Pont sobre la riera de La Bisbal del Penedès al terme municipal de Sant Salvador

El present Projecte té per objecte la definició, justificació i valoració de les obres per a la construcció d’un nou pont sobre la Riera de la Bisbal del Penedès, d’aquesta manera donem continuïtat a la carretera Cunit-Berà (avda. Palfuriana) en forts episodis de pluja. Per caracteritzar el comportament hidràulic d’avinguda, s'ha realitzat una simulació hidràulica per així conèixer les sobreelevacions, de la làmina d’aigua, provocades per el disseny del nostre pont que interfereix l’espai fluvial. A més, el projecte adapta les connexions necessàries amb el carrer Tamariu, el qual passa a ser un passeig de ribera que dona una certa continuïtat al passeig marítim de Sant Salvador

Cross-compatibility of the Parents as the Main Factor for Successful Olive Breeding Crosses

Previous analyses of olive (Olea europaea L.) crosses have revealed an important degree of pollen contamination. For this reason, the authors tested the paternity of a set of progenies coming from crosses among different cultivars within the olive breeding program of Cordoba, Spain, using four polymorphic microsatellites. They found that the expected pollen sired 141 (83.4%) of the 169 samples analyzed. The contamination rate was either almost total or almost null within each particular cross considered, not being comparable between different crosses. In a second experiment the authors evaluated the influence of several factors on the success of olive crosses, the type of isolation bag, the timing and number of pollinations, and the cross-compatibility of the parents in a multifactorial assay in 2003. They observed no differences in the type of pollination bag used or the number and timing of pollen additions when they analyzed 145 seeds. The main factor affecting the success of the crosses seems to be the intercompatibility among cultivars, because it had a significant influence on the rate of contamination. In the failed crosses, the authors clearly detected the contribution of more than one cultivar to the paternity. The results obtained here indicate that some knowledge of cross-compatibility relationships in olive is required to design crosses in olive breeding programs effectively. To achieve this objective, the progeny parentage analysis could be of great help because of the high level of pollen contamination found among those studied here

Diseño de un sistema SCADA para mejorar la gestión operativa en el área de mantenimiento de un terminal portuario.

Esta investigación tuvo como objetivo general diseñar un sistema SCADA para mejorar la gestión operativa en el área de mantenimiento de un terminal portuario. La investigación fue del tipo aplicada, Así mismo el diseño pre experimental con su variable independiente y la dependiente gestión operativa. Las técnicas de recolección de datos fueron la observación directa, entrevista y análisis documental, los instrumentos el Check list, hoja de registro y la guía de entrevista correspondientemente. En efecto, la gestión de resultados se encontró en 62.5%, grado de cumplimiento 60% y productividad 1.87; Todo esto con respecto a la gestión operativa en el área de mantenimiento eléctrico. Se concluyó que la gestión operativa mejoró con el sistema SCADA, el tiempo de respuesta ante anomalías eléctricas se redujo de 1.5 horas a 0.5 horas, se tiene datos de los parámetros eléctricos en tiempo real, así como el control del equipamiento como interruptores, módulos de transferencia automático, celdas de media tensión entre otros

The effects of remineralization via fluoride versus Low-Level Laser IR810 and fluoride agents on the mineralization and microhardness of bovine dental

Abstract: The objective of this study was to assess the mineralization and microhardness of bovine dental enamel surfaces treated with fluoride, tri-calcium phosphate, and infrared (IR) 810 laser irradiation. The study used 210 bovine incisors, which were divided into six groups (n = 35 in each): Group A: Untreated (control), Group B: Fluoride (Durapath-Colgate), Group C: Fluoride+Tri-calcium phosphate (Clin-Pro White-3 M), Group D: Laser IR 810 (Quantum), Group E: Fluoride+laser, and Group F: Fluoride+tri-calcium phosphate+laser). Mineralization was measured via UV-Vis spectroscopy for phosphorus and via atomic absorption spectroscopy for calcium upon demineralization and remineralization with proven agents. Microhardness (SMH) was measured after enamel remineralization. Mineral loss data showed differences between the groups before and after the mineralizing agents were placed (p < 0.05). Fluoride presented the highest remineralization tendency for both calcium and phosphate, with a Vickers microhardness of 329.8 HV0.1/11 (p < 0.05). It was observed that, if remineralization solution contained fewer minerals, the microhardness surface values were higher (r = −0.268 and −0.208; p < 0.05). This study shows that fluoride has a remineralizing effect compared with calcium triphosphate and laser IR810. This in vitro study imitated the application of different remineralizing agents and showed which one was the most efficient for treating non-cavitated injuries. This can prevent the progression of lesions in patients with white spot lesions

Passive mitigation of overheating in Finnish apartments under current and future climates

publishedVersionPeer reviewe

Towards a just heat transition in the building sector: A study on social indicators of sustainability

Heating in UK buildings is dominated by fossil fuels as the main energy source, representing over 80% of the household energy consumption and 79% of the carbon emissions. Therefore, heat decarbonisation in this sector should be accelerated in order to achieve the 2050 net zero carbon targets. However, there is still a great deal of uncertainty regarding the social impacts of heat decarbonisation strategies on households and the communities. The multiplicity of social criteria and inconsistency of their measuring methods complicate the assessment of social sustainability in the energy systems, leading to less incorporation of the social factors in design and decision-making processes. Therefore, identifying a set of indicators that represent the social performance of energy systems is an essential for conducting a holistic sustainability assessment. In this research, a methodological process is established primarily aimed to identify, select, and prioritise a representative set of indicators that can reflect the social sustainability of the heating transition in the building industry. The research accounts for a qualitative survey and judgments of experts to determine the indicators and their importance weights thus reducing the subjectivity and uncertainties of the process. The result is a social sustainability assessment framework that will enable decision-makers to evaluate the transition pathways, select the best alternatives, and monitor their performance, by analysing social indicators in conjunction with other sustainability parameters.publishedVersionPeer reviewe

Planning energy interventions in buildings and tackling fuel poverty : Can two birds be fed with one scone?

Energy retrofitting and renovations are an inseparable part of decarbonisation strategies in the building sector. These measures are often tied up with several social factors that can potentially impact the wellbeing of households and the community if the end-user requirements are not carefully considered. Fuel poverty is one of these social factors that is an essential consideration for designing effective, just, and user-centred interventions, but it is often overlooked in engineering processes. Therefore, this article seeks to re-connect the notion of fuel poverty to practice by bringing it forward from the post-intervention assessments to the design and decision-making stages. To do so, a new indicator, Potential Fuel Poverty Index (PFPI), is developed to obtain the likelihood of fuel poverty that future interventions can pose to the households. The PFPI presents a more targeted analysis of fuel poverty by reflecting the socio-spatial characterisation of the households. Using the PFPI, fuel poverty can be observed as a design/decision factor at the early stages of sketching interventions, in conjunction with other economic, environmental, and technical factors. Finally, the utility of the developed method is demonstrated using a real case study in the UK, assessing the impact of heat decarbonisation through heat pumps on fuel poverty.publishedVersionPeer reviewe

HPLC–Tandem Mass Spectrometric Method to Characterize Resveratrol Metabolism in Humans

AbstractBackground: Nutritional biomarkers are alternatives to traditional dietary assessment tools. We sought to develop a method for nutritional analysis of resveratrol, a phenolic compound with purported health-promoting properties, and to determine all resveratrol metabolites.Methods: We obtained LDL and urine samples from 11 healthy male volunteers who had consumed 250 mL of Merlot red wine. We measured resveratrol and its metabolites with 96-well solid-phase extraction plates coupled with HPLC-tandem mass spectrometry. Hexestrol was used as the internal standard. Gradient chromatography in multiple reaction monitoring mode was performed on a Luna C18 column, maintained at 40 °C; m/z transitions were as follows: resveratrol, 227/185; resveratrol glucosides, 389/227; resveratrol glucuronides, 403/227; resveratrol sulfates, 307/227; taxifolin, 303/285; and hexestrol, 269/134.Results: Standard calibration curves were linear at 4.4–3289.5 nmol/L. Residual analyses were 100% (3.2) for trans-resveratrol and 100% (11.1) for trans-piceid. In both matrices, imprecision (CV) was &lt;10.8% at all concentrations. Detection limits for resveratrol were 0.2 nmol/L (LDL), 0.3 nmol/L (synthetic urine), and 4.0 nmol/L (blank urine). Resveratrol and metabolites were checked for stability, and no degradation was observed.Conclusions: The HPLC–tandem mass spectrometry method enabled us to identify resveratrol sulfates in human LDL and to characterize the complete profile of resveratrol metabolism in human LDL and urine. This method provides an accurate index of exposure to resveratrol and its metabolites, which can be used as nutritional biomarkers for evaluating the biological effects of moderate wine intake on human health

Learning from fall-related interventions for older people at home : A scoping review

This scoping review aims to provide a better understanding about the fall-related interventions, and the conditions which stand out as effective in decreasing fall risks of older people at home. A total of 28 peer-reviewed papers were included when they reported interventions with an incidence of falls or fall-risk as a primary outcome for older people, focusing on the home environment, from 8 databases. Qualitative examination was complemented by quantitative risk ratio analysis where it was feasible. The interventions regarding incidence of falls had a mean risk rate of 0.75; moreover, interventions using multiple strategies were found relatively successful. The interventions regarding fall risk had a mean hazard rate of 0.66. A considerable number of no-effect ratios were evident. Combining education, home assessment or improvement, and use of technology with implementation by health service experts appears to be the most promising intervention strategy to reduce falls.Peer reviewe

Usefulness of a New Large Set of High Throughput EST-SNP Markers as a Tool for Olive Germplasm Collection Management

Germplasm collections are basic tools for conservation, characterization, and efficient use of olive genetic resources. The identification of the olive cultivars maintained in the collections is an important ongoing task which has been performed by both, morphological and molecular markers. In the present study, based on the sequencing results of previous genomic projects, a new set of 1,043 EST-SNP markers has been identified. In order to evaluate its discrimination capacity and utility in diversity studies, this set of markers was used in a representative number of accessions from 20 different olive growing countries and maintained at the World Olive Germplasm Collection of IFAPA Centre ‘Alameda del Obispo’ (Córdoba, Spain), one of the world’s largest olive germplasm bank. Thus, the cultivated material included: cultivars belonging to previously defined core collections by means of SSR markers and agronomical traits, well known homonymy cases, possible redundancies previously identified in the collection, and recently introduced accessions. Marker stability was tested in repeated analyses of a selected number of accessions, as well as in different trees and accessions belonging to the same cultivar. In addition, 15 genotypes from a cross ‘Picual’ × ‘Arbequina’ cultivars from the IFAPA olive breeding program and a set of 89 wild genotypes were also included in the study. Our results indicate that, despite their relatively wide variability, the new set of EST-SNPs displayed lower levels of genetic diversity than SSRs in the set of olive core collections tested. However, the EST-SNP markers displayed consistent and reliable results from different plant material sources and plant propagation events. The EST-SNPs revealed a clear cut off between inter- and intra-cultivar variation in olive. Besides, they were able to reliably discriminate among different accessions, to detect possible homonymy cases as well as efficiently ascertain the presence of redundant germplasm in the collection. Additionally, these markers were highly transferable to the wild genotypes. These results, together with the low genotyping error rates and the easy and fully automated procedure used to get the genotyping data, validate the new set of EST-SNPs as possible markers of choice for olive cultivar identification