AGED 539 Graduate Internship Report-Golden Valley High School

This internship and project report includes documentation required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The documents are concurrently used for the Agriculture Incentive Grant review process at Golden Valley High School conducted by representatives of the California Department of Education. The supporting material includes information to receive state and local funding, outline the goals and objectives of the program, along with an overview of Golden Valley High School, the agriculture program and the community

Análisis criptopaleontológico del lapidario de Teofrastro (s. III a.C.)

La obra"Perì líthon" o"Tratado de Piedras" de Teofrasto, es considerado el texto más antiguo conservado sobre minerales y rocas, aunque haya llegado hasta nosotros incompleto. En este trabajo se analiza su contenido comparándolo con el de otros lapidarios antiguos y se concluye que once de las piedras que refiere y que vienen indicadas con nombres geográficos o crípticos son fósiles de plantas, vertebrados o químicos. Por eso, esta obra debe considerarse también como el tratado más antiguo que conocemos sobre paleontología, pues además de los fósiles que menciona, en ella se alude expresamente al proceso de fosilización. Palabras clave: Criptopaleontología

Determination of Nicotine in Cigarette Tobacco Smuggled to Brazil by Modified QuEChERS Methodology

The study of cigarette authenticity in Brazil is important due to increasing consumption of contraband cigarettes. Nicotine concentration is an important parameter reflecting the quality of tobacco used in the production of these cigarettes. Simple methods for this determination, which produce reduced waste, are environmentally and industrially important. The nicotine concentration of smuggled cigarette tobacco was determined by the QuEChERS method, requiring some modifications, such as decreasing the volume of the extractor solvent, changes in pH, and removal of the sample hydration step. Quantification was performed by gas chromatography using a flame ionization detector. The Doehlert matrix design was used to optimize the method. The extraction recoveries ranged from 97.5% to 99.6%, with relative standard deviation (RSD) ≤ 2.5% and limits of detection and quantification of 0.6 mg L-1 and 2.5 mg L-1, respectively. The method was sensitive and accurate for the detection and quantification of nicotine. The nicotine concentration in contraband cigarettes was found to be lower than that observed in legal cigarettes. The method was successfully applied to real samples of smuggled and legal cigarettes, providing a robust method for routine analysis and proving the need for more studies on quality control of smuggled cigarettes in Brazil

Remote Sensing Experiments Using the Rogue-alpha,beta CubeSats as a Constellation: High Frame Rate Environmental Observations from Agile, Taskable, Infrared and Visible Sensors in Low Earth Orbit

The Aerospace Corporation’s Rogue-alpha,beta program built and launched two 3-Unit CubeSats in 18-months, each equipped with modified commercial infrared camera payloads, visible context cameras, laser communications and precision pointing capabilities. Launched on November 2, 2019, the two spacecraft (Rogue-alpha and beta) were boosted and released from the International Space Station Cygnus NG-12 robotic resupply spacecraft on January 31, 2020 into a circular 460-km, 52° inclined orbit. The primary Rogue IR sensor is a 1.4-micron band, 640x512 pixel, 28° field of view, InGaAs short wavelength infrared (SWIR) camera. It is accompanied by a panchromatic, 10-megapixel, 37° field of view visible context camera. In addition, the narrow- and wide-field-of-view star sensors may also be utilized as nighttime sensors. During the first two years of spaceflight, the Rogue satellites conducted a series of experiments using both spacecraft to conduct cooperative remote sensing observations and to test the capabilities of the 1.4-micron water overtone band. These included: 1) fore-aft pointing using two spacecraft for stereo observations of cloud structure and altitude, 2) horizon-pointed imaging in all directions relative to the spacecraft orbit (fore, aft, port, and starboard) to maximize the imaged field of view, 3) pre-programmed point-and-stare imaging, 4) nadir-pointed operations for vicarious calibration with other satellites. All of these modes of operation are usually conducted in multi-frame collections at 1-20 frames-per-second for dozens to thousands of frames. During the mission we investigated different modes of collecting data, taking advantage of the evolving orbital spacing of the pair of CubeSats. Initial close satellite spacing allowed along-track fore-aft stereo observations of weather formations, as well as pre-programmed tip-and-queue observations, and sequential point-and-stare experiments aimed at collecting minutes of data on targets of interest. Cloud altitude was measured on weather events by simultaneous stereo observations, and by mono observations using the changing view angles during a constant point along track or slewing during a pass. Observations were collected on hurricanes, typhoons, thunderstorms, monsoon storms, and forecasted tornadic weather. Unique observations of severe wildfires were collected, exploring the capability for our 1.4micron band to detect fires during daytime, and to characterize pyrocumulonimbus clouds. Nighttime observations were also made of human lighting, infrared sources, and moonlight-illuminated clouds, including observations utilizing the Rogue satellites’ star sensors for remote sensing tests. These experiments collectively explored the possibilities for dynamically tasked, high-frame-rate, low-earth-orbit sensors to carry out weather and environmental monitoring missions in ways that differ from traditional scanned or push-broom satellite sensor systems. We will present a summary of our tasking ConOps, observations of weather events and fires, and highlight results and techniques for cloud height characterization by our two CubeSat constellation during its first two years on orbit. Our results with two satellites demonstrate possibilities for future missions using cooperative tasking in larger constellations of dynamically tasked sensors in low Earth orbit

Flight Operations of Two Rapidly Assembled CubeSats with Commercial Infrared Cameras: The Rogue-Alpha,Beta Program

The Aerospace Corporation’s Rogue-alpha, betaprogram, co-funded by the Space and Missile Systems Center’s Development Corps, is a rapid prototyping effort that built and launched two 3-Unit CubeSats equipped with modified commercial IR camera payloads, laser communications and precision pointing capabilities in 18-months. Launched on 2 November 2019, the two spacecraft were released from the ISS Cygnus NG-12 robotic resupply spacecraft on 31 January 2020 into a circular 460-km, 52° inclined orbit. The two Rogue spacecraft are serving as testbeds for studying wide-field-of-view fast-framing imaging, on-orbit stellar calibration techniques for small IR payloads, and associated spacecraft flight operations. Precision pointing is enabled by three star sensors. High data rate sensor observations are enabled by the ultra-compact 200 Mbps lasercom system, which downlinks gigabytes of stored data during a single laser contact, using The Aerospace Corporation’s prototype ground stations located in El Segundo, California. The Rogue-alpha, beta IR sensor is a 1.4 micron band, 640x512 pixel, 28° field of view, InGaAs SWIR camera. It is accompanied by a panchromatic, 10-megapixel, 37° field of view visible context camera. Modes of sensor operation have included: 1) horizon-pointed imaging in all directions relative to the spacecraft orbit (fore, aft, port, and starboard) which is designed to maximize the imaged field of view, 2) point-and-stare imaging, 3) nadir-pointed, and 4) stereo fore-aft pointing using both spacecraft. All of these modes of operation are usually conducted in multi-frame collections at 1-20hz for dozens to thousands of frames. Highlights from the Rogue-alpha, beta sensor Earth remote sensing observation experiments will be presented. These have included impressive video imagery of hurricanes, typhoons, thunderstorms, and high clouds in the intra-tropical convergence zone. Infrared and visible point sources studied include gas flares, wildfires, active volcanos, nighttime lights, and other phenomena, including the first infrared CubeSat observations of space launch upper stages in flight. Stereo cloud imaging observations were also conducted with an aim of better understanding Earth backgrounds from low Earth orbit. Highlights from the CubeSat flight operations experiments include: 1) spacecraft-to-spacecraft boresight alignment of Rogue’s lasercom systems, and 2) metric and radiometric calibration of Rogue’s flight cameras using bright infrared stars. The results from the Rogue-alpha, beta460-km orbit show the exciting possibilities for wide-field-of-view missions from low earth orbit

On the constitution of sodium at higher densities

Using density functional theory the atomic and electronic structure of sodium are predicted to depart substantially from those expected of simple metals for $r_s 130$ GPa). Newly-predicted phases include those with low structural symmetry, semi-metallic electronic properties (including zero-gap semiconducting limiting behavior), unconventional valence charge density distributions, and even those that raise the possibility of superconductivity, all at currently achievable pressures. Important differences emerge between sodium and lithium at high densities, and these are attributable to corresponding differences in their respective cores.Comment: 13 pages; 3 figure

A prospective cohort study of postoperative complications in the management of perforated peptic ulcer

BACKGROUND: With dwindling rates of postoperative mortality in perforated peptic ulcer that is attributable to H(2)-receptor blocker usage, there is a need to shift the focus towards the prevention of postoperative morbidity. Further, the simultaneous contribution of several putative clinical predictors to this postoperative morbidity is not fully appreciated. Our objective was to assess the predictors of the risk, rate and number of postoperative complications in surgically treated patients of perforated peptic ulcer. METHODS: In a prospective cohort study of 96 subjects presenting as perforated peptic ulcer and treated using Graham's omentoplatsy patch or gastrojejunostomy (with total truncal vagotomy), we assessed the association of clinical predictors with three domains of postoperative complications: the risk of developing a complication, the rate of developing the first complication and the risk of developing higher number of complications. We used multiple regression methods – logistic regression, Cox proportional hazards regression and Poisson regression, respectively – to examine the association of the predictors with these three domains. RESULTS: We observed that the risk of developing a postoperative complication was significantly influenced by the presence of a concomitant medical illness [odds ratio (OR) = 8.9, p = 0.001], abdominal distension (3.8, 0.048) and a need of blood transfusion (OR = 8.2, p = 0.027). Using Poisson regression, it was observed that the risk for a higher number of complications was influenced by the same three factors [relative risk (RR) = 2.6, p = 0.015; RR = 4.6, p < 0.001; and RR = 2.4, p = 0.002; respectively]. However, the rate of development of complications was influenced by a history suggestive of shock [relative hazards (RH) = 3.4, p = 0.002] and A(- )blood group (RH = 4.7, p = 0.04). CONCLUSION: Abdominal distension, presence of a concomitant medical illness and a history suggestive of shock at the time of admission warrant a closer and alacritous postoperative management in patients of perforated peptic ulcer

Test of a theoretical equation of state for elemental solids and liquids

We propose a means for constructing highly accurate equations of state (EOS) for elemental solids and liquids essentially from first principles, based upon a particular decomposition of the underlying condensed matter Hamiltonian for the nuclei and electrons. We also point out that at low pressures the neglect of anharmonic and electron-phonon terms, both contained in this formalism, results in errors of less than 5% in the thermal parts of the thermodynamic functions. Then we explicitly display the forms of the remaining terms in the EOS, commenting on the use of experiment and electronic structure theory to evaluate them. We also construct an EOS for Aluminum and compare the resulting Hugoniot with data up to 5 Mbar, both to illustrate our method and to see whether the approximation of neglecting anharmonicity et al. remains viable to such high pressures. We find a level of agreement with experiment that is consistent with the low-pressure results.Comment: Minor revisions for consistency with published versio

A prominent β-hairpin structure in the winged-helix domain of RECQ1 is required for DNA unwinding and oligomer formation

RecQ helicases have attracted considerable interest in recent years due to their role in the suppression of genome instability and human diseases. These atypical helicases exert their function by resolving a number of highly specific DNA structures. The crystal structure of a truncated catalytic core of the human RECQ1 helicase (RECQ149–616) shows a prominent β-hairpin, with an aromatic residue (Y564) at the tip, located in the C-terminal winged-helix domain. Here, we show that the β-hairpin is required for the DNA unwinding and Holliday junction (HJ) resolution activity of full-length RECQ1, confirming that it represents an important determinant for the distinct substrate specificity of the five human RecQ helicases. In addition, we found that the β-hairpin is required for dimer formation in RECQ149–616 and tetramer formation in full-length RECQ1. We confirmed the presence of stable RECQ149–616 dimers in solution and demonstrated that dimer formation favours DNA unwinding; even though RECQ1 monomers are still active. Tetramers are instead necessary for more specialized activities such as HJ resolution and strand annealing. Interestingly, two independent protein–protein contacts are required for tetramer formation, one involves the β-hairpin and the other the N-terminus of RECQ1, suggesting a non-hierarchical mechanism of tetramer assembly