Small-angle scattering behavior of thread-like and film-like systems

A film-like or a thread-like system is a system such that one of its constituting homogeneous phases has a constant thickness $\delta$ or a constant normal section of largest diameter $\delta$. The stick probability function of this phase, in the limit $\delta \to 0$, naturally leads to the definition of the correlation function (CF) of a surface or a curve. This CF fairly approximates the generating stick probability function in the range of distances larger than $\delta$. The surface and the curve CFs respectively behave as $1/r$ and $1/r^2$ as $r \to 0$. In the two cases, this result implies that small-angle scattering intensities of the relevant samples respectively behave as $1/q^2$ and $1/q$ in an intermediate range of the scattering vector $q$ and as $1/q^4$ in the outermost one. One reports the analytic expressions of the pre-factors of these behaviors. It may happen that a sample looks thread-like at large scale resolution and film-like at smaller one. The surface and the curve CFs have explicitly been evaluated for some simple geometrical shapes. Besides, it is also reported the algebraic expression of the circular cylinder CF in terms of two elliptic integral functions, and it is shown that the limits of this CF, as the height or the radius of the cylinder approaches to zero, coincide with the CF of a disk or a linear segment, respectively.Comment: 37 pages, 18 figure

Correction: Unexpected optical activity of cerium in Y2O3:Ce3+, Yb3+, Er3+ up and down-conversion system

Correction for 'Unexpected optical activity of cerium in Y2O3:Ce3+, Yb3+, Er3+ up and down-conversion system' by Riccardo Marin et al., Dalton Trans., 2013, 42, 16837–16845

Synthesis and Antimicrobial Evaluation of Bis-morpholine Triazine Quaternary Ammonium Salts

Efficient, environmentally and economically sustainable, and nontoxic antibacterial products are of global relevance in the fight against microorganism contamination. In this work, an easy and straightforward method for the synthesis of bis-morpholino triazine quaternary ammonium salts (bis-mTQAS) is reported, starting from 2,4,6-trichloro-1,3,5-triazine or 2,4-dichloro-6-methoxy-1,3,5-triazine and various N-alkylmorpholines. Bis-mTQAS were tested as antimicrobials against Gram-negative and Gram-positive bacterial strains. The best-performing bis-mTQAS were found to achieve total disinfection against Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 at 50 and 400 μg/mL, respectively. Distinctively, bis-mTQAS with the highest antimicrobial efficiency had lowest cytotoxicity. © 2021 The Authors. ChemMedChem published by Wiley-VCH Gmb

Ag-sensitized Tb3+/Yb3+ codoped silica-zirconia glasses and glass-ceramics: Systematic and detailed investigation of the broadband energy-transfer and downconversion processes

Abstract Various studies report that Tb3+/Yb3+ co-doped materials can split one UV or 488 nm (visible) photon in two near infrared (NIR) photons at 980 nm by an energy-transfer process involving one Tb3+ and two Yb3+ ions. Additionally, it was demonstrated that Ag multimers can provide an efficient optical sensitizing effect for rare earth ions (RE3+ ions), resulting in a broadband enhanced excitation, which could have a significant technological impact, overcoming their limited spectral absorptions and small excitation cross sections. However, a systematic and detailed investigation of the down-conversion process enhanced by Ag nanoaggregates is still lacking, which is the focus of this paper. Specifically, a step by step analysis of the energy-transfer quantum-cutting chain in Ag-exchanged Tb3+/Yb3+ co-doped glasses and glass-ceramics is presented. Moreover, the direct Ag-Yb3+ energy-transfer is also considered. Results of structural, compositional, and optical characterizations are given, providing quantitative data for the efficient broadband Ag-sensitization of Tb3+/Yb3+ quantum cutting. A deeper understanding of the physical processes beneath the optical properties of the developed materials will allow a wiser realization of more efficient energy-related devices, such as spectral converters for silicon solar cells and light-emitting devices (LEDs) in the visible and NIR spectral regions

Towards a rational design of a continuous-flow method for the acetalization of crude glycerol: scope and limitations of commercial Amberlyst 36 and AlF3·3H2O as model catalysts

The acetalization of six different types of glycerol including pure, wet, and crude-like grade compounds of compositions simulating those of crude glycerols produced by the biodiesel manufacture, was carried out with two model ketones such as acetone and 2-butanone. The reaction was investigated under continuous-flow (CF) conditions through a comparative analysis of an already known acetalization catalyst such as Amberlyst 36 (A36), and aluminum fluoride three hydrate (AlF3 center dot 3H(2)O, AF) whose use was never previously reported for the synthesis of acetals. At 10 bar and 25 degrees C, A36 was a highly active catalyst allowing good-to-excellent conversion (85%-97%) and selectivity (99%) when either pure or wet glycerol was used as a reagent. This catalyst however, proved unsuitable for the CF acetalization of crude-like glycerol (CG) since it severely and irreversibly deactivated in a few hours by the presence of low amounts of NaCl (2.5 wt %) which is a typical inorganic impurity of raw glycerol from the biorefinery. Higher temperature and pressure (up to 100 degrees C and 30 bar) were not successful to improve the outcome. By contrast, at 10 bar and 100 degrees C, AF catalyzed the acetalization of CG with both acetone and 2-butanone, yielding stable conversion and productivity up to 78% and 5.6 h(-1), respectively. A XRD analysis of fresh and used catalysts proved that the active phase was a solid solution (SS) of formula Al-2[F1-x(OH)(x)](6)(H2O)(y) present as a component of the investigated commercial AF sample. A hypothesis to explain the role of such SS phase was then formulated based on the Bronsted acidity of OH groups of the solid framework. Overall, the AF catalyst allowed not only a straightforward upgrading of CG to acetals, but also a more cost-efficient protocol avoiding the expensive refining of raw glycerol itself

Shape fidelity and sterility assessment of 3D printed polycaprolactone and hydroxyapatite scaffolds

AbstractPolycaprolactone (PCL) and hydroxyapatite (HA) composite are widely used in tissue engineering (TE). They are fit to being processed with three-dimensional (3D) printing technique to create scaffolds with verifiable porosity. The current challenge is to guarantee the reliability and reproducibility of 3D printed scaffolds and to create sterile scaffolds which can be used for in vitro cell cultures. In this context it is important for successful cell culture, to have a protocol in order to evaluate the sterility of the printed scaffolds. We proposed a systematic approach to sterilise 90%PCL-10%HA pellets using a 3D bioprinter before starting the printing process. We evaluated the printability of PCL-HA composite and the shape fidelity of scaffolds printed with and without sterilised pellets varying infill pattern, and the sterility of 3D printed scaffolds following the method established by the United States Pharmacopoeia. Finally, the thermal analyses supported by the Fourier Transform Infrared Spectroscopy were useful to verify the stability of the sterilisation process in the PCL solid state with and without HA. The results show that the use of the 3D printer, according to the proposed protocol, allows to obtain sterile 3D PCL-HA scaffolds suitable for TE applications such as bone or cartilage repair

Ag-Sensitized Yb3+ Emission in Glass-Ceramics

Rare earth doped materials play a very important role in the development of many photonic devices, such as optical amplifiers and lasers, frequency converters, solar concentrators, up to quantum information storage devices. Among the rare earth ions, ytterbium is certainly one of the most frequently investigated and employed. The absorption and emission properties of Yb3+ ions are related to transitions between the two energy levels 2F7/2 (ground state) and 2F5/2 (excited state), involving photon energies around 1.26 eV (980 nm). Therefore, Yb3+ cannot directly absorb UV or visible light, and it is often used in combination with other rare earth ions like Pr3+, Tm3+, and Tb3+, which act as energy transfer centres. Nevertheless, even in those co-doped materials, the absorption bandwidth can be limited, and the cross section is small. In this paper, we report a broadband and efficient energy transfer process between Ag dimers/multimers and Yb3+ ions, which results in a strong PL emission around 980 nm under UV light excitation. Silica-zirconia (70% SiO2-30% ZrO2) glass-ceramic films doped by 4 mol.% Yb3+ ions and an additional 5 mol.% of Na2O were prepared by sol-gel synthesis followed by a thermal annealing at 1000 °C. Ag introduction was then obtained by ion-exchange in a molten salt bath and the samples were subsequently annealed in air at 430 °C to induce the migration and aggregation of the metal. The structural, compositional, and optical properties were investigated, providing evidence for efficient broadband sensitization of the rare earth ions by energy transfer from Ag dimers/multimers, which could have important applications in different fields, such as PV solar cells and light-emitting near-infrared (NIR) devices

New perspectives in cardiovascular risk reduction: focus on HDL

Cardiovascular diseases represent the leading cause of morbidity and mortality worldwide, mostly contributing to hospitalizations and health care costs. Dyslipidemias represent one of the major cardiovascular risk factor and its management, throughout life-style modifications and pharmacological interventions, has shown to reduce cardiac events. The risk of adverse cardiovascular events is related not only to elevated LDL blood levels, but also to decreased HDL concentrations, that exhibit protective effects in the development of atherosclerotic process. Aim of this review is to summarize current evidences about defensing effects of such lipoproteins and to show the most recent pharmacological strategies to reduce cardiovascular risk through the increase of their circulating levels

Coexistence of plasmonic and magnetic properties in Au89Fe11 nanoalloys

We describe an environmentally friendly, top-down approach to the synthesis of Au89Fe11 nanoparticles (NPs). The plasmonic response of the gold moiety and the magnetism of the iron moiety coexist in the Au89Fe11 nanoalloy with strong modification compared to single element NPs, revealing a non-linear surface plasmon resonance dependence on the iron fraction and a transition from paramagnetic to a spin-glass state at low temperature. These nanoalloys are accessible to conjugation with thiolated molecules and they are promising contrast agents for magnetic resonance imaging