A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding

The final publication is available at Springer via http://dx.doi.org/10.1007/s12289-015-1225-zThis paper addresses the numerical simulation of void formation and transport during mold filling in Resin Transfer Molding (RTM). The saturation equation, based on a two-phase flow model resin/air, is coupled with Darcy s law and mass conservation to simulate the unsaturated filling flow that takes place in a RTM mold when resin is injected through the fiber bed. These equations lead to a system composed of an advection diffusion equation for saturation including capillary effects and an elliptic equation for pressure taking into account the effect of air residual saturation. The model introduces the relative permeability as a function of resin saturation. When capillary effects are omitted, the hyperbolic nature of the saturation equation and its strong coupling with Darcy equation through relative permeability represent a challenging numerical issue. The combination of the constitutive physical laws relating permeability to saturation with the coupled system of the pressure and saturation equations allows predicting the saturation profiles. The model was validated by comparison with experimental data obtained for a fiberglass reinforcement injected in a RTM mold at constant flow rate. The saturation measured as a function of time during the resin impregnation of the fiber bed compared very well with numerical predictions.The authors acknowledge financial support of the Spanish Government (Projects DPI2010-20333 and DPI2013-44903-R-AR), of the National Science and Research Council of Canada (NSERC) and of the Canada Reseach Chair (CRC) program.Gascón Martínez, ML.; García Manrique, JA.; Lebel, F.; Ruiz, E.; Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming. 9(2):229-239. doi:10.1007/s12289-015-1225-zS22923992Patel N, Lee LJ (1996) Modeling of void formation and removal in liquid composite molding. Part I: wettability analysis. Polym Compos 17(1):96–103Ruiz E, Achim V, Soukane S, Trochu F, Bréard J (2006) Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites. Compos Sci Technol 66(3–4):475–486Trochu F, Ruiz E, Achim V, Soukane S (2006) Advanced numerical simulation of liquid composite molding for process analysis and optimization. Compos A: Appl Sci Manuf 37(6):890–902Park CH, Lee W (2011) Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review. J Reinf Plast Compos 30(11):957–977Pillai KM (2004) Modeling the unsaturated flow in liquid composite molding processes: a review and some thoughts. J Compos Mater 38(23):2097–2118Breard J, Saouab A, Bouquet G (2003) Numerical simulation of void formation in LCM. Compos A: Appl Sci Manuf 34:517–523Breard J, Henzel Y, Trochu F, Gauvin R (2003) Analysis of dynamic flows through porous media. Part I: comparison between saturated and unsaturated flows in fibrous reinforcements. Polym Compos 24(3):391–408Parnas RS, Phelan FR Jr (1991) The effect of heterogeneous porous media on mold filling in Resin Transfer Molding. SAMPE Q 22(2):53–60Parseval DY, Pillai KM, Advani SG (1997) A simple model for the variation of permeability due to partial saturation in dual scale porous media. Transp Porous Media 27(3):243–264Pillai KM (2002) Governing equations for unsaturated flow through woven fiber mats. Part 1. Isothermal flows. Compos A: Appl Sci Manuf 33(7):1007–1019Simacek P, Advani SG (2003) A numerical model to predict fiber tow saturation during Liquid Composite Molding. Compos Sci Technol 63:1725–1736García JA, Gascón L, Chinesta F (2010) A flux limiter strategy for solving the saturation equation in RTM process simulation. Compos A: Appl Sci Manuf 41:78–82Chui WK, Glimm J, Tangerman FM, Jardine AP, Madsen JS, Donnellan TM, Leek R (1997) Process modeling in Resin Transfer Molding as a method to enhance product quality. SIAM Rev 39(4):714–727Nordlund M, Michaud V (2012) Dynamic saturation curve measurement for resin flow in glass fibre reinforcement. Compos A: Appl Sci Manuf 43:333–343García JA, Ll G, Chinesta F (2003) A fixed mesh numerical method for modelling the flow in liquid composites moulding processes using a volume of fluid technique. Comput Methods Appl Mech Eng 192(7–8):877–893García JA, Ll G, Chinesta F, Trochu F, Ruiz E (2010) An efficient solver of the saturation equation in liquid composite molding processes. Int J Mater Form 3(2):1295–1302Lebel F (2012) Contrôle de la fabrication des composites par injection sur renforts. École Polytechnique de Montréal, CanadaVan Genuchten MT (1980) Closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Sci Soc Am J 44(5):892–898Buckley SE, Leverett MC (1942) Mechanism of fluid displacement in sands. Pet Trans AWME 146:107–116Lundstrom TS, Gebart BR (1994) Influence from process parameters on void formation in Resin Transfer Molding. Polym Compos 15(1):25–33Lundstrom TS (1997) Measurement of void collapse during Resin Transfer Molding. Compos A: Appl Sci Manuf 28(3):201–214Lundstrom TS, Frishfelds V, Jakovics A (2010) Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry. Compos A: Appl Sci Manuf 41:83–92Lebel F, Fanaei A, Ruiz E, Trochu F (2012) Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open J Inorg Non-Metallic Mater 2(3):25–45Brooks RH, Corey AT (1964) Hydraulic properties of porous media. Colorado State University. Hydrology Papers 1–37Corey AT (1954) The interrelation between gas and oil relative permeabilities. Prod Monthly 19(1):38–4

The HELLP syndrome: Clinical issues and management. A Review

<p>Abstract</p> <p>Background</p> <p>The HELLP syndrome is a serious complication in pregnancy characterized by haemolysis, elevated liver enzymes and low platelet count occurring in 0.5 to 0.9% of all pregnancies and in 10–20% of cases with severe preeclampsia. The present review highlights occurrence, diagnosis, complications, surveillance, corticosteroid treatment, mode of delivery and risk of recurrence.</p> <p>Methods</p> <p>Clinical reports and reviews published between 2000 and 2008 were screened using Pub Med and Cochrane databases.</p> <p>Results and conclusion</p> <p>About 70% of the cases develop before delivery, the majority between the 27th and 37th gestational weeks; the remainder within 48 hours after delivery. The HELLP syndrome may be complete or incomplete. In the Tennessee Classification System diagnostic criteria for HELLP are haemolysis with increased LDH (> 600 U/L), AST (≥ 70 U/L), and platelets < 100·10⁹/L. The Mississippi Triple-class HELLP System further classifies the disorder by the nadir platelet counts. The syndrome is a progressive condition and serious complications are frequent. Conservative treatment (≥ 48 hours) is controversial but may be considered in selected cases < 34 weeks' gestation. Delivery is indicated if the HELLP syndrome occurs after the 34th gestational week or the foetal and/or maternal conditions deteriorate. Vaginal delivery is preferable. If the cervix is unfavourable, it is reasonable to induce cervical ripening and then labour. In gestational ages between 24 and 34 weeks most authors prefer a single course of corticosteroid therapy for foetal lung maturation, either 2 doses of 12 mg betamethasone 24 hours apart or 6 mg or dexamethasone 12 hours apart before delivery. Standard corticosteroid treatment is, however, of uncertain clinical value in the maternal HELLP syndrome. High-dose treatment and repeated doses should be avoided for fear of long-term adverse effects on the foetal brain. Before 34 weeks' gestation, delivery should be performed if the maternal condition worsens or signs of intrauterine foetal distress occur. Blood pressure should be kept below 155/105 mmHg. Close surveillance of the mother should be continued for at least 48 hours after delivery.</p

Analysis of the human monocyte-derived macrophage transcriptome and response to lipopolysaccharide provides new insights into genetic aetiology of inflammatory bowel disease

The FANTOM5 consortium utilised cap analysis of gene expression (CAGE) to provide an unprecedented insight into transcriptional regulation in human cells and tissues. In the current study, we have used CAGE-based transcriptional profiling on an extended dense time course of the response of human monocyte-derived macrophages grown in macrophage colony-stimulating factor (CSF1) to bacterial lipopolysaccharide (LPS). We propose that this system provides a model for the differentiation and adaptation of monocytes entering the intestinal lamina propria. The response to LPS is shown to be a cascade of successive waves of transient gene expression extending over at least 48 hours, with hundreds of positive and negative regulatory loops. Promoter analysis using motif activity response analysis (MARA) identified some of the transcription factors likely to be responsible for the temporal profile of transcriptional activation. Each LPS-inducible locus was associated with multiple inducible enhancers, and in each case, transient eRNA transcription at multiple sites detected by CAGE preceded the appearance of promoter-associated transcripts. LPS-inducible long non-coding RNAs were commonly associated with clusters of inducible enhancers. We used these data to re-examine the hundreds of loci associated with susceptibility to inflammatory bowel disease (IBD) in genome-wide association studies. Loci associated with IBD were strongly and specifically (relative to rheumatoid arthritis and unrelated traits) enriched for promoters that were regulated in monocyte differentiation or activation. Amongst previously-identified IBD susceptibility loci, the vast majority contained at least one promoter that was regulated in CSF1-dependent monocyte-macrophage transitions and/or in response to LPS. On this basis, we concluded that IBD loci are strongly-enriched for monocyte-specific genes, and identified at least 134 additional candidate genes associated with IBD susceptibility from reanalysis of published GWA studies. We propose that dysregulation of monocyte adaptation to the environment of the gastrointestinal mucosa is the key process leading to inflammatory bowel disease

Using textile topography to analyze X-ray CT data of composite microstructure

The 3-dimensional yam architecture in a 2-dimensional woven fabric reinforced composite is nonuniform. Many structural features appear that are not obvious from consideration only of the yarn architecture in the single layer textile fabric. A complete set of 3-dimensional image data was acquired for a representative volume of the composite using X-ray micro-computed tomography. Extensive image analysis was, however, necessary to reveal the yarn architecture due to relatively low signal-to-noise ratio and contrast levels relative to optical microscopy of polished cross sections.status: publishe

The fractal dimension of X-ray tomographic sections of a woven composite

Plain woven E-glass fibre-reinforced epoxy resin composites have been imaged using X-ray computed tomography. A data-set of 150 cross-sectional slices have been quantified using fractal dimensions. For this data set, the fractal dimension analysis returns a consistent numerical value for each of the slices in the two similar orthogonal planes.status: publishe

Pore network modeling of permeability for textile reinforcements

The homogenized permeability of textile reinforcement is computed using pore network modeling. The model takes as input a 3D image of the reinforcement, reduced to an array of points, each of them having a binary value designating whether the point lies inside a yarn or in a pore. The array can be acquired by X-ray micro-computerized tomography. The calculations Proceed in two steps. First, the 3D image is analyzed to create a representation of the pores in the reinforcement by a system of interconnected pipes. Each pipe is characterized by its hydraulic resistance. Then the hydraulic resistance of the system of pipes is computed using the Kirchoff theory to yield a value for homogenized permeability of the reinforcement. The model is applied to a glass woven laminate, producing results in good agreement. with experimentally measured values.status: publishe