96 research outputs found
Estimation of Fecundity and Gonadosomatic Index of Terapon jarbua from Pondicherry Coast, India
In the present study fecundity of Terapon jarbua was estimated for 41 matured females from the Bay of Bengal, Pondicherry. The fecundity (F) was found to range from 13,475 to 115,920 in fishes between 173-278mm Total length (TL) and 65- 298 gm weight respectively. The co-efficient of correlation for F/TL (log F = - 4.821 + 4.146 log TL), F/SL (log F = -3.936 + 3.867 log SL), F/WF (log F = 1.229 + 0.730 log TW) and F/GW (log F = 0.724 + 1.113 log GW) were obtained as 0.474, 0.537, 0.641 and 0.908 respectively. The regression line for the TL, SL, WF and GW of the fishes were found to be linear when they were plotted against their fecundity on logarithmic scales. Highly significant (P<0.01) relationship was obtained for all the variables. Hence Total Length, Standard Length, Weight of Fish and Gonad Weight were found to be the best indicators of the fecundity of Terapon jarbua. Gonadosomatic indices of Terapon jarbua showed that the spawning took place in February to July. The overall sex ratio of male to female is 1.28:1 with chi-square value 5.719, significant at 5% level
Recommended from our members
Analytical treatments of micro-channel and micro-capillary flows
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Extensive work in the field of micro-channel and micro-capillary flows using the extended Navier-Stokes equations are carried out in this paper by taking the diffusive mass transport into account and provided the basis for analytical treatments of these flows. The results are compared with experimental results for micro-channels and showed good agreement. It is found that a characteristic pressure is useful to explain the comparisons. In addition, the work on micro-channel flows is extended to micro-capillary flows, to provide analytical treatments of this class of flows. The analytical results show similar behavior to that of micro-channel flows. Comparisons between the analytical results and experimental findings are also presented and discussed by introducing the characteristic pressure
Recommended from our members
Treatments of flows through micro-channels based on the Extended Navier-Stokes-Equations
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.The paper briefly refers to the present treatments of micro-channel flows that are based on the existing Navier-Stokes-Equations and the employment of wall-slip boundary conditions. The Maxwell slip velocity is employed for this purpose. This theoretical treatment is questioned. It is shown by the authors that the existing Navier-Stokes-Equations are incomplete. They do not contain terms for the self diffusion of mass. Introducing these terms yields the extended Navier-Stokes-Equations that allow micro-channel flows to be treated without the assumption of Maxwellian slip velocities at the wall. A pressure driven slip velocity occurs at the wall and it results as part of the solution for flows in micro-channels by the “Extended Navier-Stokes Equations”. Using these equations, analytical treatments of micro-channel flows are presented. Good agreement with existing experimental results is obtained
Discovery of FNDR-20123, a histone deacetylase inhibitor for the treatment of Plasmodium falciparum malaria
BACKGROUND: Emergence of anti-malarial drug resistance and perpetual increase in malaria incidence necessitates the development of novel anti-malarials. Histone deacetylases (HDAC) has been shown to be a promising target for malaria, despite this, there are no HDAC inhibitors in clinical trials for malaria treatment. This can be attributed to the poor pharmacokinetics, bioavailability and selectivity of the HDAC inhibitors. METHODS: A collection of HDAC inhibitors were screened for anti-malarial activity, and the best candidate was profiled in parasite-killing kinetics, growth inhibition of sensitive and multi-drug resistant (MDR) strains and against gametocytes. Absorption, distribution, metabolism and excretion pharmacokinetics (ADME-PK) parameters of FNDR-20123 were determined, and in vivo efficacy was studied in a mouse model for Plasmodium falciparum infection. RESULTS: A compound library of HDAC inhibitors (180 in number) was screened for anti-malarial activity, of which FNDR-20123 was the most potent candidate. The compound had been shown to inhibit Plasmodium HDAC with IC50 of 31 nM and human HDAC with IC50 of 3 nM. The IC50 obtained for P. falciparum in asexual blood-stage assay was 42 nM. When compared to atovaquone and pyrimethamine, the killing profiles of FNDR-20123 were better than atovaquone and comparable to pyrimethamine. The IC50 values for the growth inhibition of sensitive and MDR strains were similar, indicating that there is no cross-resistance and a low risk of resistance development. The selected compound was also active against gametocytes, indicating a potential for transmission control: IC50 values being 190 nM for male and > 5 microM for female gametocytes. FNDR-20123 is a stable candidate in human/mouse/rat liver microsomes (> 75% remaining post 2-h incubation), exhibits low plasma protein binding (57% in humans) with no human Ether-a-go-go-Related Gene (hERG) liability (> 100 microM), and does not inhibit any of the cytochrome P450 (CYP) isoforms tested (IC50 > 25 microM). It also shows negligible cytotoxicity to HepG-2 and THP-1 cell lines. The oral pharmacokinetics in rats at 100 mg/kg body weight shows good exposures (Cmax = 1.1 microM) and half-life (T1/2 = 5.5 h). Furthermore, a 14-day toxicokinetic study at 100 mg/kg daily dose did not show any abnormality in body weight or gross organ pathology. FNDR-20123 is also able to reduce parasitaemia significantly in a mouse model for P. falciparum infection when dosed orally and subcutaneously. CONCLUSION: FNDR-20123 may be a suitable candidate for the treatment of malaria, which can be further developed
Hepatoprotective potential of Azima tetracantha and Tribulus terrestris on ferrous sulfate-induced toxicity in rat
The present study is to evaluate the antihepatotoxic effect of hydroalcoholic extract of leaf powder of Azima tetracantha and the fruit powder of Tribulus terrestris. Ferrous sulfate was used to induce hepatotoxicity and Silymarin was used as a standard drug. The level of biochemical parameters such as protein, albumin, globulin, HDL, vitamin E, superoxide dismutase and catalase were observed to be decreased and the level of glucose, LDL, VLDL, bilirubin, cholesterol, triglycerides, alkaline phosphatase and TBARS were increased in hepatotoxicity-induced rats. Retrieval of liver parameters to normal level was obtained after the oral administration of herbal drugs. Histopathological studies revealed diminished hepatocellular injury in the herbal drugs treated rats. As a conclusion hydro alcoholic extract of leaf powder of A. tetracantha and fruit powder of T. terrestris were possesses significant hepatoprotective activity
Recasting Navier–Stokes equations
Classical Navier-Stokes equations fail to describe some flows in both the
compressible and incompressible configurations. In this article, we propose a
new methodology based on transforming the fluid mass velocity vector field to
obtain a new class of continuum models. We uncover a class of continuum models
which we call the re-casted Navier-Stokes. They naturally exhibit the physics
of previously proposed models by different authors to substitute the original
Navier-Stokes equations. The new models unlike the conventional Navier-Stokes
appear as more complete forms of mass diffusion type continuum flow equations.
They also form systematically a class of thermo-mechanically consistent
hydrodynamic equations via the original equations. The plane wave analysis is
performed to check their linear stability under small perturbations, which
confirms that all re-casted models are spatially and temporally stable like
their classical counterpart. We then use the Rayleigh-Brillouin scattering
experiments to demonstrate that the re-casted equations may be better suited
for explaining some of the experimental data where original Navier-Stokes fail
Intense violet–blue emission and paramagnetism of nanocrystalline Gd3+ doped ZnO ceramics
Nanocrystalline Zn1-xGdxO (x = 0, 0.02, 0.04, 0.06, and 0.08) ceramics were synthesized by ball milling and subsequent solid-state reaction. The transmission electron microscopy (TEM) micrograph of as synthesized samples revealed the formation of crystallites with an average diameter of 60 nm, and the selected area electron diffraction (SAED) pattern confirmed the formation of wurtzite structure. A red shift in the band gap was observed with increasing Gd3+ concentration. The photoluminescence of nanocrystalline Gd3+ doped ZnO exhibited a strong violet–blue emission. Concentration dependence of the emission intensity of Gd3+ in ZnO was studied, and the critical concentration was found to be 4 mol% of Gd3+. The Gd3+ doped ZnO exhibited paramagnetic behavior at room temperature, and the magnetic moment increased with Gd3+ concentration
Consequences of a telomerase-related fitness defect and chromosome substitution technology in yeast synIX strains
We describe the complete synthesis, assembly, debugging, and characterization of a synthetic 404,963 bp chromosome, synIX (synthetic chromosome IX). Combined chromosome construction methods were used to synthesize and integrate its left arm (synIXL) into a strain containing previously described synIXR. We identified and resolved a bug affecting expression of EST3, a crucial gene for telomerase function, producing a synIX strain with near wild-type fitness. To facilitate future synthetic chromosome consolidation and increase flexibility of chromosome transfer between distinct strains, we combined chromoduction, a method to transfer a whole chromosome between two strains, with conditional centromere destabilization to substitute a chromosome of interest for its native counterpart. Both steps of this chromosome substitution method were efficient. We observed that wild-type II tended to co-transfer with synIX and was co-destabilized with wild-type IX, suggesting a potential gene dosage compensation relationship between these chromosomes. </p
Resistance gene cloning from a wild crop relative by sequence capture and association genetics
Disease resistance (R) genes from wild relatives could be used to engineer broad-spectrum resistance in domesticated crops. We combined association genetics with R gene enrichment sequencing (AgRenSeq) to exploit pan-genome variation in wild diploid wheat and rapidly clone four stem rust resistance genes. AgRenSeq enables R gene cloning in any crop that has a diverse germplasm panel
- …