6,282 research outputs found

    Photoelectron microscopy and quantum yields of membrane phospholipids

    Get PDF
    2 page

    Atmospheric greenhouse gases retrieved from SCIAMACHY: comparison to ground-based FTS measurements and model results

    Get PDF
    SCIAMACHY onboard ENVISAT (launched in 2002) enables the retrieval of global long-term column-averaged dry air mole fractions of the two most important anthropogenic greenhouse gases carbon dioxide and methane (denoted XCO_2 and XCH_4). In order to assess the quality of the greenhouse gas data obtained with the recently introduced v2 of the scientific retrieval algorithm WFM-DOAS, we present validations with ground-based Fourier Transform Spectrometer (FTS) measurements and comparisons with model results at eight Total Carbon Column Observing Network (TCCON) sites providing realistic error estimates of the satellite data. Such validation is a prerequisite to assess the suitability of data sets for their use in inverse modelling. It is shown that there are generally no significant differences between the carbon dioxide annual increases of SCIAMACHY and the assimilation system CarbonTracker (2.00 ± 0.16 ppm yr^(−1) compared to 1.94 ± 0.03 ppm yr−1 on global average). The XCO_2 seasonal cycle amplitudes derived from SCIAMACHY are typically larger than those from TCCON which are in turn larger than those from CarbonTracker. The absolute values of the northern hemispheric TCCON seasonal cycle amplitudes are closer to SCIAMACHY than to CarbonTracker and the corresponding differences are not significant when compared with SCIAMACHY, whereas they can be significant for a subset of the analysed TCCON sites when compared with CarbonTracker. At Darwin we find discrepancies of the seasonal cycle derived from SCIAMACHY compared to the other data sets which can probably be ascribed to occurrences of undetected thin clouds. Based on the comparison with the reference data, we conclude that the carbon dioxide data set can be characterised by a regional relative precision (mean standard deviation of the differences) of about 2.2 ppm and a relative accuracy (standard deviation of the mean differences) of 1.1–1.2 ppm for monthly average composites within a radius of 500 km. For methane, prior to November 2005, the regional relative precision amounts to 12 ppb and the relative accuracy is about 3 ppb for monthly composite averages within the same radius. The loss of some spectral detector pixels results in a degradation of performance thereafter in the spectral range currently used for the methane column retrieval. This leads to larger scatter and lower XCH_4 values are retrieved in the tropics for the subsequent time period degrading the relative accuracy. As a result, the overall relative precision is estimated to be 17 ppb and the relative accuracy is in the range of about 10–20 ppb for monthly averages within a radius of 500 km. The derived estimates show that the SCIAMACHY XCH_4 data set before November 2005 is suitable for regional source/sink determination and regional-scale flux uncertainty reduction via inverse modelling worldwide. In addition, the XCO2 monthly data potentially provide valuable information in continental regions, where there is sparse sampling by surface flask measurements

    Interacting damage models mapped onto Ising and percolation models

    Full text link
    We introduce a class of damage models on regular lattices with isotropic interactions, as e.g. quasistatic fiber bundles. The system starts intact with a surface-energy threshold required to break any cell sampled from an uncorrelated quenched-disorder distribution. The evolution of this heterogeneous system is ruled by Griffith's principle which states that a cell breaks when the release in elastic energy in the system exceeds the surface-energy barrier necessary to break the cell. By direct integration over all possible realizations of the quenched disorder, we obtain the probability distribution of each damage configuration at any level of the imposed external deformation. We demonstrate an isomorphism between the distributions so obtained and standard generalized Ising models, in which the coupling constants and effective temperature in the Ising model are functions of the nature of the quenched-disorder distribution and the extent of accumulated damage. In particular, we show that damage models with global load sharing are isomorphic to standard percolation theory, that damage models with local load sharing rule are isomorphic to the standard Ising model, and draw consequences thereof for the universality class and behavior of the autocorrelation length of the breakdown transitions corresponding to these models. We also treat damage models having more general power-law interactions, and classify the breakdown process as a function of the power-law interaction exponent. Last, we also show that the probability distribution over configurations is a maximum of Shannon's entropy under some specific constraints related to the energetic balance of the fracture process, which firmly relates this type of quenched-disorder based damage model to standard statistical mechanics.Comment: 16 pages, 3 figure

    Slatted pen floors reduce Salmonella in market swine held in abattoirs

    Get PDF
    The objective of this study was to directly compare Salmonella isolation rates from pig slaughtered after 4 hours holding on slatted or solid concrete floors. Seven truckloads (replicates) of market swine ( 120 kg) from a fully integrated farrow-to-slaughter operation were studied. At unloading, groups of pigs (15-30) were sorted to 1) no-hold (20-45 minutes waiting), 2) pens with solid concrete floors (4 hours), 3) slatted concrete floors (4 hours). Postmortem samples were cultured for Salmonella. Those pigs held in pens with slatted floors (63.6%) had significantly (P \u3c 0.05) less Salmonella in their ceca than those held on solid floors (72.7%)

    Generalized "Quasi-classical" Ground State for an Interacting Two Level System

    Full text link
    We treat a system (a molecule or a solid) in which electrons are coupled linearly to any number and type of harmonic oscillators and which is further subject to external forces of arbitrary symmetry. With the treatment restricted to the lowest pair of electronic states, approximate "vibronic" (vibration-electronic) ground state wave functions are constructed having the form of simple, closed expressions. The basis of the method is to regard electronic density operators as classical variables. It extends an earlier "guessed solution", devised for the dynamical Jahn-Teller effect in cubic symmetry, to situations having lower (e.g., dihedral) symmetry or without any symmetry at all. While the proposed solution is expected to be quite close to the exact one, its formal simplicity allows straightforward calculations of several interesting quantities, like energies and vibronic reduction (or Ham) factors. We calculate for dihedral symmetry two different qq-factors ("qzq_z" and "qxq_x") and a pp-factor. In simplified situations we obtain p=qz+qx1p=q_z +q_x -1. The formalism enables quantitative estimates to be made for the dynamical narrowing of hyperfine lines in the observed ESR spectrum of the dihedral cyclobutane radical cation.Comment: 28 pages, 4 figure

    Transport of NOX emissions from sugarcane fertilisation into the Great Barrier Reef Lagoon

    Get PDF
    The Great Barrier Reef World Heritage Area contains highly sensitive ecosystems that are threatened by the effects of anthropogenic activity including eutrophication. The nearby sugarcane plantations of tropical north Queensland are fertilised annually and there has been ongoing concern about the magnitude of the loss of applied nitrogen to the environment. Previous studies have considered the potential of rainwater run-off to deposit reactive nitrogen species into rivers and ultimately into the Great Barrier Reef Lagoon, but have neglected the possibility of transport via the atmosphere. This paper reports the results of a modelling study commissioned by Australia’s National Heritage Trust aimed at assessing whether or not atmospheric deposition of reactive nitrogen from Queensland’s sugarcane plantations posed a potential threat to the Great Barrier Reef Lagoon. Atmospheric dispersion modelling was undertaken using The Air Pollution Model, developed by Australia’s Commonwealth Scientific and Industrial Research Organisation. Despite the predominance of onshore southeasterly winds, the dispersion model results indicate that 9% of the time during the sugarcane fertilization season (in the modeled years 2001–2006) the meteorological conditions resulted in emissions from the coastal regions of north Queensland being transported out over the ocean around the Great Barrier Reef. The results suggest that there may be a greater efficiency for transport out over the reef during October than for November and December. For the 2 months that exhibited the greatest potential for transport of coastal pollution to the Great Barrier Reef, the modeled deposition of nitrogen oxides (NOX) into the Great Barrier Reef lagoon was less than 1% of the total emissions from the sugarcane plantations, but was not zero. Our model has a simple chemical scheme that does not cover the full chemistry of all reactive nitrogen compounds and so the results are only indicative of the potential levels of deposition. Nevertheless, our study shows that small amounts of NOX that originate from sugarcane fertilization may be transported and dry deposited into the Great Barrier Reef lagoon. Other pathways not included in the modeling scheme may provide a more efficient transport mechanism. Whilst modern practices for the application of fertilizer to sugarcane plantations have drastically reduced emissions, the potential efficiency of transport of pollutants via the atmosphere may be of concern for other more highly polluting agricultural industries

    The Greenhouse Gas Climate Change Initiative (GHG-CCI): comparative validation of GHG-CCI SCIAMACHY/ENVISAT and TANSO-FTS/GOSAT CO₂ and CH₄ retrieval algorithm products with measurements from the TCCON

    Get PDF
    Column-averaged dry-air mole fractions of carbon dioxide and methane have been retrieved from spectra acquired by the TANSO-FTS (Thermal And Near-infrared Sensor for carbon Observations-Fourier Transform Spectrometer) and SCIAMACHY (Scanning Imaging Absorption Spectrometer for Atmospheric Cartography) instruments on board GOSAT (Greenhouse gases Observing SATellite) and ENVISAT (ENVIronmental SATellite), respectively, using a range of European retrieval algorithms. These retrievals have been compared with data from ground-based high-resolution Fourier transform spectrometers (FTSs) from the Total Carbon Column Observing Network (TCCON). The participating algorithms are the weighting function modified differential optical absorption spectroscopy (DOAS) algorithm (WFMD, University of Bremen), the Bremen optimal estimation DOAS algorithm (BESD, University of Bremen), the iterative maximum a posteriori DOAS (IMAP, Jet Propulsion Laboratory (JPL) and Netherlands Institute for Space Research algorithm (SRON)), the proxy and full-physics versions of SRON's RemoTeC algorithm (SRPR and SRFP, respectively) and the proxy and full-physics versions of the University of Leicester's adaptation of the OCO (Orbiting Carbon Observatory) algorithm (OCPR and OCFP, respectively). The goal of this algorithm inter-comparison was to identify strengths and weaknesses of the various so-called round- robin data sets generated with the various algorithms so as to determine which of the competing algorithms would proceed to the next round of the European Space Agency's (ESA) Greenhouse Gas Climate Change Initiative (GHG-CCI) project, which is the generation of the so-called Climate Research Data Package (CRDP), which is the first version of the Essential Climate Variable (ECV) "greenhouse gases" (GHGs). For XCO₂, all algorithms reach the precision requirements for inverse modelling (< 8 ppm), with only WFMD having a lower precision (4.7 ppm) than the other algorithm products (2.4–2.5 ppm). When looking at the seasonal relative accuracy (SRA, variability of the bias in space and time), none of the algorithms have reached the demanding < 0.5 ppm threshold. For XCH₄, the precision for both SCIAMACHY products (50.2 ppb for IMAP and 76.4 ppb for WFMD) fails to meet the < 34 ppb threshold for inverse modelling, but note that this work focusses on the period after the 2005 SCIAMACHY detector degradation. The GOSAT XCH₄ precision ranges between 18.1 and 14.0 ppb. Looking at the SRA, all GOSAT algorithm products reach the < 10 ppm threshold (values ranging between 5.4 and 6.2 ppb). For SCIAMACHY, IMAP and WFMD have a SRA of 17.2 and 10.5 ppb, respectively
    corecore