14,197 research outputs found

    Cost analysis of new and retrofit hot-air type solar assisted heating systems

    Get PDF
    A detailed cost analysis/cost improvement study was performed on two Department of Energy/National Aeronautics and Space Administration operational test sites to determine actual costs and potential cost improvements of new and retrofit hot air type, solar assisted heating and hot water systems for single family sized structures. This analysis concentrated on the first cost of a system which included procurement, installation, and integration of a solar assisted heating and hot water system on a new or retrofit basis; it also provided several cost projections which can be used as inputs to payback analyses, depending upon the degree of optimism or future improvements assumed. Cost definitions were developed for five categories of cost, and preliminary estimates were developed for each. The costing methodology, approach, and results together with several candidate low cost designs are described

    Gauge fields, ripples and wrinkles in graphene layers

    Full text link
    We analyze elastic deformations of graphene sheets which lead to effective gauge fields acting on the charge carriers. Corrugations in the substrate induce stresses, which, in turn, can give rise to mechanical instabilities and the formation of wrinkles. Similar effects may take place in suspended graphene samples under tension.Comment: contribution to the special issue of Solid State Communications on graphen

    Hydrogen thermal conductivity at temperatures from 2000 to 4000 deg F Final report

    Get PDF
    Hydrogen thermal conductivity at temperatures from 2000 to 4600 deg

    A spectrum of carbon dioxide from 800 to 5500 cm-1

    Get PDF
    An atlas of CO2 lines obtained from long path length samples at 296 K is presented. Many of the line centers are marked and their positions tabulated

    Discovery of distant high luminosity infrared galaxies

    Get PDF
    We have developed a method for selecting the most luminous galaxies detected by IRAS based on their extreme values of R, the ratio of 60 micron and B-band luminosity. These objects have optical counterparts that are close to or below the limits of Schmidt surveys. We have tested our method on a 1079 deg^2 region of sky, where we have selected a sample of IRAS sources with 60 micron flux densities greater than 0.2 Jy, corresponding to a redshift limit z~1 for objects with far-IR luminosities of 10^{13} L_sun. Optical identifications for these were obtained from the UK Schmidt Telescope plates, using the likelihood ratio method. Optical spectroscopy has been carried out to reliably identify and measure the redshifts of six objects with very faint optical counterparts, which are the only objects with R>100 in the sample. One object is a hyperluminous infrared galaxy (HyLIG) at z=0.834. Of the remaining, fainter objects, five are ultraluminous infrared galaxies (ULIGs) with a mean redshift of 0.45, higher than the highest known redshift of any non-hyperluminous ULIG prior to this study. High excitation lines reveal the presence of an active nucleus in the HyLIG, just as in the other known infrared-selected HyLIGs. In contrast, no high excitation lines are found in the non-hyperluminous ULIGs. We discuss the implications of our results for the number density of HyLIGs at z<1 and for the evolution of the infrared galaxy population out to this redshift, and show that substantial evolution is indicated. Our selection method is robust against the presence of gravitational lensing if the optical and infrared magnification factors are similar, and we suggest a way of using it to select candidate gravitationally lensed infrared galaxies.Comment: 6 pages, accepted for publication in A&

    Conicoid Mirrors

    Get PDF
    The first order equation relating object and image location for a mirror of arbitrary conic-sectional shape is derived. It is also shown that the parabolic reflecting surface is the only one free of aberration and only in the limiting case of distant sources.Comment: 9 page

    Raymond Concrete Cylinder Files in Arabian Gulf

    Get PDF
    The primary purpose of this paper is to present a case history of the main events which occurred in the design and construction of the Ju\u27Aymah Trestle. The load testing program was an essential and very interesting part of that history, and as such it will be discussed in this paper. However, the entire load test results will not be presented as this data has already been published in Foundation Facts, (1979) Raymond International Builders, Inc. periodic technical publication. We will present both the successes and failures which occurred in design and construction and will try to explain the reasons why some procedures were successful and others were not

    Reducing smoking in adolescents: cost-effectiveness results from the cluster randomized ASSIST (A Stop Smoking In Schools Trial)

    Get PDF
    Introduction: School-based smoking prevention programmes can be effective, but evidence on cost-effectiveness is lacking. We conducted a cost-effectiveness analysis of a school-based “peer-led” intervention.&lt;p&gt;&lt;/p&gt; Methods: We evaluated the ASSIST (A Stop Smoking In Schools Trial) programme in a cluster randomized controlled trial. The ASSIST programme trained students to act as peer supporters during informal interactions to encourage their peers not to smoke. Fifty-nine secondary schools in England and Wales were randomized to receive the ASSIST programme or usual smoking education. Ten thousand seven hundred and thirty students aged 12–13 years attended participating schools. Previous work has demonstrated that the ASSIST programme achieved a 2.1% (95% CI = 0%–4.2%) reduction in smoking prevalence. We evaluated the public sector cost, prevalence of weekly smoking, and cost per additional student not smoking at 24 months.&lt;p&gt;&lt;/p&gt; Results: The ASSIST programme cost of £32 (95% CI = £29.70–£33.80) per student. The incremental cost per student not smoking at 2 years was £1,500 (95% CI = £669–£9,947). Students in intervention schools were less likely to believe that they would be a smoker at age 16 years (odds ratio [OR] = 0.80; 95% CI = 0.66–0.96).&lt;p&gt;&lt;/p&gt; Conclusions: A peer-led intervention reduced smoking among adolescents at a modest cost. The intervention is cost-effective under realistic assumptions regarding the extent to which reductions in adolescent smoking lead to lower smoking prevalence and/or earlier smoking cessation in adulthood. The annual cost of extending the intervention to Year 8 students in all U.K. schools would be in the region of £38 million and could result in 20,400 fewer adolescent smokers.&lt;p&gt;&lt;/p&gt

    M Dwarfs from Hubble Space Telescope Star Counts. IV

    Get PDF
    We study a sample of about 1400 disk M dwarfs that are found in 148 fields observed with the Wide Field Camera 2 (WFC2) on the Hubble Space Telescope and 162 fields observed with pre-repair Planetary Camera 1 (PC1), of which 95 of the WFC2 fields are newly analyzed. The method of maximum likelihood is applied to derive the luminosity function and the Galactic disk parameters. At first, we use a local color-magnitude relation and a locally determined mass-luminosity relation in our analysis. The results are consistent with those of previous work but with considerably reduced statistical errors. These small statistical errors motivate us to investigate the systematic uncertainties. Considering the metallicity gradient above the Galactic plane, we introduce a modified color-magnitude relation that is a function of Galactic height. The resultant M dwarf luminosity function has a shape similar to that derived using the local color-magnitude relation but with a higher peak value. The peak occurs at MV12M_V \sim 12 and the luminosity function drops sharply toward MV14M_V \sim 14. We then apply a height-dependent mass-luminosity function interpolated from theoretical models with different metallicities to calculate the mass function. Unlike the mass function obtained using local relations, which has a power-law index α=0.47\alpha = 0.47, the one derived from the height-dependent relations tends to be flat (α=0.10\alpha = -0.10). The resultant local surface density of disk M dwarfs (12.2 +/- 1.6 M_sun pc^{-2}) is somewhat smaller than the one obtained using local relations (14.3 +/- 1.3 M_sun pc^{-2}). Our measurement favors a short disk scale length, H = 2.75 +/- 0.16 (statistical) +/- 0.25 (systematic) kpc.Comment: 20 pages, 10 ps figures, accepted for publication in Ap
    corecore