Comparing badger (Meles meles) management strategies for reducing tuberculosis incidence in cattle

This is the final version of the article. Available from Public Library of Science via the DOI in this record.Bovine tuberculosis (bTB), caused by Mycobacterium bovis, continues to be a serious economic problem for the British cattle industry. The Eurasian badger (Meles meles) is partly responsible for maintenance of the disease and its transmission to cattle. Previous attempts to manage the disease by culling badgers have been hampered by social perturbation, which in some situations is associated with increases in the cattle herd incidence of bTB. Following the licensing of an injectable vaccine, we consider the relative merits of management strategies to reduce bTB in badgers, and thereby reduce cattle herd incidence. We used an established simulation model of the badger-cattle-TB system and investigated four proposed strategies: business as usual with no badger management, large-scale proactive badger culling, badger vaccination, and culling with a ring of vaccination around it. For ease of comparison with empirical data, model treatments were applied over 150 km(2) and were evaluated over the whole of a 300 km(2) area, comprising the core treatment area and a ring of approximately 2 km. The effects of treatment were evaluated over a 10-year period comprising treatment for five years and the subsequent five year period without treatment. Against a background of existing disease control measures, where 144 cattle herd incidents might be expected over 10 years, badger culling prevented 26 cattle herd incidents while vaccination prevented 16. Culling in the core 150 km(2) plus vaccination in a ring around it prevented about 40 cattle herd breakdowns by partly mitigating the negative effects of culling, although this approach clearly required greater effort. While model outcomes were robust to uncertainty in parameter estimates, the outcomes of culling were sensitive to low rates of land access for culling, low culling efficacy, and the early cessation of a culling strategy, all of which were likely to lead to an overall increase in cattle disease.Funding: The UK Department for Environment, Food and Rural Affairs (Defra, http://ww2.defra.gov.uk/) funded this work. Defra designed the three strategies to investigate, but had no role in data collection and analysis, decision to publish, or preparation of the manuscript

Electrohydrodynamic and Aerosol Jet Printing for the Copatterning of Polydimethylsiloxane and Graphene Platelet Inks

The performance of soft sensing and actuation devices is dependent on their design, the electro‐mechanical response of materials, and the ability to copattern structural and functional features. For film based soft structures, such as wearable sensors and artificial muscles, manufacturing challenges exist that prevent the translation of technology from laboratory to practical application. In this work, a hybrid manufacturing technique is presented that integrates electro‐hydrodynamic and aerosol jet deposition to print multilayer, multimaterial structures. The combined approach overcomes the respective rheological constraints of the individual processes, while presenting a pathway to higher resolution computer‐controlled patterning. Electro‐hydrodynamic deposition of a polydimethylsiloxane elastomer is demonstrated and characterized, before being combined with aerosol jet deposition of a graphene platelet ink to produce functional devices. A proof‐of‐concept, multilayer capacitive sensor is presented as a first demonstration of the manufacturing technology

Re-Os dating of pyrite confirms an early diagenetic onset and extended duration of mineralization in the Irish Zn-Pb ore field

0000-0002-7706-6003The Irish Midlands region contains one of the world’s largest hydrothermal Zn-Pb ore districts, but uncertainty exists in the timing of mineralization relative to host rock ages. Consequently, genetic models for ore formation are poorly constrained and remain controversial. Here we use Re-Os geochronology to show that ore-stage pyrite from the Lisheen deposit formed at 346.6 ± 3.0 Ma, shortly after host rock deposition. Pyrite from the Silvermines deposit returns an age of 334.0 ± 6.1 Ma, indicating that at least some mineralization occurred during later burial. These age determinations show that the much younger paleomagnetic ages reported for the Irish Zn-Pb deposits reflect remagnetization during the Variscan orogeny, a process that we suggest affects paleomagnetic dating more widely. The Re-Os ages overlap with the ages of lower Carboniferous volcanic rocks in the Midlands, which are the product of magmatism that has been invoked as the driving force for hydrothermal activity. The relatively low initial Os ratios for both Lisheen (0.253 ± 0.045) and Silvermines (0.453 ± 0.006) are compatible with derivation of Os from these magmas, or from the Caledonian basement that underlies the ore deposits.This journal is published under the terms of Green Open Access. Authors may post a copy of the accepted (i.e., post-peer review) version of their paper (https://doi.org/10.1130/G36296.1) in a repository of their choice or to their personal website after the relevant embargo period has passed. The embargo period will be 12 months from formal online publication

Lead optimisation of dehydroemetine for repositioned use in malaria

Drug repositioning offers an effective alternative to de novo drug design to tackle the urgent need for novel anti-malarial treatments. The anti-amoebic compound, emetine dihydrochloride, has been identified as a potent in-vitro inhibitor of the multi-drug resistant strain K1 of Plasmodium falciparum (IC50: 47 nM ± 2.1 nM). Dehydroemetine, a synthetic analogue of emetine dihydrochloride has been reported to have less cardiotoxic effects than emetine. The structures of two diastereomers of dehydroemetine were modelled on the published emetine binding site on cryo-EM structure 3J7A (Pf 80S ribosome in complex with emetine) and it was found that (-)-R,S-dehydroemetine mimicked the bound pose of emetine more closely than (-)-S,S-dehydroisoemetine. (-)-R,S-dehydroemetine (IC50 71.03 ± 6.1 nM) was also found to be highly potent against the multi-drug resistant K1 strain of P. falciparum in comparison with (-)-S,S-dehydroisoemetine (IC50 2.07 ± 0.26 μM), which loses its potency due to the change of configuration at C-1′. In addition to its effect on the asexual erythrocytic stages of P. falciparum, the compounds exhibited gametocidal properties with no cross-resistance against any of the multi-drug resistant strains tested. Drug interaction studies showed (-)-R,S-dehydroemetine to have synergistic antimalarial activity with atovaquone and proguanil. Emetine dihydrochloride, and (-)-R,S-dehydroemetine failed to show any inhibition of the hERG potassium channel and displayed activity on the mitochondrial membrane potential indicating a possible multi-modal mechanism of action. [Abstract copyright: Copyright © 2020 Panwar et al.

ACE inhibitor and angiotensin receptor-II antagonist prescribing and hospital admissions with acute kidney injury: A longitudinal ecological study

This is the final version. Available from the publisher via the DOI in this record.Background: ACE Inhibitors (ACE-I) and Angiotensin-Receptor Antagonists (ARAs) are commonly prescribed but can cause acute kidney injury (AKI) during intercurrent illness. Rates of hospitalization with AKI are increasing. We aimed to determine whether hospital AKI admission rates are associated with increased ACE-I/ARA prescribing. Methods and Findings: English NHS prescribing data for ACE-I/ARA prescriptions were matched at the level of the general practice to numbers of hospital admissions with a primary diagnosis of AKI. Numbers of prescriptions were weighted for the demographic characteristics of general practices by expressing prescribing as rates where the denominator is Age, Sex, and Temporary Resident Originated Prescribing Units (ASTRO-PUs). We performed a mixed-effect Poisson regression to model the number of admissions for AKI occurring in each practice for each of 4 years from 1/4/2007. From 2007/8-2010/11, crude AKI admission rates increased from 0.38 to 0.57 per 1000 patients (51.6% increase), and national annual ACE-I/ARA prescribing rates increased by 0.032 from 0.202 to 0.234 (15.8% increase). There was strong evidence (p<0.001) that increases in practice-level prescribing of ACE-I/ARA over the study period were associated with an increase in AKI admission rates. The increase in prescribing seen in a typical practice corresponded to an increase in admissions of approximately 5.1% (rate ratio = 1.051 for a 0.03 per ASTRO-PU increase in annual prescribing rate, 95%CI 1.047-1.055). Using the regression model we predict that 1,636 (95%CI 1,540-1,780) AKI admissions would have been avoided if prescribing rates were at the 2007/8 level, equivalent to 14.8% of the total increase in AKI admissions. Conclusion: In this ecological analysis, up to 15% of the increase in AKI admissions in England over a 4-year time period is potentially attributable to increased prescribing of ACE-I and ARAs. However, these findings are limited by the lack of patient level data such as indication for prescribing and patient characteristics. © 2013 Tomlinson et al.Cambridge Biomedical Research InstituteBritish Heart Foundatio

The accuracy of diagnostic coding for acute kidney injury in England - A single centre study

This is the final version. Available on open access from BMC via the DOI in this recordBackground: Acute kidney injury (AKI) is an independent risk factor for mortality and is responsible for a significant burden of healthcare expenditure, so accurate measurement of its incidence is important. Administrative coding data has been used for assessing AKI incidence, and shows an increasing proportion of hospital bed days attributable to AKI. However, the accuracy of coding for AKI and changes in coding over time have not been studied in England. Methods. We studied a random sample of admissions from 2005 and 2010 where ICD-10 code N17 (acute renal failure) was recorded in the administrative coding data at one acute NHS Foundation Trust in England. Using the medical notes and computerised records we examined the demographic and clinical details of these admissions. Results: Against a 6.3% (95% CI 4.8-7.9%) increase in all non-elective admissions, we found a 64% increase in acute renal failure admissions (95% CI 41%-92%, p<0.001) in 2010 compared to 2005. Median age was 78 years (IQR 72-87), 11-25% had a relevant pre-admission co-morbidity and 64% (55-73%) were taking drugs known to be associated with AKI. Over both years, 95% (91-99%) of cases examined met the Kidney Disease: Improving Global Outcomes criteria for AKI. Conclusions: Patients with hospital admissions where AKI has been coded are elderly with multiple co-morbidities. Our results demonstrate a high positive predictive value of coding data for a clinical diagnosis of AKI, with no suggestion of marked changes in coding of AKI between 2005 and 2010. © 2013 Tomlinson et al; licensee BioMed Central Ltd.Cambridge Biomedical Research InstituteBritish Heart Foundatio

A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturing

Aerosol Jet Printing (AJP) is an emerging contactless direct write approach aimed at the production of fine features on a wide range of substrates. Originally developed for the manufacture of electronic circuitry, the technology has been explored for a range of applications, including, active and passive electronic components, actuators, sensors, as well as a variety of selective chemical and biological responses. Freeform deposition, coupled with a relatively large stand-off distance, is enabling researchers to produce devices with increased geometric complexity compared to conventional manufacturing or more commonly used direct write approaches. Wide material compatibility, high resolution and independence of orientation have provided novelty in a number of applications when AJP is conducted as a digitally driven approach for integrated manufacture. This overview of the technology will summarise the underlying principles of AJP, review applications of the technology and discuss the hurdles to more widespread industry adoption. Finally, this paper will hypothesise where gains may be realised through this assistive manufacturing process

Isolation and characterization of renin-like aspartic-proteases from Echis ocellatus venom

Three aspartic proteases (SVAPs) have been isolated from venom of the saw-scaled viper, Echis ocellatus. In confirmation of prior transcriptomic predictions, all three forms match to sequences of either of the two SVAP transcripts (EOC00051 and EOC00123), have a molecular weight of 42 kDa and possess a single N-glycan. The SVAPs act in a renin-like manner, specifically cleaving human and porcine angiotensinogen into angiotensin-1 and possess no general protease activity. Their activity is completely inhibited by the aspartyl protease inhibitor Pepstatin A

Addition to "Nanostars carrying multifunctional neurotrophic dendrimers protect neurons in preclinical in vitro models of neurodegenerative disorders".

In the original version of this article (p. 47457), some acknowledgments were not included. In the revised Acknowledgments section provided below, we additionally provide The REC reference for the ethical approval of the human astrocyte isolation, an acknowledgment to Dr. Alize Proust at the Francis Crick Institute for establishing the triple coculture BBB model used in this study, and the reference and the grant number for the source of the human fetal material. This does not affect the results or conclusions of our work

Non-overshooting stabilisation via state and output feedback

The concept of “strong stability” of LTI systems has been introduced in a recent paper [KHP2]. This is a stronger notion of stability compared to alternative definitions (e.g. stability in the sense of Lyapunov, asymptotic stability), which allows the analysis and design of control systems with non-overshooting response in the state-space for arbitrary initial conditions. The paper reviews the notion of “strong stability” [KHP2] and introduces the problem of non-overshooting stabilization. It is shown that non-overshooting stabilization under dynamic and static output feedback are, in a certain sense, equivalent problems. Thus, we turn our attention to static non-overshooting stabilization problems under state-feedback, output injection and output feedback. After developing a number of preliminary results, we give a geometric interpretation to the problem in terms of the intersection of an affine hyperplane and the interior of an open convex cone. A solution to the problem is finally obtained via Linear Matrix Inequalities, along with the complete parametrization of the optimal solution set