355 research outputs found
Experimentation of a PVA-Borax hydrogel for the removal of Paraloid B72® from artifacts of archaeological interest from the National Archaeological Museum in Naples, Italy
This paper shows the results of an experimentation aimed at the removal of a polymeric film of aged Paraloid B72® originally placed to protect some wooden artifacts belonging to the Egyptian collection of the National Archaeological Museum of Naples (MANN). The study was conducted on two shabtis dated to the 19th Dynasty and a sculpture of Ptah-Sokar-Osiris dating to the late period. Thanks to the collaboration between the National Archaeological Museum of Naples and the Laboratory of Restoration of Wooden Artifacts of the University of Naples Suor Orsola Benincasa, it was possible to conduct an in-depth study of the artifacts, from both an archaeological-historical point of view and from a conservation point of view. This led to the development of the above-mentioned experimentation and to the planning of a proper restoration intervention. The study and experimentation were supported by several diagnostic techniques. In a first stage, non-invasive investigations were carried out to study the execution technique and the state of conservation of the artifacts. This allowed the recognition of the wood species that constituted the three sculptures through optical microscopy, whereas IR reflectography, UV induced fluorescence and X-ray radiation (XRF) were conducted to identify the type and the chemical nature of the pigments. Based on the above analysis, different restoration strategies, based on the removal of Paraloid B72® through a methodology that would act in full respect of the wooden support of the artifacts, were considered. Pros and cons of the different methodologies applied in the recent past for the removal of aged Paraloid from artifact surfaces were analysed. A removal technique based on the use PVA-Borax hydrogel loaded with a solvent mixture was selected. Experiments were conducted to validate the effectiveness of the selected method
Micrometeoroid infall onto Saturn’s rings constrains their age to no more than a few hundred million years
There is ongoing debate as to whether Saturn’s main rings are relatively young or ancient— having been formed shortly after Saturn or during the Late Heavy Bombardment. The rings are mostly water-ice but are polluted by non-icy material with a volume fraction ranging from ∼0.1 to 2%. Continuous bombardment by micrometeoroids exogenic to the Saturnian system is a source of this non-icy material. Knowledge of the incoming mass flux of these pollutants allows estimation of the rings’ exposure time, providing a limit on their age. Here we report the final measurements by Cassini’s Cosmic Dust Analyzer of the micrometeoroid flux into the Saturnian system. Several populations are present, but the flux is dominated by low-relative velocity objects such as from the Kuiper belt. We find a mass flux between 6.9 · 10−17 and 2.7 · 10−16 kg m−2s−1 from which we infer a ring exposure time ≲100 to 400 million years in support of recent ring formation scenarios
Analysis of health care and actual needs of patients with psoriasis: a survey on the Italian population
Background: Over recent years the public health system has shown increasing interest in patients' views for use as guideline criteria in evaluating the quality of assistance above all for those patients with chronic diseases. Hence the interest in psoriasis, which is a chronic disease frequently associated with diabetes mellitus, hypertension, obesity, and cardiovascular diseases. The aims of our study were to describe clinic characteristics of patients with psoriasis, the quality of the assistance perceived by patients arrived at outpatients clinics and the information received, in order to identify areas in Italy requiring improvement. Methods: 1954 patients, aged between 18 and 85 years, were consecutively enrolled at outpatients clinics across 21 Italian provinces over the period December 2004 - January 2006. A standardized questionnaire was developed in collaboration with an Italian Association of Psoriatic Patients ( A. DI. PSO) and tested in a pilot study. The questionnaire was divided into three sections: the first section included social, demographic and individual variables; the second concerned the quality of the assistance perceived by the patients at public dermatologic clinics and the third focused on the need of information requirements of patients with psoriasis. The chi(2) test was used to estimate the association between the categorical variables under study. Kruskal-Wallis test was applied to the interval and ordinal variables. Results: The presence of psoriatic arthritis was reported in 26.0% of patients. Associated chronic diseases included depression (15.4%), hypertension (13.3%), obesity (8.9%) and type 2 diabetes mellitus (7.3%). The study highlighted the need of improvements of health care services at public dermatologic clinics especially in overcoming architectonic barriers and reducing appointment wait-times, particularly in South Italy. However, patients reported a positive relationship with Health System employers due to the confidentiality. This positive impression was confirmed by the observation that dermatologists were considered the best source of information about therapies on psoriasis. Conclusion: Our study allowed to identify critical aspects which could be tackled through initiatives with the aim of improving these emerged needs
Usability Characteristics Assessment Protocol Applied to eTouch Ultrasound User-defined workflow Optimization Tool
AbstractThe Ultrasound (US) examination time reduction is an increasing compelling request in sonographer's everyday life. The increased number of patients and the cost reduction are two opposite forces, which can lead the sonographer to work faster without caring about scanning posture. The numerous repeated actions performed can easily lead to Work-related Musculoskeletal Disorders (WRMSD). The analysis of those problems has driven to the definition and implementation of eTouch tool: user-defined Macros appositively created, automatically and sequentially saved and performed in real time by pressing a button. The present work investigates ergonomics and usability performances of a portable US system (MyLabAlpha, Esaote S.p.A., Italy) by using eTouch as well as the classical manual interface in two clinical applications (Abdominal and Vascular). performed by a skilled sonographer on a healthy subject. is. Upper-body kinematic and muscle activation of the sonographer's left arm were recorded through an optoelectronic system (SmartDx400, BTS Spa, Italy) and a multi-channel Wireless Superficial Electromyography (SEMG, Freemg300, BTS Spa, Italy). The number of keystrokes used during the manual procedure was more than 3 times higher than the one with eTouch. This difference implied a reduction of US execution time when using eTouch in comparison with manual use of about 30%. Results of the upper-body kinematic showed that the arm was extended for less time intervals when using eTouch, whereas during the manual procedure there was a greater activation of the deltoid, responsible for the elevation of the shoulder and thus the extension of the arm. SEMG analysis showed that eTouch allowed a significant reduction of muscular activation, especially for the anterior deltoideus. Our findings showed that eTouch is recommendable for decreasing WRMSD risk
Ballistic Impact Testing of Aluminum 2024 and Titanium 6Al-4V for Material Model Development
An experimental program is underway to develop a consistent set of material property and impact test data, and failure analysis, for a variety of materials that can be used to develop improved impact failure and deformation models. Unique features of this set of data are that all material property information and impact test results are obtained using identical materials, the test methods and procedures are extensively documented and all of the raw data is available. This report describes ballistic impact testing which has been conducted on aluminum (Al) 2024 and titanium (Ti) 6Al-4vanadium (V) sheet and plate samples of different thicknesses and with different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade
Improving soil and water conservation and ecosystem services by sustainable soil management practices: From a global to an italian soil partnership
The UN Sustainable Development Goals (SDGs) identify the need to restore degraded soils in order to improve productivity and the provision of ecosystem services. The aim is to support food production, store and supply clean water, conserve biodiversity, sequester carbon, and improve soil resilience in a context of climate change. Within this framework, in order to achieve the SDGs and to correct land management in the long-term, soil management is considered mandatory. The reduction of land degradation should be based on various sustainable soil management practices that improve and maintain soil organic matter levels, increase water infiltration, and improve soil water management. This technical review-a policy paper-summarizes the sustainable and territorial impact of soil degradation, including soil water erosion, from the global level to the European and National levels. Furthermore, with the aim of sharing ongoing soil and water management actions, instruments, and initiatives, we provide information on soil and water conservation activities and prospects in Italy
Accuracy of elastic fusion biopsy in daily practice: results of a multicenter study of 2115 patients
OBJECTIVES:
To assess the accuracy of Koelis fusion biopsy for the detection of prostate cancer and clinically significant prostate cancer in the everyday practice.
METHODS:
We retrospectively enrolled 2115 patients from 15 institutions in four European countries undergoing transrectal Koelis fusion biopsy from 2010 to 2017. A variable number of target (usually 2-4) and random cores (usually 10-14) were carried out, depending on the clinical case and institution habits. The overall and clinically significant prostate cancer detection rates were assessed, evaluating the diagnostic role of additional random biopsies. The cancer detection rate was correlated to multiparametric magnetic resonance imaging features and clinical variables.
RESULTS:
The mean number of targeted and random cores taken were 3.9 (standard deviation 2.1) and 10.5 (standard deviation 5.0), respectively. The cancer detection rate of Koelis biopsies was 58% for all cancers and 43% for clinically significant prostate cancer. The performance of additional, random cores improved the cancer detection rate of 13% for all cancers (P < 0.001) and 9% for clinically significant prostate cancer (P < 0.001). Prostate cancer was detected in 31%, 66% and 89% of patients with lesions scored as Prostate Imaging Reporting and Data System 3, 4 and 5, respectively. Clinical stage and Prostate Imaging Reporting and Data System score were predictors of prostate cancer detection in multivariate analyses. Prostate-specific antigen was associated with prostate cancer detection only for clinically significant prostate cancer.
CONCLUSIONS:
Koelis fusion biopsy offers a good cancer detection rate, which is increased in patients with a high Prostate Imaging Reporting and Data System score and clinical stage. The performance of additional, random cores seems unavoidable for correct sampling. In our experience, the Prostate Imaging Reporting and Data System score and clinical stage are predictors of prostate cancer and clinically significant prostate cancer detection; prostate-specific antigen is associated only with clinically significant prostate cancer detection, and a higher number of biopsy cores are not associated with a higher cancer detection rate
Recommended from our members
Analysis of liquid-solids suspension velocities and concentrations obtained by NMR imaging
COMMIX-M, a three-dimensional transient and steady-state computer program written in Cartesian and cylindrical coordinates, has been developed by Argonne National Laboratory. This computer program is capable of analyzing multiphase flow and heat transfer and utilizes the separate phases model wherein each phase has its own mass, momentum, and energy equations. This computer program is in its early stages of development for application to test various interphase interaction models and to predict design and processing of dense fluid-solids suspension systems. COMMIX-M contains preliminary constitutive relationships for interfacial drag, solids viscosities and stresses to describe the solids rheology, and shear lift forces from the literature. Also included is a solids partial slip boundary condition to allow non-zero tangential velocity at the tube walls. Analyses of some of the steady-state, fully-developed isothermal carrier fluid velocity and solids concentration data of Altobelli et al. and Sinton and Chow are presented. These experimental data obtained using three-dimensional time-of-flight nuclear magnetic (NMR) imaging techniques were carefully performed and represent some of the best available open literature data of their kind. NMR imaging offers powerful techniques to non-intrusively determine three-dimensional time-dependent velocity and concentration fields to assist development and validation of the constitutive models and the computer programs describing concentrated suspensions. Analyses of these NMR data, together with comparisons of computed and measured concentration and velocity profiles provide some insights into the mechanisms governing the observed phenomena. Recommendations for future research are given. To the authors` knowledge, these are the first such comparisons of theory and experiment
An Analysis of Preference Weights and Setting Priorities by Irrigation Advisory Services Users Based on the Analytic Hierarchy Process
Objective: Stakeholders-farmers from four different European areas (Campania (IT), Kujawsko-Pomorskie (PL), Limburg (NL), Andalusia (ES))-are asked to share, from the OPERA project, their opinions on five criteria that all aim at improving the use of irrigation advisory services (IASs). Each criterion has different characteristics that affect the way farmers rank it. The present study has two objectives. The first is to individuate the priorities of the preferences expressed by the stakeholders. The second objective is to carry out a ranking of the weights of the criteria by case study, ranking the groups and their associated properties among farmers' profiles. Methods: The answers to 120 questionnaires dispensed to the future users of IASs in the four agricultural sites were analyzed in detail, and then the given priorities were evaluated through the analytic hierarchy process (AHP). The AHP methodology was used to determine the relative weights of the five assessment criteria, and finally, to select the one with major value. Results and conclusions: The results show that A5 (assuring economic sustainability) was the most important criterion. The contributions provided by this study are twofold: Firstly, it presents an application of a methodology that involves the conversion of a linguistic judgement of farmers in a correspondence weight. Secondly, it tackles decision making regarding improving the use of IASs, evaluating the preferences expressed by the stakeholders. Irrigation advisory services can play a key role in assisting users to adopt new techniques and technologies for more efficient water use and increased production
- …