Three-dimensional virtual bone bank system workflow for structural bone allograft selection: a technical report

Structural bone allograft has been used in bone defect reconstruction during the last fifty years with acceptable results. However, allograft selection methods were based on 2-dimensional templates using X-rays.Thanks to preoperative planning platforms, three dimensional (3D) CT-derived bone models were used to define size and shape comparison between host and donor. The purpose of this study was to describe the workflow of this virtual technique in order to explain how to choose the best allograft using a virtualbone bank system. We measured all bones in a 3D virtual environment determining the best match. The use of a virtual bone banksystem has allowed optimizing the allograft selection in a bone bank, providing more information to the surgeons before surgery.In conclusion, 3D preoperative planning in a virtual environment for allograft selection is an important and helpful tool in order to achieve a good match between host and donor.Fil: Ritacco, Lucas. Hospital Italiano; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Farfalli, Germán Luis. Hospital Italiano; ArgentinaFil: Milano, Federico Edgardo. Hospital Italiano; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Ayerza, Miguel Ángel. Hospital Italiano; ArgentinaFil: Muscolo, Domingo L.. Hospital Italiano; Argentina. Hospital Italiano; ArgentinaFil: Aponte Tinao, Luis. Hospital Italiano; Argentin

Automatic Scan Planning for Magnetic Resonance Imaging of the Knee Joint

Automatic scan planning for magnetic resonance imaging of the knee aims at defining an oriented bounding box around the knee joint from sparse scout images in order to choose the optimal field of view for the diagnostic images and limit acquisition time. We propose a fast and fully automatic method to perform this task based on the standard clinical scout imaging protocol. The method is based on sequential Chamfer matching of 2D scout feature images with a three-dimensional mean model of femur and tibia. Subsequently, the joint plane separating femur and tibia, which contains both menisci, can be automatically detected using an information-augmented active shape model on the diagnostic images. This can assist the clinicians in quickly defining slices with standardized and reproducible orientation, thus increasing diagnostic accuracy and also comparability of serial examinations. The method has been evaluated on 42 knee MR images. It has the potential to be incorporated into existing systems because it does not change the current acquisition protoco

Allograft Selection for Transepiphyseal Tumor Resection Around the Knee Using Three-Dimensional Surface Registration

Transepiphyseal tumor resection is a common surgical procedure in patients with malignant bone tumors. The aim of this study is to develop and validate a computer-assisted method for selecting the most appropriate allograft from a cadaver bone bank. Fifty tibiae and femora were 3D reconstructed from computed tomography (CT) images. A transepiphyseal resection was applied to all of them in a virtual environment. A tool was developed and evaluated that compares each metaphyseal piece against all other bones in the data bank. This is done through a template matching process, where the template is extracted from the contralateral healthy bone of the same patient. The method was validated using surface distance metrics and statistical tests comparing it against manual methods. The developed algorithm was able to accurately detect the bone segment that best matches the patient's anatomy. The automatic method showed improvement over the manual counterpart. The proposed method also substantially reduced computation time when compared to state-of-the-art methods as well as the manual selection. Our findings suggest that the accuracy, robustness, and speed of the developed method are suitable for clinical trials and that it can be readily applied for preoperative allograft selectio

Total Temporomandibular Joint Replacement and Simultaneous Orthognathic Surgery Using Computer-Assisted Surgery

Background: Disorders of the temporomandibular joint (TMJ) are frequent and are usually associated with other disorders of the facial skeleton. Surgery might be needed to correct TMJ anatomy and function and, in cases where pathologies coexist, a two-stage corrective surgery might be needed. However, the current fashion of single-stage procedures is feasible with the aid of new technologies such as computer-assisted surgery (CAS). This is a step forward toward performing complex procedures such as a TMJ replacement with simultaneous orthognathic surgery. CAS allows designing patient-fitted prosthesis and more predictable and accurate surgeries. Moreover, intraoperative development can be controlled in real time with intraoperative navigation, and postoperative results can be measured and compared afterwards. Aims: The primary purpose of this article is to present the protocol used in our institution for orthognathic surgery associated with unilateral and bilateral TMJ replacement with patient-fitted prostheses guided with CAS. Materials and methods: We present two cases to illustrate our protocol and its results. Results: In the first case, the difference in millimeters between planning and surgical outcomes was 1.72 mm for the glenoid component and 2.16 mm for the condylar prosthesis; for the second case, differences in the right side were 2.59 mm for the glenoid component and 2.06 mm for the ramus, and in the left side, due to the anatomy the difference was a little greater, without clinical significance Conclusion: Combined surgery of the midface and mandible with total TMJ replacement is feasible and beneficial for the patient. CAS facilitates the planning and design of custom-fit prosthesis and execution of these procedures.Fil: Gomez, Natalia Lucia. Instituto Universidad Escuela de Medicina del Hospital Italiano; ArgentinaFil: Boccalatte, Luis Alejandro. Instituto Universidad Escuela de Medicina del Hospital Italiano; ArgentinaFil: Lopez Ruiz, Águeda. No especifíca;Fil: Nassif, María Gabriela. Instituto Universidad Escuela de Medicina del Hospital Italiano; ArgentinaFil: Figari, Marcelo Fernando. Instituto Universidad Escuela de Medicina del Hospital Italiano; ArgentinaFil: Ritacco, Lucas. Consejo Nacional de Investigaciones Cientificas y Tecnicas. Oficina de Coordinacion Administrativa Houssay. Instituto de Medicina Traslacional E Ingenieria Biomedica. - Hospital Italiano. Instituto de Medicina Traslacional E Ingenieria Biomedica. - Instituto Universitario Hospital Italiano de Buenos Aires. Instituto de Medicina Traslacional E Ingenieria Biomedica.; Argentin

Prediction of 3-dimensional coverage surface area of the femoral head in hip dysplasia through conventional computed tomography

BACKGROUND: Assessment of 3-dimensional (3D) femoral head coverage is critical in evaluating, preoperative planning, and treating hip dysplasia. PURPOSE: To (1) propose a mathematical model to establish 3D femoral head coverage using conventional computed tomography (CT), (2) determine the correlation of 2D parameters with 3D coverage, and (3) characterize the patterns of dysplasia based on 3D morphology. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: We identified 30 patients (n = hips) with symptomatic dysplasia and 30 patients (n = hips) without dysplasia. Patients with dysplastic hips were matched with regard to sex, age, and body mass index to those with nondysplastic hips. Preoperative CTs were analyzed using 3D software, and 3D femoral head surface area coverage (FHSAC; in %) was assessed in 4 quadrant zones: anteromedial, anterolateral, posteromedial, and posterolateral. To assess lateral coverage of the femoral head, we introduced the anterolateral femoral head coverage angle (ALFC) and the posterolateral femoral head coverage angle (PLFC). RESULTS: Reduced femoral head coverage was more pronounced in dysplastic versus nondysplastic hips in the anterolateral quadrant (18% vs 40.7%, respectively) and posterolateral quadrant (35.8% vs 56.9%, respectively) ( CONCLUSION: The ALFC and The PLFC were strongly correlated with 3D lateral FHSAC and were able to predict 3D coverage accurately

Three-Dimensional Printing and Navigation in Bone Tumor Resection

One of the most promising advances raised by the current computer age is performing research “in silico,” which means computer-assisted. The objective of this chapter is firstly to evaluate if a 3D in-silico model of an oncological patient could be used to make a 3D-printed prototype in real scale, discriminating precisely healthy tissues, tumoral tissues and oncological margins. Secondly, the objective is to evaluate if this prototype could be representative enough to allow testing osteotomies under navigated guidance based on images. A tumor resection for a patient with diagnosed metaphyseal osteosarcoma of the proximal tibia was transferred into a rapid prototyping model, fabricated using 3D printing and representing different structures in different colors. The planned osteotomy was executed using Stryker Navigator to guide the cutting saw and the prototype was opened to verify the precision of the performed osteotomy. Both osteotomy planes showed successful correspondence with the safe margin, with a maximum error of 1 mm. The application of these techniques in general orthopedics would help to reduce the incidence of unforeseen intraoperative failures, contributing to obtain predictable surgical procedures. This would implement a new way of performing development, research and training in orthopedics and traumatology by in-silico technology

Postoperative assessment in computer assisted selection of femur osteoarticular allograft

El objetivo de nuestro trabajo fue comparar dos grupos de pacientes tratados con trasplantes osteoarticulares del fémur distal en términos de: 1) el volumen del fémur distal del receptor y del trasplante, 2) la superficie articular de contacto del fémur distal del receptor y del trasplante, 3) el ángulo del valgo anatómico femoral del fémur distal del receptor y del trasplante. Material y métodos: se realizó una búsqueda retrospectiva entre 2002 y 2012 analizando a pacientes tratados con un trasplante osteoarticular de fémur distal. Se incluyó un total de 32 pacientes. Estos fueron divididos en dos grupos de acuerdo con el método de selección del trasplante: Grupo 1, conformado por 16 pacientes con trasplantes seleccionados mediante 2D (tomografía) y Grupo 2, 16 pacientes con trasplantes seleccionados a través de un método 3D. La evaluación fue realizada por un observador independiente y ciego para los dos grupos. Resultados: las diferencias en las pruebas de estimación de volumen y superficie articulares entre el donante y el receptor no fueron estadísticamente significativas (p>0,05). Sin embargo, la diferencia entre los ángulos de valgo del fémur receptor y el fémur donante, seleccionados por el método 2D fue significativa (p0,05). Conclusión: el método de relación de un donante con un banco de huesos virtual luego de resección y reconstrucción con un aloinjerto osteoarticular permite obtener una mejor alineación particular que aquellos seleccionados solo con un método bidimensional.The aim of our study was to compare two groups of patients treated with distal femur osteoarticular allograft in terms of: 1) the volume of the distal femur of the allograft and patient, 2) the articular surface contact, 3) the anatomical femoral valgus angle. Material and methods: a retrospective review was performed between 2002 and 2012 and all patients with an osteo-articular allograft of the distal femur were analysed. A total of 32 patients were included in the study. Patients were divided into two groups according to the selection method of the allograft: Group 1, 16 patients with allograft selected by 2D (CT) and Group 2, 16 patients selected through a 3D method. The evaluation was done by an independent and blind observer. Results: the differences in terms of volume estimation and joint surface contact between the donor allograft and patient distal femur were not statistically significant (p>0.05). However, the difference between the valgus angle showed significant differences between donor and patient femurs selected by the 2D method (p0.05). Conclusion: the 3D method for allograft selection of the distal femur showed better results in limb alignment compared to 2D selection method.Fil: Milano, Federico Edgardo. Instituto Tecnológico de Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Albergo, José Ignacio. Hospital Italiano; ArgentinaFil: Farfalli, Germán Luis. Hospital Italiano; ArgentinaFil: Aponte Tinao, Luis Alberto. Hospital Italiano; ArgentinaFil: Ayerza, Miguel Angel. Hospital Italiano; ArgentinaFil: Muscolo, Domingo L.. Hospital Italiano; ArgentinaFil: Ritacco, Lucas Eduardo. Hospital Italiano; Argentin

Antenatal weight management: diet, physical activity, and gestational weight gain in early pregnancy

Objective: to investigate women’s physical activity levels, diet and gestational weight gain, and their experiences and motivations of behavior change. Design: analysis of cross-sectional data collected during a longitudinal, cohort study examining physiological, psychological, sociodemographic, and self-reported behavioural measures relating to bodyweight. Setting: women recruited from routine antenatal clinics at the Nottingham University Hospitals NHS Trust. Participants: 193 women ≤27 weeks gestation and aged 18 years or over. Measurements & findings: measurements included weight and height, the Dietary Instrument for Nutrition Education (Brief Version), the International Physical Activity Questionnaire (Short Form), and open questions of perceptions of behaviour change. 50.3% (n=97) were overweight/obese, and women gained 0.26kg/wk (IQR 0.34 kg/wk) since conception. The majority consumed low levels of fat (n=121; 63.4%), high levels of unsaturated fat (n=103; 53.9%), and used a dietary supplement (n=166; 86.5%). However, 41% (n=76) were inactive, 74.8% (n=143) did not consume high levels of fibre, and 90.0% (n=171) consumed less than 5 portions of fruit and vegetables a day. Body mass index category was not associated with diet, physical activity levels, or gestational weight gain. Themes generated from open-questions relating to behaviour change were: (1) Risk management, (2) Coping with symptoms, (3) Self-control, (4) Deviation from norm, (5) Nature knows best. Conclusions: early pregnancy is a period of significant and heterogeneous behaviour change, influenced by perceptions of risk and women’s lived experience. Behaviour was influenced not only by perceptions of immediate risk to the fetus, but also by the women’s lived experience of being pregnant. Implications for practice: There are exciting opportunities to constructively reframe health promotion advice relating to physical activity and diet in light of women’s priorities. The need for individualized advice is highlighted, and women across all body mass index categories would benefit from improved diet and physical activity levels

Antenatal weight management: diet, physical activity, and gestational weight gain in early pregnancy

Objective to investigate women's physical activity levels, diet and gestational weight gain, and their experiences and motivations of behavior change. Design analysis of cross-sectional data collected during a longitudinal, cohort study examining physiological, psychological, sociodemographic, and self-reported behavioural measures relating to bodyweight. Setting women recruited from routine antenatal clinics at the Nottingham University Hospitals NHS Trust. Participants 193 women ≤27 weeks gestation and aged 18 years or over. Measurements & findings measurements included weight and height, the Dietary Instrument for Nutrition Education (Brief Version), the International Physical Activity Questionnaire (Short Form), and open questions of perceptions of behaviour change. 50.3% (n=97) were overweight/obese, and women gained 0.26 kg/wk (IQR 0.34 kg/wk) since conception. The majority consumed low levels of fat (n=121; 63.4%), high levels of unsaturated fat (n=103; 53.9%), and used a dietary supplement (n=166; 86.5%). However, 41% (n=76) were inactive, 74.8% (n=143) did not consume high levels of fibre, and 90.0% (n=171) consumed less than 5 portions of fruit and vegetables a day. Body mass index category was not associated with diet, physical activity levels, or gestational weight gain. Themes generated from open-questions relating to behaviour change were: (1) Risk management, (2) Coping with symptoms, (3) Self-control, (4) Deviation from norm, (5) Nature knows best. Conclusions early pregnancy is a period of significant and heterogeneous behaviour change, influenced by perceptions of risk and women's lived experience. Behaviour was influenced not only by perceptions of immediate risk to the fetus, but also by the women's lived experience of being pregnant. Implications for practice: There are exciting opportunities to constructively reframe health promotion advice relating to physical activity and diet in light of women's priorities. The need for individualized advice is highlighted, and women across all body mass index categories would benefit from improved diet and physical activity levels