Temperature Compensated Ultrasonic Ranging and Location finder for Blind Person

This paper is intended to provide a theoretical model of object detection and real time assistance via Global Positioning System(GPS).This paper aims at the development of an Electronic Travelling Aid (ETA) kit to help the blind people to find obstacle free path. This ETA is fixed to the stick of the blind people. When the object is detected near to the blinds’ stick it alerts them with the help of vibratory circuit. Ultrasonic sensors are used to evaluate distance of the objects around the blind person to guide the user towards the secure and available path. Output is in the form of vibrations which the blind person can easily recognize. The hardware of entire system contains ARM7 (LPC2138), temperature sensor, ultrasonic sensors and mobile vibrator, Global positioning system (GPS) module and Global System for Mobile (GSM) module. It contains temperature compensation method to reduce the error in measurement of distance using ultrasonic sensors. DOI: 10.17762/ijritcc2321-8169.15068

RESOLVEMENT OF POWER QUALITY PROBLEMS BY UNIFIED POWER QUALITY CONDITIONER (UPQC)

In this project presents a Design of a Unified Power Quality conditioner (UPQC) connected to three phase four wire system (3P4W). The neutral of series transformer used in the fourth wire for the 3P4W system. The neutral current that may flow toward transformer neutral point is compensated by using a four-leg voltage source inverter topology for shunt part. The series transformer neutral will be at virtual zero potential during all operating conditions. In this simulation we observe the power quality problems such as unbalanced voltage and current, harmonics by connecting non linear load to 3P4W system with Unified Power Quality conditioner. A new control strategy such as unit vector template is used to design the series APF to balance the unbalanced current present in the load currents by expanding the concept of single phase P-Q theory

Seasonal variations of protein in the ovary of fish Channa gachua

          The present study was carried out in the breeding seasons from 2004 to 2006. The ovary of fresh water fish Channa gachua was analyzed for its protein content during period of four different phases of reproductive cycle, in Channa gachua i.e. preparatory, pre-spawning, and post-spawning. Protein content found in preparatory phase was non significant, and significantly increased from pre-spawning to spawning and declined in post-spawning (mg/g wet weight of ovary)

A low-frequency study of recently identified double-double radio galaxies

In order to understand the possible mechanisms of recurrent jet activity in radio galaxies and quasars, which are still unclear, we have identified such sources with a large range of linear sizes (220 $-$ 917 kpc), and hence time scales of episodic activity. Here we present high-sensitivity 607-MHz Giant Metrewave Radio Telescope (GMRT) images of 21 possible double-double radio galaxies (DDRGs) identified from the FIRST survey to confirm their episodic nature. These GMRT observations show that none of the inner compact components suspected to be hot-spots of the inner doubles are cores having a flat radio spectrum, confirming the episodic nature of these radio sources. We have indentified a new DDRG with a candidate quasar, and have estimated the upper spectral age limits for eight sources which showed marginal evidence of steepening at higher frequencies. The estimated age limits (11 $-$ 52 Myr) are smaller than those of the large-sized ($\sim$ 1 Mpc) DDRGs.Comment: Accepted for publication in MNRAS. 14 pages, 7 figure

Performance Evaluation of Image Steganography using Hybrid Technique in Frequency Domain

Protection of digital multimedia content has become an increasingly important issue for content owners and service providers. The major methodology for protection of some digital content is- Steganography. Image Steganography is a process where information such as name of the creator, status, recipient, etc. is stored in the form of an image which is embedded into the host image in such a way that it will remain invisible or undetectable to a normal person. Only the intended recipient would be able to detect and remove the secret image. There are three main mutually conflicting properties of information hiding schemes: Imperceptibility, Robustness and Capacity. This paper measures the imperceptibility and robustness of the proposed system in terms of two parameters- PSNR and NC respectively. Now, while transmitting the image having some secret information embedded in the cover image, some attacks may arise on it which would degrade the quality of the secret image while extracting it. The technique is again tested against different attacks with varying attack intensities

Churn Identification and Prediction from a Large-Scale Telecommunication Dataset Using NLP

The identification of customer churn is a major issue for large telecom businesses. In order to manage the data of current customers as well as acquire and manage new customers, every day, a substantial volume of data gets generated. Therefore, it's crucial to identify the causes of client churn so that the appropriate steps can be taken to lower it. Numerous researchers have already discussed their efforts to combine static and dynamic approaches in order to reduce churn in big data sets, but these systems still have many issues when it comes to actually identifying churn. In this paper, we suggested two methods, the first of which is churn identification and using Natural Language Processing (NLP) methods and machine learning techniques, we make predictions based on a vast telecommunication data set. The NLP process involves data pre-processing, normalization, feature extraction, and feature selection. For feature extraction, we employ unique techniques like TF-IDF, Stanford NLP, and occurrence correlation methods, have been suggested. Throughout the lesson, a machine learning classification algorithm is used for training and testing. Finally, the system employs a variety of cross validation techniques and training and evaluating Machine learning algorithms. The experimental analysis shows the system's efficacy and accuracy

A Review and an Approach of Water Pollution Indication using Arduino Uno

Drinking water is critical for the wellbeing and prosperity of all people and creatures because water play major role in all living beings and most danger disease are caused by water and it is our duty to provide clean and safe water and also to monitor the pollution level in water it is additionally essential for farming utilization for good product yielding and natural way of life linkage wellbeing issues. With over 200 children dying per day due to unsafe water, drinking water crisis is ranked one on the global risk by World Economic Forum, 2015. This paper presents an easy and comprehensive methodology is microcontroller sensor based system continuous observing and pollution recognition for both drinking and non-drinking water dissemination frameworks and in addition for customer locales

A Review and an Approach of Flying Electric Generators as Alternate Source of Energy

This paper presents a review of flying electric generators which are used to harness kinetic energy in powerful, persistent high altitude winds. It has been found that FEGs could give individual output of up to 40MW. It is a lighter wind turbine that rotates about a horizontal axis in response to wind, generating electrical energy. This electrical energy is transferred down for immediate use, or to a set of batteries for later use, or to the power grid. This paper presents the critical analysis of existing literature which is relevant to flying electric generator Though, the literature consists of a lot many research contributions, but, here, we have analyzed some important research and review papers. The existing approaches are categorized based on the basic concepts involved in the mechanisms. The emphasis is on the concepts used by the concerned authors, the database used for experimentations and the performance evaluation parameters. Their claims are also highlighted. Finally, the findings are summarized related to the studied and analyzed research papers. Paper concludes with the motivation behind identified problem

Study of effects of donepezil and aspirin on working memory in rats using electroconvulsive shock model

Background: Memory is the most common cognitive ability lost with dementia commonly seen in Alzheimer’s disease (AD). Donepezil was the first cholinesterase inhibitor to be licensed in UK for AD. There is preliminary evidence that aspirin decreases the risk and delays the onset of AD. Low dose aspirin users had numerically lower prevalence of Alzheimer’s dementia and had better cognitive function than non-users.Methods: Retention of conditioned avoidance response (CAR) was assessed by using repeated electroconvulsive shocks (ECS) in rats. Rats were divided into five groups: control (pretreated with distilled water), ECS (150 V, 50 Hz, with intensity of 210 mA for 0.5 sec) pretreated, combined aspirin (6.75 mg/kg) and pretreated ECS, combined donepezil (0.32 mg/kg) and pretreated ECS, combined aspirin, donepezil and pretreated ECS groups. Data were analyzed using the Chi-square test and ANOVA.Results: Findings show that administration of ECS daily for 8 days results in transient amnesia and disruption of retention of CAR. Aspirin and donepezil administration significantly increased the retention of CAR in comparison to ECS. However, aspirin failed to show an increase in the retention of CAR as compared to donepezil. The combination of the two drugs showed statistically significant increase in the retention of CAR than either of these drugs given alone.Conclusion: Neuroinflammation plays an important role in the pathophysiology of neurodegenerative disorder like AD. Combination of aspirin with donepezil increased the nootropic and neuroprotective effect of aspirin and thus may hold great clinical significance in such disorders

Automatic Overhead Water Tank Cleaning System: A Review and an Approach

Aim of this paper is to develop a mechanical system for cleaning domestic cylindrical water tank. The mechanical system includes two main mechanisms which are rack and pinion gear mechanism and reciprocating four bar linkage mechanism. The rack and pinion arrangement is used to move whole mechanical system up and down for cleaning the cylindrical tank. The rack is fixed on the motor and the four-bar mechanism is attached to the motor shaft. PVC brushes are attached to the ends of the four-bar linkage. Four bar linkage is made in such a way that it can be adjusted according to inside diameter of the tank. When the motor is started the linkage rotates and with the help of brushes, cleaning of wall and base of tank takes place. The purpose of this project is to reduce the human efforts and to avoid the chemical influence on health of person entering the tank for cleaning. In this modern world, cleaning of overhead tanks manually is a tedious job. To overcome this we have aimed at tackling the disadvantages of cleaning overhead tanks, so an automatic system overhead tank cleaning is designed to provide high safety, high efficiency, less time for cleaning and to avoid environmental pollution problems. Purpose of this paper is to clean domestic cylindrical water tank with the help of mechatronics system. The mechatronics system consists of a grooved gear rod attached to two arms with brushes at ends. The two arms are connected to the gear rod by nut. By rotating the gear rod, the up and down motion of the two arms is achieved. The gear rod is rotated with the help of a D.C gear motor. The main grooved shaft is powered by an A.C motor. The motor and the shaft are connected by a rubber belt. The clockwise rotation of the main shaft will make the arms move and vice versa. The whole operation is controlled by a circuit consisting of relay switches, buttons, and PIC microcontroller. The number of times for the operation to repeat can be fed into the circuit. The achievement of this project is reduction of cost and manual labour because there will be harmful diseases for the person who will go inside and it will affect the health as well as the other human being who consumes water from the tank