Efecto de los parámetros del proceso de extracción por prensado sobre el rendimiento y la calidad de aceite de Pistacho

Pistachio nuts have high economical and nutritional value, mostly due to their elevated oil con­tent (50%), which is composed mainly of oleic and linoleic fatty acids. Box-Behnken experimental designs were performed to optimize the oil extraction by response surface analysis. The independent variables measured were seed moisture content (SMC), restriction die (RD), screw press speed (PS) and pressing temperature (PT), while the response variables considered were oil recovery (OR), fine solid contents in the oil (FSC), oil remain­ing in the cake (OC) and parameters related to oil quality (free fatty acid composition (FFAC, mg KOH/g oil), peroxide value (PV, meq O2/kg oil), K232, K270 and pigment contents, mg/kg oil). Given that the chemical quality of pistachio nut oil pressed under different conditions was not affected, the process response was optimized in order to maximize OR under two pressing temperatures. Therefore, at 75 °C, pistachio oil extraction showed a maximum OR (79.61 g/100 g oil) at 8% SMC, 4 mm RD and 20 rpm SP; while, under cold-pressed conditions, the maximum OR (65.97 g/100 g oil) was achieved at 10% SMC, 4mm RD and 20 rpm SP. It is important to highlight that OR values were higher than the results reported previously and the chemical quality parameters from both oils were in the range of Codex standards for virgin (non-refined) oils (FFAC < 0.31 and PV < 0.33).Los frutos de pistacho son altamente nutritivos, principalmente debido a su contenido de aceite (50%), compuesto principalmente por ácidos grasos mono y di-insaturados. Con la finalidad de conocer las condiciones de proceso adecuadas que permitan maximizar la cantidad de aceite extraído preservando la calidad química del mismo se utilizaron dos diseños experimentales de Box-Behnken. Las variables independientes analizadas fueron la humedad de la semilla (HS), el diámetro de reducción (DR), la velocidad y temperatura de prensado (VP y TP, respectivamente), mientras que las variables de respuesta fueron el rendimiento en aceite (RA), el contenido de sólidos finos en el aceite (CFA), el aceite remanente en torta (AT) y parámetros relacionados con la calidad (composición en ácidos grasos libres (CAGL, mg KOH/g aceite), índice de peróxido (IP, meqO2/kg aceite), K232, K270 y pigmentos (mg/kg aceite)). La calidad química de los aceites obtenidos no mostró daño oxidativo y/o hidrolítico significativo bajo las diferentes condiciones del proceso (IP< 0.33 y CAGL< 0.31, respectivamente), por lo tanto, la respuesta se optimizó para maximizar RA a dos TP, 75 y 40 °C. El rendimiento en aceite se maximizó ajustando HS (8% ó 10% b.h.), DR (4 mm), VP (20 rpm) a ambas temperaturas, alcanzando extracciones de aceite de 79.61% y 65.97%, respectivament

High-resolution x-ray study of the nematic - smectic-A and smectic-A - smectic-C transitions in 8barS5-aerosil gels

The effects of dispersed aerosil nanoparticles on two of the phase transitions of the thermotropic liquid crystal material 4-n-pentylphenylthiol-4'-n-octyloxybenzoate 8barS5 have been studied using high-resolution x-ray diffraction techniques. The aerosils hydrogen bond together to form a gel which imposes a weak quenched disorder on the liquid crystal. The smectic-A fluctuations are well characterized by a two-component line shape representing thermal and random-field contributions. An elaboration on this line shape is required to describe the fluctuations in the smectic-C phase; specifically the effect of the tilt on the wave-vector dependence of the thermal fluctuations must be explicitly taken into account. Both the magnitude and the temperature dependence of the smectic-C tilt order parameter are observed to be unaffected by the disorder. This may be a consequence of the large bare smectic correlation length in the direction of modulation for this transition. These results show that the understanding developed for the nematic to smectic-A transition for octylcyanobiphenyl (8CB) and octyloxycyanobiphenyl (8OCB) liquid crystals with quenched disorder can be extended to quite different materials and transitions.Comment: 7 pages, 8 figure

Morphological stabilization and KPZ scaling by electrochemically induced co-deposition of nanostructured NiW alloy films

We have assessed the stabilizing role that induced co-deposition has in the growth of nanostructured NiW alloy films by electrodeposition on polished steel substrates, under pulsed galvanostatic conditions. We have compared the kinetic roughening properties of NiW films with those of Ni films deposited under the same conditions, as assessed by Atomic Force Microscopy. The surface morphologies of both systems are super-rough at short times, but differ at long times: while a cauliflower-like structure dominates for Ni, the surfaces of NiW films display a nodular morphology consistent with more stable, conformal growth, whose height fluctuations are in the Kardar-ParisiZhang universality class of rough two-dimensional interfaces. These differences are explained by the mechanisms controlling surface growth in each case: mass transport through the electrolyte (Ni) and attachment of the incoming species to the growing interface (NiW). Thus, the long-time conformal growth regime is characteristic of electrochemical induced co-deposition under current conditions in which surface kinetics is hindered due to a complex reaction mechanism. These results agree with a theoretical model of surface growth in diffusion-limited systems, in which the key parameter is the relative importance of mass transport with respect to the kinetics of the attachment reaction.We acknowledge financial support from ANPCyT (PICT 2012-1808), CONICET (PIP 0671) and Universidad Nacional de La Plata (11X760) as well as from MINECO/FEDER (Spain/UE) Grants MAT2014-54231-C4-1-P, FIS2015-66020-C2-1-P and MAT2014-52405-C2-2-R, as well as by Comunidad Autónoma de Madrid (Spain) Grant NANOAVANSENS S2013/MIT-3029. M.E.V. is member of the research career of CICPB

Morphological stabilization and KPZ scaling by electrochemically induced co-deposition of nanostructured NiW alloy films

We have assessed the stabilizing role that induced co-deposition has in the growth of nanostructured NiW alloy films by electrodeposition on polished steel substrates, under pulsed galvanostatic conditions. We have compared the kinetic roughening properties of NiW films with those of Ni films deposited under the same conditions, as assessed by Atomic Force Microscopy. The surface morphologies of both systems are super-rough at short times, but differ at long times: while a cauliflower-like structure dominates for Ni, the surfaces of NiW films display a nodular morphology consistent with more stable, conformal growth, whose height fluctuations are in the Kardar-Parisi- Zhang universality class of rough two-dimensional interfaces. These differences are explained by the mechanisms controlling surface growth in each case: mass transport through the electrolyte (Ni) and attachment of the incoming species to the growing interface (NiW). Thus, the long-time conformal growth regime is characteristic of electrochemical induced co-deposition under current conditions in which surface kinetics is hindered due to a complex reaction mechanism. These results agree with a theoretical model of surface growth in diffusion-limited systems, in which the key parameter is the relative importance of mass transport with respect to the kinetics of the attachment reaction.Facultad de Ciencias Exacta

Shear induced instabilities in layered liquids

Motivated by the experimentally observed shear-induced destabilization and reorientation of smectic A like systems, we consider an extended formulation of smectic A hydrodynamics. We include both, the smectic layering (via the layer displacement u and the layer normal p) and the director n of the underlying nematic order in our macroscopic hydrodynamic description and allow both directions to differ in non equilibrium situations. In an homeotropically aligned sample the nematic director does couple to an applied simple shear, whereas the smectic layering stays unchanged. This difference leads to a finite (but usually small) angle between n and p, which we find to be equivalent to an effective dilatation of the layers. This effective dilatation leads, above a certain threshold, to an undulation instability of the layers. We generalize our earlier approach [Rheol. Acta, vol.39(3), 15] and include the cross couplings with the velocity field and the order parameters for orientational and positional order and show how the order parameters interact with the undulation instability. We explore the influence of various material parameters on the instability. Comparing our results to recent experiments and molecular dynamic simulations, we find a good qualitative agreement.Comment: 15 pages, 12 figures, accepted for publication in PR

Modulated structures in electroconvection in nematic liquid crystals

Motivated by experiments in electroconvection in nematic liquid crystals with homeotropic alignment we study the coupled amplitude equations describing the formation of a stationary roll pattern in the presence of a weakly-damped mode that breaks isotropy. The equations can be generalized to describe the planarly aligned case if the orienting effect of the boundaries is small, which can be achieved by a destabilizing magnetic field. The slow mode represents the in-plane director at the center of the cell. The simplest uniform states are normal rolls which may undergo a pitchfork bifurcation to abnormal rolls with a misaligned in-plane director.We present a new class of defect-free solutions with spatial modulations perpendicular to the rolls. In a parameter range where the zig-zag instability is not relevant these solutions are stable attractors, as observed in experiments. We also present two-dimensionally modulated states with and without defects which result from the destabilization of the one-dimensionally modulated structures. Finally, for no (or very small) damping, and away from the rotationally symmetric case, we find static chevrons made up of a periodic arrangement of defect chains (or bands of defects) separating homogeneous regions of oblique rolls with very small amplitude. These states may provide a model for a class of poorly understood stationary structures observed in various highly-conducting materials ("prechevrons" or "broad domains").Comment: 13 pages, 13 figure

Standard and Embedded Solitons in Nematic Optical Fibers

A model for a non-Kerr cylindrical nematic fiber is presented. We use the multiple scales method to show the possibility of constructing different kinds of wavepackets of transverse magnetic (TM) modes propagating through the fiber. This procedure allows us to generate different hierarchies of nonlinear partial differential equations (PDEs) which describe the propagation of optical pulses along the fiber. We go beyond the usual weakly nonlinear limit of a Kerr medium and derive an extended Nonlinear Schrodinger equation (eNLS) with a third order derivative nonlinearity, governing the dynamics for the amplitude of the wavepacket. In this derivation the dispersion, self-focussing and diffraction in the nematic are taken into account. Although the resulting nonlinear $PDE$ may be reduced to the modified Korteweg de Vries equation (mKdV), it also has additional complex solutions which include two-parameter families of bright and dark complex solitons. We show analytically that under certain conditions, the bright solitons are actually double embedded solitons. We explain why these solitons do not radiate at all, even though their wavenumbers are contained in the linear spectrum of the system. Finally, we close the paper by making comments on the advantages as well as the limitations of our approach, and on further generalizations of the model and method presented.Comment: "Physical Review E, in press

Caracterización física y obtención de parámetros de fluidización de germen de trigo

El germen de trigo es el embrión del grano de trigo, presenta un elevado contenido de tocoferoles y proteínas y ácidos grasos y proteínas de alta calidad. A su vez, contiene enzimas con elevada actividad que limitan su periodo de aptitud a unos pocos días. El objetivo del presente trabajo fue caracterizar físicamente las partículas de germen de trigo para determinar los parámetros de diseño para un proceso de fluidificación térmica con aire. Los ejes principales de las partículas fueron determinados mediante análisis de imágenes y sus dimensiones y parámetros geométricos fueron calculados. La densidad de lecho fijo y la porosidad del lecho fueron determinadas. Los estudios fluido-dinámicos nos permitieron determinar los coeficientes, laminar (277,46±17,48) y turbulento (7,79±0,69) de la ecuación de Ergun y la velocidad de mínima fluidificación (0,35±0,02 m/s).Wheat germ is the embryo of de wheat seed, it contains a high tocopherol and protein content, and high quality proteins and fatty acids. Also, wheat germ has a considerable enzymatic activity that limits its shelf life. The aims of the study were to physically characterize wheat germ particles to determine their design parameters of thermal fluidization process with air. The principal axes of the particle were measured by image analysis, and their dimensions and geometric parameters were calculated. The fixed bed density and the void fraction were measured. The fluid-dynamic studies allowed us to determine laminar (277.46±17.48) and turbulent (7.79±0.69) coefficients of the Ergun equation and the minimum fluidization velocity (0.35±0.02 m/s).Centro de Investigación y Desarrollo en Criotecnología de Alimento

Three-dimensional pattern formation, multiple homogeneous soft modes, and nonlinear dielectric electroconvection

Patterns forming spontaneously in extended, three-dimensional, dissipative systems are likely to excite several homogeneous soft modes ($\approx$ hydrodynamic modes) of the underlying physical system, much more than quasi one- and two-dimensional patterns are. The reason is the lack of damping boundaries. This paper compares two analytic techniques to derive the patten dynamics from hydrodynamics, which are usually equivalent but lead to different results when applied to multiple homogeneous soft modes. Dielectric electroconvection in nematic liquid crystals is introduced as a model for three-dimensional pattern formation. The 3D pattern dynamics including soft modes are derived. For slabs of large but finite thickness the description is reduced further to a two-dimensional one. It is argued that the range of validity of 2D descriptions is limited to a very small region above threshold. The transition from 2D to 3D pattern dynamics is discussed. Experimentally testable predictions for the stable range of ideal patterns and the electric Nusselt numbers are made. For most results analytic approximations in terms of material parameters are given.Comment: 29 pages, 2 figure

Morphological stabilization and KPZ scaling by electrochemically induced co-deposition of nanostructured NiW alloy films

We have assessed the stabilizing role that induced co-deposition has in the growth of nanostructured NiW alloy films by electrodeposition on polished steel substrates, under pulsed galvanostatic conditions. We have compared the kinetic roughening properties of NiW films with those of Ni films deposited under the same conditions, as assessed by Atomic Force Microscopy. The surface morphologies of both systems are super-rough at short times, but differ at long times: while a cauliflower-like structure dominates for Ni, the surfaces of NiW films display a nodular morphology consistent with more stable, conformal growth, whose height fluctuations are in the Kardar-Parisi- Zhang universality class of rough two-dimensional interfaces. These differences are explained by the mechanisms controlling surface growth in each case: mass transport through the electrolyte (Ni) and attachment of the incoming species to the growing interface (NiW). Thus, the long-time conformal growth regime is characteristic of electrochemical induced co-deposition under current conditions in which surface kinetics is hindered due to a complex reaction mechanism. These results agree with a theoretical model of surface growth in diffusion-limited systems, in which the key parameter is the relative importance of mass transport with respect to the kinetics of the attachment reaction.Facultad de Ciencias Exacta