants, only Hwang et al. [8] have studied thermal characteristics, kinematic viscosity and tribological properties of nanofluids simultaneously. In this paper, we present measurements of dynamic viscosity of nanofluids formed by copper oxide nanoparticles dispersed in a polyalphaolefin, for temperatures and concentrations varying from 20 to 60ºC and 0.5 to 2% wt., respectively. Dependence of the nanofluid viscosity to the solid fraction and temperature was compared with existing models and its influence on lubrication was also analysed

Coupling between counterpropagating cladding modes in fiber Bragg gratings

We present an experimental demonstration of energy transfer between counterpropagating cladding modes in a fiber Bragg grating (FBG). A strong FBG written in a standard photosensitive optical fiber is illuminated with a single cladding mode, and the power transferred between the forward propagating cladding mode and different backward propagating cladding modes is measured by using two auxiliary long period gratings. Resonances between cladding modes having 30 pm bandwidth and 8 dB rejection have been observed

Electromyographic, cerebral, and muscle hemodynamic responses during intermittent, isometric contractions of the biceps brachii at three submaximal intensities.

This study examined the electromyographic, cerebral and muscle hemodynamic responses during intermittent isometric contractions of biceps brachii at 20, 40, and 60% of maximal voluntary contraction (MVC). Eleven volunteers completed 2 min of intermittent isometric contractions (12/min) at an elbow angle of 90° interspersed with 3 min rest between intensities in systematic order. Surface electromyography (EMG) was recorded from the right biceps brachii and near infrared spectroscopy (NIRS) was used to simultaneously measure left prefrontal and right biceps brachii oxyhemoglobin (HbO2), deoxyhemoglobin (HHb), and total hemoglobin (Hbtot). Transcranial Doppler ultrasound was used to measure middle cerebral artery velocity (MCAv) bilaterally. Finger photoplethysmography was used to record beat-to-beat blood pressure and heart rate. EMG increased with force output from 20 to 60% MVC (P &lt; 0.05). Cerebral HbO2 and Hbtot increased while HHb decreased during contractions with differences observed between 60% vs. 40% and 20% MVC (P &lt; 0.05). Muscle HbO2 decreased while HHb increased during contractions with differences being observed among intensities (P &lt; 0.05). Muscle Hbtot increased from rest at 20% MVC (P &lt; 0.05), while no further change was observed at 40 and 60% MVC (P &gt; 0.05). MCAv increased from rest to exercise but was not different among intensities (P &gt; 0.05). Force output correlated with the root mean square EMG and changes in muscle HbO2 (P &lt; 0.05), but not changes in cerebral HbO2 (P &gt; 0.05) at all three intensities. Force output declined by 8% from the 1st to the 24th contraction only at 60% MVC and was accompanied by systematic increases in RMS, cerebral HbO2 and Hbtot with a leveling off in muscle HbO2 and Hbtot. These changes were independent of alterations in mean arterial pressure. Since cerebral blood flow and oxygenation were elevated at 60% MVC, we attribute the development of fatigue to reduced muscle oxygen availability rather than impaired central neuronal activation

Phacoemulsification of the crystalline lens and implantation of an intraocular lens for the correction of moderate and high myopia: Four-year follow-up

Purpose: To assess the safety of lens extraction and intraocular lens (IOL) implantation in patients with high myopia treated for initial lens opacity and/or refractive indications. Setting: Instituto de Microcirugfa Ocular de Barcelona, Barcelona, Spain. Methods: This retrospective nonrandomized case series study comprised 44 eyes of 30 consecutive myopic patients who had surgery because of initial lens opacity and/or refractive indications during a 2-year period. In each case, phacoemulsification was performed using an ultrasonic technique and an IOL was implanted in the capsular bag. The patients were seen preoperatively to evaluate retinal pathology. They also had a complete ophthalmologic evaluation that included detailed indirect ophthalmoscopy. All patients were followed at regular intervals. The main outcome measures were preoperative and postoperative-spherical equivalent (SE), the incidence of posterior capsule opacification (PCO) and the need for capsulotomy, and the incidence of retinal complications. Results: In all eyes, the surgery was uneventful. The mean patient age at surgery was 42.83 years; the mean preoperative SE was -15.77 diopters (D) and the mean postoperative SE, -1.05 D. No eye required preoperative peripheral retinal photocoagulation. Twenty-five eyes (56.8%) had PCO and had a neodymium:YAG laser capsulotomy. One eye had a retinal tear 14 months after surgery and was treated with focal photocoagulation. The mean endothelial cell loss was 2.1% during the first postoperative year. Two eyes had an immediate postoperative intraocular pressure (IOP)rise, 1 with an inflammatory membrane and the other with corneal edema; both resolved with topical treatment. One eye with elevated IOP and a bad response to medical treatment had argon laser trabeculoplasty. No eye had a retinal detachment during the follow-up. Conclusion: With a thorough preoperative ophthalmologic evaluation and uneventful surgery, patients who have phacoemulsification and IOL implantation for the correction of myopia have a satisfactory chance of obtaining good visual results with few complications. ©2003 ASCRS and ESCRS

A probabilistic fatigue crack growth life approach to the definition of inspection intervals for railway axles

Different options that rely on fracture mechanics are currently used in engineering during the design and assessment of components. One of the most important aspects is the time taken for a crack to extend to its critical size. If this time is long enough, a design concept based on inspection intervals can be applied, as is it the case of a railway axle component. To define inspection intervals that ensure the continuous and safe operation of a damage-tolerant railway axle, a reliable estimation of its fatigue crack growth life is required. Due to the uncertainties involved in the fatigue process, inspections must be devised not only considering the uncertainties in the performance of the inspection technique, but also based on a probabilistic lifespan prediction. From this premise, this paper presents a procedure for determination of inspection intervals that uses a conservative fatigue crack growth life estimation based on the lifespan probability distribution. A practical example to illustrate the reliability-based inspection planning methodology in a railway axle under random bending loading is given. The inspection intervals are further assessed in terms of overall probability of detecting cracks in successive inspections and in terms of probability of failure, considering the probability of detection curve of the non-destructive testing technique. The procedure developed provides recommendation for the definition of inspection intervals and associated inspection techniques

Tribological behavior of oils additised with a phosphonium-derived ionic liquid compared to a commercial oil

Purpose: The purpose of this paper is to study the antifriction, antiwear and tribolayer formation properties of the trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate ionic liquid (IL) as additive at 1 wt.% in two base oils and their mixtures, comparing the results with those of a commercial oil. Design/methodology/approach: The mixture of the base oils used in the formulation of the commercial oil SAE 0W20 plus the IL was tested under rolling/sliding and reciprocating conditions to determine the so-called Stribeck curve, the tribolayer formation and the antifriction and antiwear behaviors. Findings: The use of this IL as additive in these oils does not change their viscosity; improves the antifriction and antiwear properties of the base oils, making equal or outperforming these properties of the SAE 0W20; and the thickness and formation rate of the tribolayer resulting from the IL-surface interaction is highly dependent on the type of base oil and influence on the friction and wear results. Originality/value: The use of this IL allows to replace partial or totally commercial antifriction and antiwear additives. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0179/