How do college/university teacher misbehaviors influence student cognitive learning, academic self-efficacy, motivation, and curiosity?

The purpose of this research was to examine the relationship between teacher misbehaviors and a variety of outcome variables, including cognitive learning, motivation, curiosity, and academic self-efficacy. Research has yet to directly address how teacher misbehaviors affect cognitive learning. It is important to assess actual learning as opposed to perceived learning to truly measure how a students\u27 learning is influenced by the negative behaviors. Motivation, curiosity, and academic self-efficacy have been found to have a positive relationship with learning. When misbehaviors were present cognitive learning and motivation were not found to be significantly influenced by misbehaviors. Academic self-efficacy and curiosity were found to be negatively influenced by specific teacher misbehavior. Further discussion and implications were discussed

Radio galaxies and their magnetic fields out to z <= 3

We present polarisation properties at $1.4\,$GHz of two separate extragalactic source populations: passive quiescent galaxies and luminous quasar-like galaxies. We use data from the {\it Wide-Field Infrared Survey Explorer} data to determine the host galaxy population of the polarised extragalactic radio sources. The quiescent galaxies have higher percentage polarisation, smaller radio linear size, and $1.4\,$GHz luminosity of $6\times10^{21}<L_{\rm 1.4}<7\times10^{25}\,$W Hz$^{-1}$, while the quasar-like galaxies have smaller percentage polarisation, larger radio linear size at radio wavelengths, and a $1.4\,$GHz luminosity of $9\times10^{23}<L_{\rm 1.4}<7\times10^{28}\,$W Hz$^{-1}$, suggesting that the environment of the quasar-like galaxies is responsible for the lower percentage polarisation. Our results confirm previous studies that found an inverse correlation between percentage polarisation and total flux density at $1.4\,$GHz. We suggest that the population change between the polarised extragalactic radio sources is the origin of this inverse correlation and suggest a cosmic evolution of the space density of quiescent galaxies. Finally, we find that the extragalactic contributions to the rotation measures (RMs) of the nearby passive galaxies and the distant quasar-like galaxies are different. After accounting for the RM contributions by cosmological large-scale structure and intervening Mg\,{II} absorbers we show that the distribution of intrinsic RMs of the distant quasar-like sources is at most four times as wide as the RM distribution of the nearby quiescent galaxies, if the distribution of intrinsic RMs of the WISE-Star sources itself is at least several rad m$^{-2}$ wide.Comment: 12 pages, 8 figures, accepted for publication into MNRA

Thermal tides in the Martian middle atmosphere as seen by the Mars Climate Sounder

The first systematic observations of the middle atmosphere of Mars (35–80km) with the Mars Climate Sounder (MCS) show dramatic patterns of diurnal thermal variation, evident in retrievals of temperature and water ice opacity. At the time of writing, the data set of MCS limb retrievals is sufficient for spectral analysis within a limited range of latitudes and seasons. This analysis shows that these thermal variations are almost exclusively associated with a diurnal thermal tide. Using a Martian general circulation model to extend our analysis, we show that the diurnal thermal tide dominates these patterns for all latitudes and all seasons

Patient Outcomes in Palliative Care, Report 13 (January - June 2012) - Western Australia

PCOC aims to assist services to improve the quality of the palliative care they provide through the analysis and benchmarking of patient outcomes. In this, the thirteenth PCOC report, data submitted for the January - June 2012 period are summarised and patient outcomes benchmarked to enable participating services to assess their performance and identify areas in which they may improve. This report is broken into four sections: Section 1 provides a summary of the data included in this report. Section 2 summarises each of the four outcome measures and presents national benchmarking results for a selection of these measures. Section 3 presents a more detailed analysis of the outcome measures and benchmarks. Section 4 provides descriptive analysis at each of the patient, episode and phase data levels. In each of the four sections, data and analysis for services in WA is presented alongside the national figures for comparative purposes. The national figures reflect all palliative care services who submitted data for the January - June 2012 period. A full list of these services can be found at www.pcoc.org.au The four outcome measures included in this report were first introduced in the reporting period January to June 2009 (Report 7). There is strong sectoral support for national benchmarks and a consensus that such benchmarks can drive service innovation regardless of model of care. Benchmarking provides opportunities to understand the services that are provided, the outcomes patients experience and also to generate research opportunities focused on how to demonstrate variations in practice and outcomes

Abrasion process between a fibre mooring line and a corroded steel element during the transit and commissioning of a Marine Renewable Energy device

Copyright © 2015 Elsevier. NOTICE: this is the author’s version of a work that was accepted for publication in Engineering Failure Analysis. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Engineering Failure Analysis, Vol 60, (2016)] DOI: 10.1016/j.engfailanal.2015.11.037The interaction between fibre rope and steel parts on vessels (fairlead and roller) is technically well understood but not commonly published in codes or practised by mariners. What appears to be a smooth steel surface to the naked eye can still be abrasive medium to synthetic mooring components. There are very few reports of external rope abrasion tests in the literature. The surface finish at the contact between the rope and the steel guide can cause damage and consequently prematurely degrade the exposed yarns of the rope and thus reduce the overall load bearing capacity of the rope. The ISO 18692 standard [1] recommends that prolonged cycling of a rope around rollers should be avoided, however it is specified that occasional bending and running over rollers is allowable. There are two guides to specify surface roughness. MEG 3 [2] states that steel fairleads should be polished to Ra10, but in practice this may be difficult to achieve or obtain with carbon steel. US Navy guide also states that the surface of steel should have better than 125 μi or 3.2Ra [3]. The study presented here discusses the bending of a synthetic rope around a roller during transportation. It relates the motion behaviour of the vessel to rope wear and provides a detailed numerical simulation correlated with post analysis of the rope after the failure. The investigations show that the roughness of the steel roller caused the abrasion of the rope and was exacerbated through the vessel dynamics, leaving a residual strength of 14% MBL, before rupture. The experimental tests have established a linear behaviour between strength loss and surface roughness and it was observed that the abrasion mainly occurs in the early stages of load cycling. The presented work recommends the use of lubricated nylon or polished stainless steel instead of carbon steel rollers to limit abrasive rope wear. The paper also devises a methodology to carefully assess and quantify potential rope abrasion to ensure that the residual rope strength withstands the required load capacity.Marine Renewables Commercialisation Fund (MRCF) administrated by the Carbon Trust under the Array Technology Innovation Programm

Combined analysis of microbial metagenomic and metatranscriptomic sequencing data to assess in situ physiological conditions in the premature infant gut.

Microbes alter their transcriptomic profiles in response to the environment. The physiological conditions experienced by a microbial community can thus be inferred using meta-transcriptomic sequencing by comparing transcription levels of specifically chosen genes. However, this analysis requires accurate reference genomes to identify the specific genes from which RNA reads originate. In addition, such an analysis should avoid biases in transcript counts related to differences in organism abundance. In this study we describe an approach to address these difficulties. Sample-specific meta-genomic assembled genomes (MAGs) were used as reference genomes to accurately identify the origin of RNA reads, and transcript ratios of genes with opposite transcription responses were compared to eliminate biases related to differences in organismal abundance, an approach hereafter named the "diametric ratio" method. We used this approach to probe the environmental conditions experienced by Escherichia spp. in the gut of 4 premature infants, 2 of whom developed necrotizing enterocolitis (NEC), a severe inflammatory intestinal disease. We analyzed twenty fecal samples taken from four premature infants (4-6 time points from each infant), and found significantly higher diametric ratios of genes associated with low oxygen levels in samples of infants later diagnosed with NEC than in samples without NEC. We also show this method can be used for examining other physiological conditions, such as exposure to nitric oxide and osmotic pressure. These study results should be treated with caution, due to the presence of confounding factors that might also distinguish between NEC and control infants. Nevertheless, together with benchmarking analyses, we show here that the diametric ratio approach can be applied for evaluating the physiological conditions experienced by microbes in situ. Results from similar studies can be further applied for designing diagnostic methods to detect NEC in its early developmental stages

Hypernetwork functional image representation

Motivated by the human way of memorizing images we introduce their functional representation, where an image is represented by a neural network. For this purpose, we construct a hypernetwork which takes an image and returns weights to the target network, which maps point from the plane (representing positions of the pixel) into its corresponding color in the image. Since the obtained representation is continuous, one can easily inspect the image at various resolutions and perform on it arbitrary continuous operations. Moreover, by inspecting interpolations we show that such representation has some properties characteristic to generative models. To evaluate the proposed mechanism experimentally, we apply it to image super-resolution problem. Despite using a single model for various scaling factors, we obtained results comparable to existing super-resolution methods

Improved genome annotation through untargeted detection of pathway-specific metabolites

<p>Abstract</p> <p>Background</p> <p>Mass spectrometry-based metabolomics analyses have the potential to complement sequence-based methods of genome annotation, but only if raw mass spectral data can be linked to specific metabolic pathways. In untargeted metabolomics, the measured mass of a detected compound is used to define the location of the compound in chemical space, but uncertainties in mass measurements lead to "degeneracies" in chemical space since multiple chemical formulae correspond to the same measured mass. We compare two methods to eliminate these degeneracies. One method relies on natural isotopic abundances, and the other relies on the use of stable-isotope labeling (SIL) to directly determine C and N atom counts. Both depend on combinatorial explorations of the "chemical space" comprised of all possible chemical formulae comprised of biologically relevant chemical elements.</p> <p>Results</p> <p>Of 1532 metabolic pathways curated in the MetaCyc database, 412 contain a metabolite having a chemical formula unique to that metabolic pathway. Thus, chemical formulae alone can suffice to infer the presence of some metabolic pathways. Of 248,928 unique chemical formulae selected from the PubChem database, more than 95% had at least one degeneracy on the basis of accurate mass information alone. Consideration of natural isotopic abundance reduced degeneracy to 64%, but mainly for formulae less than 500 Da in molecular weight, and only if the error in the relative isotopic peak intensity was less than 10%. Knowledge of exact C and N atom counts as determined by SIL enabled reduced degeneracy, allowing for determination of unique chemical formula for 55% of the PubChem formulae.</p> <p>Conclusions</p> <p>To facilitate the assignment of chemical formulae to unknown mass-spectral features, profiling can be performed on cultures uniformly labeled with stable isotopes of nitrogen (¹⁵N) or carbon (¹³C). This makes it possible to accurately count the number of carbon and nitrogen atoms in each molecule, providing a robust means for reducing the degeneracy of chemical space and thus obtaining unique chemical formulae for features measured in untargeted metabolomics having a mass greater than 500 Da, with relative errors in measured isotopic peak intensity greater than 10%, and without the use of a chemical formula generator dependent on heuristic filtering. These chemical formulae can serve as indicators for the presence of particular metabolic pathways.</p