Scientific results of the Bryotrop expedition to Zaire and Rwanda : 3., photosynthetic gas exchange of bryophytes from different forest types in eastern Central Africa.

During the BRYOTROP-Expedition to Zaire and Rwanda bryophytes were collected from a rainforest habitat at 800 m a.s.l. and from bamboo forest and tree-heath environments between 2200 and 3200 m. The microclimates influencing the mosses are different at the altitudinally separated locations. Conditions are rather constant with 24 °C, 100 % rel. hum. and PAR below 100 μmol photons m-2 sec-1 at the lowland station, rather versatile in the mountains with six times higher daily sums of PAR, temperatures between 10 and 25 °C and relative humidities between 60 and 1oo %. In the bamboo forest epiphytic mosses dry out during the day to less than 70 % of their water content, but regain saturation from the vapor-saturated air during night. Bryophyte photosynthesis and respiration were studied by Warburg manometry with moisture saturated samples. Temperature curves of gas exchange peaked between 22 and 30 °C. Optima of the lowland species were somewhat higher than those from samples collected at the mountain sites. Habitat separation of characteristics of photosynthesis was more pronounced with respect to light responses. Saturation gas exchange rates were reached by all species still below 400 μmol photons m-2 sec-1. But the slopes of the curves in the low-light range were distinctly steeper, and the light compensation points smaller in the lowland than in the highland species (compensation points of the former: 3 - 12 μmol photons m-2 sec-1, of the latter: 8 - 20 μmol photons m-2 sec-1). It is emphasized that bryophytes in the rainforest understory experience extremely high ambient C02 concentrations near the floor. This, their low light requirements for photosynthesis, and the permanently optimal temperature and humidity conditions for maximal carbon gain enable them to live successfully, but with less biomass development in this dark and damp environment. By contrast, bryophytes from the bamboo forest and tree-heath environments can utilize light conditions combined with variable temperatures and humidities similarly as species from extratropical vegetation types

НАУКОВІ ДОСЛІДЖЕННЯ ВЧЕНИХ КВГУ-КГІ-ДГІ В ГАЛУЗІ МЕТАЛУРГІЇ (1900-1930 рр.)

Перші зародки промислового вуглевидобутку на Півдні Російської імперії (Лисячий Байрак під Лисичанськом) і виробництва металу (м. Луганськ) виник-ли у 90-х роках ХVІІІ с. У наступні десятиліття ці взаємопов’язані галузі розвивалися дуже повільно. А трохи раніше спроба почати видобуток залізної руди і виплавку з неї гарматних ядер на Криворіжжі була невдалою, тому майже на сто років про ці поклади руд забули

Dimethyl ether in its ground state, v=0, and lowest two torsionally excited states, v11=1 and v15=1, in the high-mass star-forming region G327.3-0.6

The goal of this paper is to determine the respective importance of solid state vs. gas phase reactions for the formation of dimethyl ether. This is done by a detailed analysis of the excitation properties of the ground state and the torsionally excited states, v11=1 and v15=1, toward the high-mass star-forming region G327.3-0.6. With the Atacama Pathfinder EXperiment 12 m submillimeter telescope, we performed a spectral line survey. The observed spectrum is modeled assuming local thermal equilibrium. CH3OCH3 has been detected in the ground state, and in the torsionally excited states v11=1 and v15=1, for which lines have been detected here for the first time. The emission is modeled with an isothermal source structure as well as with a non-uniform spherical structure. For non-uniform source models one abundance jump for dimethyl ether is sufficient to fit the emission, but two components are needed for the isothermal models. This suggests that dimethyl ether is present in an extended region of the envelope and traces a non-uniform density and temperature structure. Both types of models furthermore suggest that most dimethyl ether is present in gas that is warmer than 100 K, but a smaller fraction of 5%-28% is present at temperatures between 70 and 100 K. The dimethyl ether present in this cooler gas is likely formed in the solid state, while gas phase formation probably is dominant above 100 K. Finally, the v11=1 and v15=1 torsionally excited states are easily excited under the density and temperature conditions in G327.3-0.6 and will thus very likely be detectable in other hot cores as well.Comment: 12 pages (excluding appendices), 8 figures, A&A in pres

Combined TRPC3 and TRPC6 blockade by selective small-molecule or genetic deletion inhibits pathological cardiac hypertrophy

Chronic neurohormonal and mechanical stresses are central fea-tures of heart disease. Increasing evidence supports a role forthe transient receptor potential canonical channels TRPC3 andTRPC6 in this pathophysiology. Channel expression for both is nor-mally very low but is increased by cardiac disease, and geneticgain- or loss-of-function studies support contributions to hypertro-phy and dysfunction. Selective small-molecule inhibitors remainscarce, and none target both channels, which may be useful giventhe high homology among them and evidence of redundant sig-naling. Here we tested selective TRPC3/6 antagonists (GSK2332255Band GSK2833503A; IC50,3–21 nM against TRPC3 and TRPC6) andfound dose-dependent blockade of cell hypertrophy signaling trig-gered by angiotensin II or endothelin-1 in HEK293T cells as well as inneonatal and adult cardiac myocytes. In vivo efficacy in mice andrats was greatly limited by rapid metabolism and high protein bind-ing, although antifibrotic effects with pressure overload were ob-served. Intriguingly, although gene deletion of TRPC3 or TRPC6alone did not protect against hypertrophy or dysfunction frompressure overload, combined deletion was protective, support-ing the value of dual inhibition. Further development of thispharmaceutical class may yield a useful therapeutic agent forheart disease management.Fil: Seo, Kinya. Johns Hopkins Medical Institutions. Department of Medicine; Estados UnidosFil: Rainer, Peter P.. Johns Hopkins Medical Institutions. Department of Medicine; Estados Unidos. Medical University of Graz. Department of Medicine; AustriaFil: Shalkey Hahn, Virginia. Johns Hopkins Medical Institutions. Department of Medicine; Estados UnidosFil: Lee, Dong-ik. Johns Hopkins Medical Institutions. Department of Medicine; Estados UnidosFil: Jo, Su-Hyun. Kangwon National University School of Medicine; Corea del Sur. Johns Hopkins Medical Institutions. Department of Medicine; Estados UnidosFil: Andersen, Asger. Aarhus University Hospital. Department of Cardiology; DinamarcaFil: Liu, Ting. Johns Hopkins Medical Institutions. Department of Medicine; Estados UnidosFil: Xu, Xiaoping. GlaxoSmithKline Heart Failure Discovery Performance Unit; Estados UnidosFil: Willette, Robert N.. GlaxoSmithKline Heart Failure Discovery Performance Unit; Estados UnidosFil: Lepore, John J.. GlaxoSmithKline Heart Failure Discovery Performance Unit; Estados UnidosFil: Marino, Joseph P.. GlaxoSmithKline Heart Failure Discovery Performance Unit; Estados UnidosFil: Birnbaumer, Lutz. ational Institute of Environmental Health Sciences; Estados Unidos. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Investigaciones Biomédicas. Universidad de Buenos Aires. Facultad de Medicina. Instituto de Investigaciones Biomédicas; ArgentinaFil: Schnackenberg, Christine G.. GlaxoSmithKline Heart Failure Discovery Performance Unit; Estados UnidosFil: Kass, David A.. Johns Hopkins Medical Institutions. Department of Medicine; Estados Unido

Nitrogen fixation rates in the Guinea Dome and the equatorial upwelling regions in the Atlantic Ocean

Biological nitrogen fixation is a key process balancing the loss of combined nitrogen in the marine nitrogen cycle. Its relevance in upwelling or high nutrient regions is still unclear, with the few available studies in these regions of the ocean reporting rates that vary widely from below detection limit to > 100 nmol N L−1 d−1. In the eastern tropical Atlantic Ocean, two open ocean upwelling systems are active in boreal summer. One is the seasonal equatorial upwelling, where the residual phosphorus associated with aged upwelled waters is suggested to enhance nitrogen fixation in this season. The other is the Guinea Dome, a thermal upwelling dome. We conducted two surveys along 23° W across the Guinea Dome and the Equator from 15° N to 5° S in September 2015 and August–September 2016 with high latitudinal resolution (20–60 nm between stations). The abundance of Trichodesmium colonies was characterized by an Underwater Vision Profiler 5 and the total biological nitrogen fixation in the euphotic layer was measured using the 15N2 technique. The highest abundances of Trichodesmium colonies were found in the area of the Guinea Dome (9°–15° N) with a maximum of 3 colonies L−1 near the surface. By contrast, colonies were almost absent in the Equatorial band between 2° N and 5° S. The highest nitrogen fixation rate was measured at the northern edge of the Guinea Dome in 2016 (ca. 31 nmol N L−1 d−1). In this region, where diazotrophs thrived on a sufficient supply of both phosphorus and iron, a patchy distribution was unveiled by our increased spatial resolution scheme. In the Equatorial band, rates were considerably lower, ranging from below detection limit to ca. 4 nmol N L−1 d−1, with a clear difference in magnitude between 2015 (rates close to zero) and 2016 (average rates around 2 nmol N L−1 d−1). This difference seemed triggered by a contrasting supply of phosphorus between years. Our study stresses the importance of surveys with sampling at fine-scale spatial resolution, and shows unexpected high variability in the rates of nitrogen fixation in the Guinea Dome, a region where diazotrophy is a significant process supplying new nitrogen into the euphotic layer.publishedVersio

Analytical solutions of jam pattern formation on a ring for a class of optimal velocity traffic models

A follow-the-leader model of traffic flow on a closed loop is considered in the framework of the extended optimal velocity (OV) model where the driver reacts to both the following and the preceding car. Periodic wave train solutions that describe the formation of traffic congestion patterns are found analytically. Their velocity and amplitude are determined from a perturbation approach based on collective coordinates with the discrete modified Korteweg-de Vries equation as the zero order equation. This contains the standard OV model as a special case. The analytical results are in excellent agreement with numerical solutions

Searching for hexagonal analogues of the half-metallic half-Heusler XYZ compounds

The XYZ half-Heusler crystal structure can conveniently be described as a tetrahedral zinc blende YZ structure which is stuffed by a slightly ionic X species. This description is well suited to understand the electronic structure of semiconducting 8-electron compounds such as LiAlSi (formulated Li$^+$[AlSi]$^-$) or semiconducting 18-electron compounds such as TiCoSb (formulated Ti$^{4+}$[CoSb]$^{4-}$). The basis for this is that [AlSi]$^-$ (with the same electron count as Si$_2$) and [CoSb]$^{4-}$ (the same electron count as GaSb), are both structurally and electronically, zinc-blende semiconductors. The electronic structure of half-metallic ferromagnets in this structure type can then be described as semiconductors with stuffing magnetic ions which have a local moment: For example, 22 electron MnNiSb can be written Mn$^{3+}$[NiSb]$^{3-}$. The tendency in the 18 electron compound for a semiconducting gap -- believed to arise from strong covalency -- is carried over in MnNiSb to a tendency for a gap in one spin direction. Here we similarly propose the systematic examination of 18-electron hexagonal compounds for semiconducting gaps; these would be the "stuffed wurtzite" analogues of the "stuffed zinc blende" half-Heusler compounds. These semiconductors could then serve as the basis for possibly new families of half-metallic compounds, attained through appropriate replacement of non-magnetic ions by magnetic ones. These semiconductors and semimetals with tunable charge carrier concentrations could also be interesting in the context of magnetoresistive and thermoelectric materials.Comment: 11 pages, 6 figures, of which 4 are colou

Integrated additive design and manufacturing approach for the bioengineering of bone scaffolds for favorable mechanical and biological properties

Additive manufacturing (AM) presents the possibility of personalized bone scaffolds with unprecedented structural and functional designs. In contrast to earlier conventional design concepts, e.g. raster-angle, a workflow was established to produce scaffolds with triply periodic minimal surface (TPMS) architecture. A core challenge is the realization of such structures using melt-extrusion based 3D printing. This study presents methods for generation of scaffold design files, finite element (FE) analysis of scaffold Young's moduli, AM of scaffolds with polycaprolactone (PCL), and a customized in vitro assay to evaluate cell migration. The reliability of FE analysis when using computer-aided designed models as input may be impeded by anomalies introduced during 3D printing. Using micro-computed tomography reconstructions of printed scaffolds as an input for numerical simulation in comparison to experimentally obtained scaffold Young's moduli showed a moderate trend (R 2 = 0.62). Interestingly, in a preliminary cell migration assay, adipose-derived mesenchymal stromal cells (AdMSC) migrated furthest on PCL scaffolds with Diamond, followed by Gyroid and Schwarz P architectures. A similar trend, but with an accelerated AdMSC migration rate, was observed for PCL scaffolds surface coated with calcium-phosphate-based apatite. We elaborate on the importance of start-to-finish integration of all steps of AM, i.e. design, engineering and manufacturing. Using such a workflow, specific biological and mechanical functionality, e.g. improved regeneration via enhanced cell migration and higher structural integrity, may be realized for scaffolds intended as temporary guiding structures for endogenous tissue regeneration

In matrix derivatization combined with LC-MS/MS results in ultra-sensitive quantification of plasma free metanephrines and catecholamines

Plasma-free metanephrines and catecholamines are essential markers in the biochemical diagnosis and follow-up of neuroendocrine tumors and inborn errors of metabolism. However, their low circulating concentrations (in the nanomolar range) and poor fragmentation characteristics hinder facile simultaneous quantification by liquid chromatography and tandem mass spectrometry (LC-MS/MS). Here, we present a sensitive and simple matrix derivatization procedure using propionic anhydride that enables simultaneous quantification of unconjugated l-DOPA, catecholamines, and metanephrines in plasma by LC-MS/MS. Dilution of propionic anhydride 1:4 (v/v) in acetonitrile in combination with 50 μL of plasma resulted in the highest mass spectrometric response. In plasma, derivatization resulted in stable derivatives and increased sensitivity by a factor of 4-30 compared with a previous LC-MS/MS method for measuring plasma metanephrines in our laboratory. Furthermore, propionylation increased specificity, especially for 3-methoxytyramine, by preventing interference from antihypertensive medication (β-blockers). The method was validated according to international guidelines and correlated with a hydrophilic interaction LC-MS/MS method for measuring plasma metanephrines (R2 > 0.99) and high-performance liquid chromatography with an electrochemical detection method for measuring plasma catecholamines (R2 > 0.85). Reference intervals for l-DOPA, catecholamines, and metanephrines in n = 115 healthy individuals were established. Our work shows that analytes in the subnanomolar range in plasma can be derivatized in situ without any preceding sample extraction. The developed method shows improved sensitivity and selectivity over existing methods and enables simultaneous quantification of several classes of amines

Intermediate Mass Black Hole Formation in compact Young Massive Star Clusters

Young dense massive star clusters are a promising environment for the formation of intermediate mass black holes (IMBHs) through collisions. We present a set of 80 simulations carried out with Nbody6++GPU of 10 initial conditions for compact $\sim 7 \times 10^4 M_{\odot}$ star clusters with half-mass radii $R_\mathrm{h} \lesssim 1 pc$, central densities $\rho_\mathrm{core} \gtrsim 10^5 M_\odot pc^{-3}$, and resolved stellar populations with 10\% primordial binaries. Very massive stars (VMSs) with masses up to $\sim 400 M_\odot$ grow rapidly by binary exchange and three-body scattering events with main sequences stars in hard binaries. Assuming that in VMS - stellar BH collisions all stellar material is accreted onto the BH, IMBHs with masses up to $M_\mathrm{BH} \sim 350 M_\odot$ can form on timescales of $\lesssim 15$ Myr. This process was qualitatively predicted from Monte Carlo MOCCA simulations. Despite the stochastic nature of the process - typically not more than 3/8 cluster realisations show IMBH formation - we find indications for higher formation efficiencies in more compact clusters. Assuming a lower accretion fraction of 0.5 for VMS - BH collisions, IMBHs can also form. The process might not work for accretion fractions as low as 0.1. After formation, the IMBHs can experience occasional mergers with stellar mass BHs in intermediate mass-ratio inspiral events (IMRIs) on a 100 Myr timescale. Realised with more than $10^5$ stars, 10 \% binaries, the assumed stellar evolution model with all relevant evolution processes included and 300 Myr simulation time, our large suite of simulations indicates that IMBHs of several hundred solar masses might form rapidly in massive star clusters right after their birth while they are still compact.Comment: Submitte