Dual-Band Integrated Antennas for DVB-T Receivers

An overview on compact Planar Inverted-F Antennas (PIFAs) that are suitable for monitor-equipped devices is presented. In particular, high efficiency PIFAs (without any dielectric layer) with a percentage bandwidth (%BW) greater than 59% (470–862 MHz DVB-T band) are considered. In this context, two PIFA configurations are reviewed, where a dual-band feature has been obtained, in the 3300–3800 MHz (14% percentage bandwidth) WiMAX and 2400–2484 MHz (2.7% percentage bandwidth) WLAN IEEE 802.11b,g frequency bands, respectively, to also guarantee web access to on-demand services. The two PIFAs fill an overall volume of  mm3 and  mm3, respectively. They are composed of a series of branches, properly dimensioned and separated to generate the required resonances. Finally, to show the extreme flexibility of the previous two configurations, a novel dual-band L-shape PIFA has been designed. A reflection coefficient less than −6 dB and −10 dB and an antenna gain of around 2 dBi and 6.3 dBi have been obtained in the 470–862 MHz DVB-T band and the 2400–2484 MHz WLAN band, respectively. The L-shape PIFA prototype can be obtained by properly cutting and folding a single metal sheet, thus resulting in a relatively low-cost and mechanically robust antenna configuration

Design and test of the Digital Opto Hybrid Module for the CMS Tracker Inner Barrel and Disks.

One of the most important tasks to be performed in the CMS Tracker detector is the communication between hundreds of silicon modules and the central Control System under the supervision of the Data Acquisition System. To manage such complexity, modules are grouped in a hierarchical structure. Each group is controlled by a Communication and Control Unit (CCU). Several CCU form a ring with a Front End Controller as master. The entire Tracker Inner Barrel and Disks detector contains roughly 100 such rings called Control Rings. A description is given here of the implemented ring architecture for the detector and of the solutions found to provide a reliable and easy way to interconnect these groups

ITA-MNGIE: an Italian regional and national survey for mitochondrial neuro-gastro-intestinal encephalomyopathy

Mitochondrial neuro-gastro-intestinal encephalomyopathy (MNGIE) is a rare and unavoidably fatal disease due to mutations in thymidine phosphorylase (TP). Clinically it is characterized by gastrointestinal dysfunction, malnutrition/cachexia and neurological manifestations. MNGIE diagnosis remains a challenge mainly because of the complexity and rarity of the disease. Thus, our purposes were to promote a better knowledge of the disease in Emilia-Romagna region (ERR) by creating an accurate and dedicated network; to establish the minimal prevalence of MNGIE in Italy starting from ERR. Blood TP activity level was used as screening test to direct candidates to complete diagnostic work-up. During the study period of 1 year, only 10/71 units of ERR recruited 14 candidates. Their screening did not show TP activity changes. An Italian patient not resident in ERR was actually proved to have MNGIE. At the end of study in Italy there were nine cases of MNGIE; thus, the Italian prevalence of the disease is ~0.15/1,000,000 as a gross estimation. Our study confirms that MNGIE diagnosis is a difficult process which reflects the rarity of the disease and, as a result, a low level of awareness among specialists and physicians. Having available novel therapeutic options (e.g., allogenic hematopoietic stem cell transplantation and, more recently, liver transplantation) and an easy screening test, an early diagnosis should be sought before tissue damage occurs irreversibly

Improvement of a coastal vulnerability index and its application along the Calabria Coastline, Italy

The present paper further develops a coastal vulnerability index formulation (CVI) previously proposed by the authors by integrating a new variable and redefining three variables to improve the suitability of the index for low-lying coasts. Eleven variables are divided into three typological groups: geological, hydro-physical process and vegetation. The geological variables are: geomorphology, shoreline erosion/accretion rates, coastal slope, emerged beach width, and dune. The hydro-physical process group includes: river discharge, sea-level change, mean significant wave height and mean tide range. The vegetation variables are: vegetation behind the back-beach and coverage of Posidonia oceanica. The index was applied to a stretch of the Ionian coast in the province of Crotone in the Calabria region (Southern Italy), and a vulnerability map was produced. A geography information system (GIS) platform was used to better process the data. For the case study area, the most influential variables are shoreline erosion/accretion rates, coastal slope, emerged beach width, dune, vegetation behind the back-beach, and coverage of Posidonia oceanica. The most vulnerable transects are those near urban areas characterized by the absence of dunes and vegetation. Statistical and sensitivity analyses were performed, and the proposed CVI was compared with the previous formulation proposed by the authors and with two other CVI methods present in the literature

Formulation and assessment of Wash-Primer containing lanthanum tannate for steel temporary protection

Tannins are polyphenols synthesized by plants and useful for the coating industry as corrosion inhibitors. In addition, lanthanum salts have a great inhibitory effect on steel corrosion. The aim of this study was to obtain lanthanum ‘‘tannate’’ with adequate solubility to be incorporated as the corrosion inhibitor in a wash-primer. The ‘‘tannate’’ was obtained from commercial ‘‘Quebracho’’ tannin and 0.1 M La(NO3)3. The soluble tannin was determined by the Folin–Denis reagent, while the concentration of Lanthanum was obtained by a gravimetric procedure. The protective action of ‘‘tannate’’ on SAE 1010 steel was evaluated by linear polarization curves and corrosion potential measurements. Lanthanum ‘‘tannate’’ was incorporated in a wash-primer formulation and tested by corrosion potential and ionic resistance measurements. The corrosion rate was also determined by the polarization resistance technique. Besides, the primer was incorporated in an alkyd paint system and its anticorrosion performance assessed in the salt spray cabinet and by electrochemical impedance spectroscopy. Results showed that lanthanum ‘‘tannate’’ primer inhibits the development of deleterious iron oxyhydroxides on the steel substrate and incorporated into a paint system had a similar behavior to the primer formulated with zinc tetroxychromate.Centro de Investigación y Desarrollo en Tecnología de Pintura

Formulation and assessment of Wash-Primer containing lanthanum tannate for steel temporary protection

Tannins are polyphenols synthesized by plants and useful for the coating industry as corrosion inhibitors. In addition, lanthanum salts have a great inhibitory effect on steel corrosion. The aim of this study was to obtain lanthanum ‘‘tannate’’ with adequate solubility to be incorporated as the corrosion inhibitor in a wash-primer. The ‘‘tannate’’ was obtained from commercial ‘‘Quebracho’’ tannin and 0.1 M La(NO3)3. The soluble tannin was determined by the Folin–Denis reagent, while the concentration of Lanthanum was obtained by a gravimetric procedure. The protective action of ‘‘tannate’’ on SAE 1010 steel was evaluated by linear polarization curves and corrosion potential measurements. Lanthanum ‘‘tannate’’ was incorporated in a wash-primer formulation and tested by corrosion potential and ionic resistance measurements. The corrosion rate was also determined by the polarization resistance technique. Besides, the primer was incorporated in an alkyd paint system and its anticorrosion performance assessed in the salt spray cabinet and by electrochemical impedance spectroscopy. Results showed that lanthanum ‘‘tannate’’ primer inhibits the development of deleterious iron oxyhydroxides on the steel substrate and incorporated into a paint system had a similar behavior to the primer formulated with zinc tetroxychromate.Centro de Investigación y Desarrollo en Tecnología de Pintura

Territorialidade elétrica na formação do espaço urbano no Noroeste paulista (1901-1927)

Electricity was timidly established in 1893, in the interior of the state of Sao Paulo (Brazil), in a pre-industrial society. Its advance towards the Midwest and northwest, at the dawn of the twentieth century, firmly followed the path of the railroads, mainly the Estrada de Ferro Noroeste do Brasil (1905) departing from the municipality of Bauru. The “electrical advance” implied in technological knowledge and the formation of the qualified elite, headed by the engineers of the Polytechnic School of Sao Paulo, which associated with the local oligarchy, became industrialists, constituting the first large company with national financial capital: the Companhia Paulista de Força e Luz – CPFL.La electricidad se estableció tímidamente en 1893, en el interior del estado de São Paulo, en una sociedad preindustrial. Su avance hacia el Medio Oeste y Noroeste, en los albores del siglo XX, siguió el camino de los ferrocarriles, principalmente la Estrada de Ferro Noroeste do Brasil (1905) con salida desde el municipio de Bauru. El “avance eléctrico” implicó conocimiento tecnológico y la formación de una élite calificada, encabezada por ingenieros de la Escuela Politécnica de São Paulo que, asociados a oligarquías locales, se convirtieron en industriales, constituyendo la primera gran empresa eléctrica de capital nacional: la Companhia Paulista de Fuerza. y Luz - CPFL.A eletricidade estabeleceu-se timidamente em 1893, no interior do estado de São Paulo, numa sociedade pré-industrial. Seu avanço rumo ao centro-oeste e noroeste no alvorecer do século XX, seguiu firme a trajetória das ferrovias, principalmente a Estrada de Ferro Noroeste do Brasil (1905) partindo do município de Bauru. O “avanço elétrico” implicou em conhecimento tecnológico e formação de uma elite habilitada, capitaneada por engenheiros da Escola Politécnica de São Paulo que associados às oligarquias locais transformaram-se em industriais, constituindo a primeira grande empresa de eletricidade de capital nacional: a Companhia Paulista de Força e Luz - CPFL