How Many Times Must the Question Be Answered? The Application of the Learned Intermediary Doctrine in the Norplant Contraceptive Products Liability Litigation

This Note begins with a general discussion of failure to warn causes of action and the application of the learned intermediary doctrine thereto. Further, Part II discusses cases essential to understanding the background of the Norplant Litigation. Next, Parts III and IV explain the facts and procedural history underlying the Norplant Litigation. Part V first examines the federal district court\u27s analysis of the case. It then discusses the Fifth Circuit\u27s analysis of the federal district court\u27s summary judgment ruling in AHP\u27s favor. Part VI examines the federal district court\u27s pivotal decision to apply the learned intermediary doctrine to the plaintiffs\u27 claims against AHP, and the Fifth Circuit\u27s decision to affirm this ruling, thereby effectively ending the litigation. Further, Part VI also notes that direct-to-consumer advertising creates a new and unprecedented issue in failure to warn product liability cases involving prescription drugs

How Many Times Must the Question Be Answered? The Application of the Learned Intermediary Doctrine in the Norplant Contraceptive Products Liability Litigation

This Note begins with a general discussion of failure to warn causes of action and the application of the learned intermediary doctrine thereto. Further, Part II discusses cases essential to understanding the background of the Norplant Litigation. Next, Parts III and IV explain the facts and procedural history underlying the Norplant Litigation. Part V first examines the federal district court\u27s analysis of the case. It then discusses the Fifth Circuit\u27s analysis of the federal district court\u27s summary judgment ruling in AHP\u27s favor. Part VI examines the federal district court\u27s pivotal decision to apply the learned intermediary doctrine to the plaintiffs\u27 claims against AHP, and the Fifth Circuit\u27s decision to affirm this ruling, thereby effectively ending the litigation. Further, Part VI also notes that direct-to-consumer advertising creates a new and unprecedented issue in failure to warn product liability cases involving prescription drugs

Analysis of Simulated and Experimental Noise Sources of Boeing 777 Main Gear Model via CLEAN in 3D

Previously obtained experimental and simulated phased microphone array data for the NASA 26%-scale model of a six-wheel main landing gear, with and without a toboggan-shaped noise reduction fairing, were analyzed using the CLEAN technique in three dimensions. The model is a high-fidelity representation of the Boeing 777-200 aircraft main landing gear. The reprocessing of the acoustic data was undertaken to address the deficiencies encountered in the source localization (beamform) maps and the integrated farfield spectra at mid to high frequencies in our previous study, where conventional array processing techniques were applied to the same data sets. Application of the CLEAN approach resulted in higher quality beamform maps with many of the previously observed side lobes either eliminated or suppressed significantly. As a result, integration of the experimentally and computationally based maps showed substantial improvement in the quality of the high-frequency spectral content relative to the corresponding spectra generated via conventional array processing, thus extending the good agreement achieved between the measured and predicted farfield spectra from 8 kHz to 14 kHz in model-scale frequencies. In addition, an examination of the simulated surface pressure fluctuations, off-surface flow field, and three-dimensionally constructed noise sources was conducted to determine the cause of the subtle discrepancies between measured and predicted sound pressure levels that occur in the 1,800 Hz to 4,000 Hz model-scale frequency range

Flight-Test Evaluation of Landing Gear Noise Reduction Technologies

Results from the third Acoustics Research Measurements flight test, conducted under the NASA Flight Demonstrations and Capabilities project, are presented and discussed. The test evaluated landing gear and gear cavity noise mitigation technologies installed on a NASA Gulfstream G-III. Aircraft configurations with and without main landing gear treatments were flown at several flap deflections to determine the acoustic performance of the technologies for aircraft equipped with conventional Fowler flaps. With the aircraft flying an approach path and engines at ground-idle, extensive acoustic measurements were acquired with a phased microphone array system. Computed beamform maps were used to examine the effectiveness of the tested technologies in reducing the strength of the noise sources generated by the main landing gear. Various integration regions were devised to extract the farfield noise spectra associated with the treated and untreated landing gear configurations. Analyses of the gathered acoustic data demonstrate that significant noise reduction was achieved. How- ever, the full noise reduction potential of the technologies could not be determined because of contamination from flap inboard edge noise and other secondary sources

Measured and Simulated Acoustic Signature of a Full-Scale Aircraft with Airframe Noise Reduction Technology Installed

Microphone phased-array and pole-mounted microphone data gathered during the NASA Acoustics Research Measurements flight tests were used to benchmark results from companion full-scale aeroacoustics simulations. Conducted with the lattice Boltzmann solver PowerFLOW, the simulations predicted the acoustic behavior of various tested aircraft configurations. Emphasis was placed on those flown during the third flight test - a Fowler flap-equipped Gulfstream G-III with and without noise abatement technology on the main landing gear. Direct comparisons between experimental and synthetic microphone phasedarray data were achieved by applying the same processing and deconvolution technique to both sets of data. To extend the validation of the computations to the metric used for noise certification, the Effective Perceived Noise Level, a high-fidelity digital model of the nose landing gear, which was excluded from earlier computations, was developed and integrated into the G-III aircraft geometry. The acoustic study presented here demonstrates that the simulated beamform maps and corresponding integrated farfield spectra accurately predict the locations and strengths of the prominent airframe noise sources present on the G-III aircraft

Assessment of Airframe Noise Reduction Technologies Based on EPNL from Flight Tests

The acoustic performance of various airframe noise reduction technologies Adaptive Compliant Trailing Edge flap, main landing gear fairings, and gear cavity treatments was determined, individually and in combination, using the Effective Perceived Noise Level metric. These noise measurements and calculations closely follow the Federal Aviation Administration aircraft noise certification standards, specifically for the approach noise measurement point. The flyover data correspond to pole-mounted, single-microphone measurements obtained during a series of flight tests, conducted under the NASA Flight Demonstrations and Capabilities project, that evaluated flap and landing gear noise reduction technologies. To minimize contributions from the propulsion system, the aircraft was flown along the approach path with engine thrust set at ground idle. Although contamination from engine, background, and secondary airframe noise sources partially masked the true performance of the tested technologies, the resulting acoustic data clearly showed substantial noise reductions relative to baseline levels. The acoustic benefits measured by the single microphones are consistent with previously reported trends in acoustic levels obtained from phased microphone array data

Patrones de reclutamiento en cuatro especies de Physaria (Brassicaceae): implicancias para el mantenimiento de la densidad en poblaciones silvestres y en cultivo

En zonas áridas, el reclutamiento de nuevos individuos es un proceso crítico que determina la viabilidad poblacional, el potencial de invasión de plantas alóctonas y el éxito en el establecimiento de cultivos. Se evaluaron las principales etapas del reclutamiento (lluvia de semillas, fecha de emergencia y supervivencia de las plántulas) en cuatro especies de Physaria (P. gracilis, P. angustifolia, P. pinetorum, y P. mendocina) en un experimento a campo en la Patagonia argentina, con el objetivo evaluar el potencial de este proceso para entender la dinámica poblacional y su utilidad como una alternativa sustentable de restablecimiento del cultivo. Se estudió el efecto de la disponibilidad de agua y de la densidad inicial de plántulas sobre la densidad final del cultivo. La cantidad total de semillas dispersadas fue mayor en P. gracilis y P. pinetorum que en las otras especies. No hubo germinación en P. mendocina. Las semillas de P. pinetorum germinaron a fines del verano, mientras que el resto de las especies germinó en primavera. La supervivencia estuvo modulada por un mecanismo denso-dependiente. En P. pinetorum, la densidad de plántulas fue estable en el tiempo en las parcelas de baja densidad inicial, mientras que decreció en las parcelas de densidades media y alta. A pesar de esto, la densidad final fue mayor en las parcelas de alta densidad inicial. La densidad final de P. gracilis respondió a la frecuencia de riego. Concluimos que la cantidad de semillas es adecuada para el restablecimiento de la población en las cuatro especies, aunque los procesos que resultan en la densidad final fueron dependientes de la especie. El control apropiado de la densidad inicial de plántulas jugaría un rol relevante para que el restablecimiento se produzca a densidades apropiadas para el cultivo en P. pinetorum.Seedling recruitment is a critical stage of a plant's cycle which determines population viability, the potential for invasiveness of a plant species and the success of establishment of a crop, among other processes. We evaluated the most relevant stages leading to recruitment (seed-rain, the time of seedling emergence, and seedling survival) in four species of Physaria (P. gracilis, P. angustifolia, Physaria pinetorum and P. mendocina) in a field experiment in Patagonia, Argentina, to assess the possibility of using spontaneous recruitment to understand population dynamics and to evaluate the potential of this process as a tool for crop reestablishment. We determined the effect of water availability and initial seedling density on final stand density. The total amount of dispersed seed was higher in P. gracilis and P. pinetorum than in the other two species. Physariapinetorum germinated in late summer, while P. angustifolia and P. gracilis germinatedin spring. No germination was registered for P. mendocina. In the three species whose seeds germinated, seedling survival was modulated by a density-dependent mechanism. For P. pinetorum seedling density was stable over time in low-density plots, while it decreased in high- and medium-density plots. Still, the highest final density was found in those plots with high initial density. Final density of P. gracilis also responded to irrigation treatment. The amount of dispersed seeds was adequate for the re-establishment of the crop in all four species, although the following stages were species-dependent. An appropriate control of seedling density at the initial stage of crop establishment may play a relevant role in the proper regeneration of the crop.Fil: González Paleo, Luciana. Museo Paleontológico Egidio Feruglio; Argentina. Universidad Nacional de la Patagonia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Pastor Pastor, Alejandro. Museo Paleontológico Egidio Feruglio; ArgentinaFil: Bar Lamas, Marlene Ivonne. Universidad Nacional de la Patagonia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Vilela, Alejandra Elena. Museo Paleontológico Egidio Feruglio; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Ravetta, Damián Andrés. Museo Paleontológico Egidio Feruglio; Argentina. Universidad Nacional de la Patagonia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

Progress and bottlenecks in the early domestication of the perennial oilseed Silphium integrifolium, a sunflower substitute

Silflower (Silphium integrifolium Michx.) is in the early stages of domestication as a perennial version of oilseed sunflower, its close relative. Grain crops with deep perennial root systems will provide farmers with new alternatives for managing soil moisture and limiting or remediating soil erosion, fertilizer leaching, and loss of soil biota. Several cycles of selection for increased seed production potential following initial germplasm evaluation in 2002 have provided opportunities to document the botany and ecology of this relatively obscure species, to compare agronomic practices for improving its propagation and management, and to evaluate the differences between semi-domesticated and wild accessions that have accrued over this time through intentional and unintentional genetic processes. Key findings include: domestication has increased aboveground biomass at seedling and adult stages; seed yield has increased more, achieving modest improvement in harvest index. Harvest index decreases with nitrogen fertilization. Silflower acquires nitrogen and water from greater depth than typical crops. In agricultural silflower stands within its native range, we found that Puccinia silphii (rust) and Eucosma giganteana (moth) populations build up to unacceptable levels, but we also found genetic variation for traits contributing to resistance or tolerance. Breeding or management for reduced height and vegetative plasticity should be top priorities for future silflower research outside its native range.Fil: Vilela, Alejandra Elena. Museo Paleontológico Egidio Feruglio; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: González Paleo, Luciana. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Museo Paleontológico Egidio Feruglio; ArgentinaFil: Turner, Kathryn. The Land Institute; Estados UnidosFil: Peterson, Kelsey. The Land Institute; Estados UnidosFil: Ravetta, Damián Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Museo Paleontológico Egidio Feruglio; ArgentinaFil: Crews, Timothy E.. The Land Institute; Estados UnidosFil: Van Tassel, David. The Land Institute; Estados Unido

A Comparative Study of Simulated and Measured Main Landing Gear Noise for Large Civil Transports

Computational results for the NASA 26%-scale model of a six-wheel main landing gear with and without a toboggan-shaped noise reduction fairing are presented. The model is a high-fidelity representation of a Boeing 777-200 aircraft main landing gear. A lattice Boltzmann method was used to simulate the unsteady flow around the model in isolation. The computations were conducted in free-air at a Mach number of 0.17, matching a recent acoustic test of the same gear model in the Virginia Tech Stability Wind Tunnel in its anechoic configuration. Results obtained on a set of grids with successively finer spatial resolution demonstrate the challenge in resolving/capturing the flow field for the smaller components of the gear and their associated interactions, and the resulting effects on the high-frequency segment of the farfield noise spectrum. Farfield noise spectra were computed based on an FWH integral approach, with simulated pressures on the model solid surfaces or flow-field data extracted on a set of permeable surfaces enclosing the model as input. Comparison of these spectra with microphone array measurements obtained in the tunnel indicated that, for the present complex gear model, the permeable surfaces provide a more accurate representation of farfield noise, suggesting that volumetric effects are not negligible. The present study also demonstrates that good agreement between simulated and measured farfield noise can be achieved if consistent post-processing is applied to both physical and synthetic pressure records at array microphone locations