1,113 research outputs found
Effects of unsteady free stream velocity and free stream turbulence on stagnation point heat transfer
The combined effects of transient free stream velocity and free stream turbulence on heat transfer at a stagnation point over a cylinder situated in a crossflow are studied. An eddy diffusivity model was formulated and the governing momentum and energy equations are integrated by means of the steepest descent method. The numerical results for the wall shear stress and heat transfer rate are correlated by a turbulence parameter. The wall friction and heat transfer rate increase with increasing free stream turbulence intensity
Comparison of predicted and measured elastohydrodynamic film thickness in a 20-millimeter-bore ball bearing
Elastohydrodynamic film thicknesses were measured for a 20-mm bore ball bearing using the capacitance technique. The bearing was thrust loaded to 90, 445, and 778 N (20, 100, and 175 lb). The corresponding maximum contact stress on the inner race was 1.28, 2.09, and 2.45 GPa (185 000, 303,000, and 356, 000 psi). Test speeds ranged from 400 to 15,000 rpm. Measurements were taken with four different lubricants: (1) synthetic paraffinic; (2) synthetic paraffinic with additives; (3) synthetic type II aircraft oil; and (4) synthetic cycloaliphatic hydrocarbon traction fluid. The test bearing was mist lubricated. Test temperatures were 27, 65, and 121 C (80, 150, and 250 F). The measured results for the various test parameters were compared to theoretical predictions from computer programs. Also the data were plotted on dimensionless coordinates and compared to several classical isothermal theories
Navier-Stokes analysis of turbomachinery blade external heat transfer
The two-dimensional, compressible, thin-layer Navier-Stokes and energy equations were solved numerically to obtain heat transfer rates on turbomachinery blades. The Baldwin-Lomax algebraic model and the q-omega low Reynolds number two-equation model were used for modeling of turbulence. For the numerical solution of the governing equations a four-stage Runge-Kutta solver was employed. The turbulence model equations were solved using an implicit scheme. Numerical solutions are presented for two-dimensional flow within two vane cascades. The heat transfer results and the pressure distributions were compared with published experimental data. The agreement between the numerical calculations and the experimental values were found to be generally favorable. The position of transition from laminar to turbulent flow was also predicted accurately
Antennal Phenotype of Triatoma dimidiata Populations and Its Relationship with Species of phyllosoma and protracta Complexes
Triatoma dimidiata (Latreille 1811) Reduviidae Triatominae is the main vector of Chagas disease in several countries of Latin America. As for other vector species, the characterization of T. dimidiata subpopulations within particular geographical regions or occupying different habitats could help in better planning of vector control actions. A Þrst objective in this study was to evaluate the antennal phenotype as a phenetic marker to characterize populations of T. dimidiata collected in different geographic areas and domestic and sylvatic habitats. A second objective was to evaluate the phenetic relationships of T. dimidiata with other species of the phyllosoma complex: longipennis, pallidipennis, and phyllosoma. The antennal sensilla of T. dimidiata specimens collected in Mexico, Central America, and Colombia were analyzed and compared with the antennal sensilla of T. longipennis, T. pallidipennis, and T. phyllosoma. T. barberi was used as an outgroup in the analysis. For each specimen, the ventral side of the three distal segments of the antennae was drawn, identifying and counting four types of sensilla. In T. dimidiata, univariate and multivariate analysis showed differences between sexes, among populations collected in different habitats within the same region, and among populations collected in different geographic regions. Two types of antennal sensilla showed a latitudinal variation. Domestic specimens showed intermediate characteristics of the antennal phenotype, between sylvatic cave- and sylvatic forest-collected specimens. The antennal phenotypes show high similarities among T. pallidipennis, T. phyllosoma, and T. longipennis, with a better differentiation of T. pallidipennis. T. dimidiata is separated from the other members of the complex by a similar distance to T. barberi, of the protracta complex.Fil: Catala, Silvia Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de Catamarca. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Secretaría de Industria y Minería. Servicio Geológico Minero Argentino. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Provincia de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja; ArgentinaFil: Sachetto, C.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de Catamarca. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Secretaría de Industria y Minería. Servicio Geológico Minero Argentino. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Provincia de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja; ArgentinaFil: Moreno, Mariana Laura. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de Catamarca. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Secretaría de Industria y Minería. Servicio Geológico Minero Argentino. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Provincia de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja; ArgentinaFil: Rosales, R.. Universidad de San Carlos; GuatemalaFil: Salazar Schettino, P. M.. Universidad Nacional Autónoma de México; MéxicoFil: Gorla, David Eladio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Universidad Nacional de Catamarca. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Secretaría de Industria y Minería. Servicio Geológico Minero Argentino. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja. - Provincia de La Rioja. Centro Regional de Investigaciones Científicas y Transferencia Tecnológica de La Rioja; Argentin
Chemical reaction on heat and mass transfer flow past a vertical cylinder embedded in non-Darcy porous medium
An unsteady two dimensional free convection flow of a viscous incompressible fluid past an impulsively started semi-infinite vertical cylinder adjacent to a non-Darcian porous media in the presence of chemical reaction of first order is investigated. The governing boundary layer equations are formulated with appropriate boundary conditions and are solved using an implicit finite-difference method of Crank-Nicholson type. The problem is shown to be controlled by seven thermophysical and hydrodynamic dimensionless parameters, namely thermal Grashof number (Gr), species Grashof number (Gm), Darcy
number (Da i.e. permeability parameter), Forchheimer number (Fs i.e. second order inertial porous parameter), Prandtl number (Pr), Schmidt number (Sc) and chemical
reaction parameter (K1).The effects of thermophysical parameter on the transient dimensionless velocity, temperature and concentration are illustrated graphically. Also, the effects of the various thermo-physical parameters on the Skin friction, Nusselt number and Sherwood number are presented and discussed. This model finds applications in polymer production, manufacturing of ceramics or glassware and food processing
Thermal Ignition of a Combustible over an Inclined Hot Plate
In this study, the ignition characteristics and the flow properties of the mixed convection flow are presented. Detailed formulations of the forced, natural and mixed convection problems have been discussed. In order to avoid inconvenient switch between the forced and natural convection we introduce a continuous transformation in the mixed convection. We make a comparison between these situations which reveal a good agreement. For mixed convection flow, the ignition distance is explicitly expressed as a function of the Prandtl number, reaction parameter and wall temperature. It has been observed that owing to the increase of the aforesaid parameters, the thermal ignition distance is reduced. Numerical results are illustrated for velocity, temperature, and concentration for different physical parameters. Furthermore, the development of combustion is presented by using streamlines, isotherms and isolines of fuel and oxidizer
A criterion for separating process calculi
We introduce a new criterion, replacement freeness, to discern the relative
expressiveness of process calculi. Intuitively, a calculus is strongly
replacement free if replacing, within an enclosing context, a process that
cannot perform any visible action by an arbitrary process never inhibits the
capability of the resulting process to perform a visible action. We prove that
there exists no compositional and interaction sensitive encoding of a not
strongly replacement free calculus into any strongly replacement free one. We
then define a weaker version of replacement freeness, by only considering
replacement of closed processes, and prove that, if we additionally require the
encoding to preserve name independence, it is not even possible to encode a non
replacement free calculus into a weakly replacement free one. As a consequence
of our encodability results, we get that many calculi equipped with priority
are not replacement free and hence are not encodable into mainstream calculi
like CCS and pi-calculus, that instead are strongly replacement free. We also
prove that variants of pi-calculus with match among names, pattern matching or
polyadic synchronization are only weakly replacement free, hence they are
separated both from process calculi with priority and from mainstream calculi.Comment: In Proceedings EXPRESS'10, arXiv:1011.601
Biot number effect on MHD flow and heat transfer of nanofluid with suspended dust particles in the presence of nonlinear thermal radiation and non-uniform heat source/sink
This paper considers the problem of steady, boundary layer flow and heat transfer of dusty nanofluid over a stretching surface in the presence of non-uniform heat source/sink and nonlinear thermal radiation with Biot number effect. The base fluid (water) is considered with silver (Ag) nanoparticles along with suspended dust particles. The governing equations in partial form are reduced to a system of non-linear ordinary differential equations using suitable similarity transformations. An effective Runge–Kutta–Fehlberg fourth-fifth order method along with shooting technique is used for the solution. The effects of flow parameters such as nanofluid interaction parameter, magnetic parameter, solid volume fraction parameter, Prandtl number, heat source/sink parameters, radiation parameter, temperature ratio parameter and Biot number on the flow field and heat-transfer characteristics were obtained and are tabulated. Useful discussions were carried out with the help of plotted graphs and tables. Under the limiting cases, comparison with the existing results was made and found to be in good agreement
Robustness of a bisimulation-type faster-than preorder
TACS is an extension of CCS where upper time bounds for delays can be
specified. Luettgen and Vogler defined three variants of bismulation-type
faster-than relations and showed that they all three lead to the same preorder,
demonstrating the robustness of their approach. In the present paper, the
operational semantics of TACS is extended; it is shown that two of the variants
still give the same preorder as before, underlining robustness. An explanation
is given why this result fails for the third variant. It is also shown that
another variant, which mixes old and new operational semantics, can lead to
smaller relations that prove the same preorder.Comment: Express Worksho
Semi-regular sequences and other random systems of equations
The security of multivariate cryptosystems and digital signature schemes
relies on the hardness of solving a system of polynomial equations over a
finite field. Polynomial system solving is also currently a bottleneck of
index-calculus algorithms to solve the elliptic and hyperelliptic curve
discrete logarithm problem. The complexity of solving a system of polynomial
equations is closely related to the cost of computing Groebner bases, since
computing the solutions of a polynomial system can be reduced to finding a
lexicographic Groebner basis for the ideal generated by the equations. Several
algorithms for computing such bases exist: We consider those based on repeated
Gaussian elimination of Macaulay matrices. In this paper, we analyze the case
of random systems, where random systems means either semi-regular systems, or
quadratic systems in n variables which contain a regular sequence of n
polynomials. We provide explicit formulae for bounds on the solving degree of
semi-regular systems with m > n equations in n variables, for equations of
arbitrary degrees for m = n+1, and for any m for systems of quadratic or cubic
polynomials. In the appendix, we provide a table of bounds for the solving
degree of semi-regular systems of m = n + k quadratic equations in n variables
for 2 <= k; n <= 100 and online we provide the values of the bounds for 2 <= k;
n <= 500. For quadratic systems which contain a regular sequence of n
polynomials, we argue that the Eisenbud-Green-Harris Conjecture, if true,
provides a sharp bound for their solving degree, which we compute explicitly.Comment: 27 pages, 4 table
- …