Pre-Excitation Studies for Rubidium-Plasma Generation

The key element in the Proton-Driven-Plasma-Wake-Field-Accelerator (AWAKE) project is the generation of highly uniform plasma from Rubidium vapor. The standard way to achieve full ionization is to use high power laser which can assure the over-barrier-ionization (OBI) along the 10 meters long active region. The Wigner-team in Budapest is investigating an alternative way of uniform plasma generation. The proposed Resonance Enhanced Multi Photon Ionization (REMPI) scheme probably can be realized by much less laser power. In the following the resonant pre-excitations of the Rb atoms are investigated, theoretically and the status report about the preparatory work on the experiment are presented.Comment: 8 pages, 6 figures, submitted to Nucl. Inst. and Meth. in Phys. Res.

Experimental study of extended timescale dynamics of a plasma wakefield driven by a self-modulated proton bunch

Plasma wakefield dynamics over timescales up to 800 ps, approximately 100 plasma periods, are studied experimentally at the Advanced Wakefield Experiment (AWAKE). The development of the longitudinal wakefield amplitude driven by a self-modulated proton bunch is measured using the external injection of witness electrons that sample the fields. In simulation, resonant excitation of the wakefield causes plasma electron trajectory crossing, resulting in the development of a potential outside the plasma boundary as electrons are transversely ejected. Trends consistent with the presence of this potential are experimentally measured and their dependence on wakefield amplitude are studied via seed laser timing scans and electron injection delay scan

Simulation and experimental study of proton bunch self-modulation in plasma with linear density gradients

We present numerical simulations and experimental results of the self-modulation of a long proton bunch in a plasma with linear density gradients along the beam path. Simulation results agree with the experimental results reported [F. Braunmller, T. Nechaeva et al. (AWAKE Collaboration), Phys. Rev. Lett. 125, 264801 (2020)PRLTAO0031-900710.1103/PhysRevLett.125.264801]: with negative gradients, the charge of the modulated bunch is lower than with positive gradients. In addition, the bunch modulation frequency varies with gradient. Simulation results show that dephasing of the wakefields with respect to the relativistic protons along the plasma is the main cause for the loss of charge. The study of the modulation frequency reveals details about the evolution of the self-modulation process along the plasma. In particular for negative gradients, the modulation frequency across time-resolved images of the bunch indicates the position along the plasma where protons leave the wakefields. Simulations and experimental results are in excellent agreement

Simulation and experimental study of proton bunch self-modulation in plasma with linear density gradients

We present numerical simulations and experimental results of the self-modulation of a long proton bunch in a plasma with linear density gradients along the beam path. Simulation results agree with the experimental results reported [F. Braunmller, T. Nechaeva et al. (AWAKE Collaboration), Phys. Rev. Lett. 125, 264801 (2020)]: with negative gradients, the charge of the modulated bunch is lower than with positive gradients. In addition, the bunch modulation frequency varies with gradient. Simulation results show that dephasing of the wakefields with respect to the relativistic protons along the plasma is the main cause for the loss of charge. The study of the modulation frequency reveals details about the evolution of the self-modulation process along the plasma. In particular for negative gradients, the modulation frequency across time-resolved images of the bunch indicates the position along the plasma where protons leave the wakefields. Simulations and experimental results are in excellent agreement

Stabilization and time resolved measurement of the frequency evolution of a modulated diode laser for chirped pulse generation

We have developed experimental methods for the generation of chirped laser pulses of controlled frequency evolution in the nanosecond pulse length range for coherent atomic interaction studies. The pulses are sliced from the radiation of a cw external cavity diode laser while its drive current, and consequently its frequency, are sinusoidally modulated. By the proper choice of the modulation parameters, as well as of the timing of pulse slicing, we can produce a wide variety of frequency sweep ranges during the pulse. In order to obtain the required frequency chirp, we need to stabilize the center frequency of the modulated laser and to measure the resulting frequency evolution with appropriate temporal resolution. These tasks have been solved by creating a beat signal with a reference laser locked to an atomic transition frequency. The beat signal is then analyzed, as well as its spectral sideband peaks are fed back to the electronics of the frequency stabilization of the modulated laser. This method is simple and it has the possibility for high speed frequency sweep with narrow bandwidth that is appropriate, for example, for selective manipulation of atomic states in a magneto-optical trap

Long-range propagation of ultrafast ionizing laser pulses in a resonant nonlinear medium

We study the propagation of 0.05-1 TW power, ultrafast laser pulses in a 10 meter long rubidium vapor cell. The central wavelength of the laser is resonant with the $D_2$ line of rubidium and the peak intensity in the $10^{12}-10^{14} ~W/cm^2$ range, enough to create a plasma channel with single electron ionization. We observe the absorption of the laser pulse for low energy, a regime of transverse confinement of the laser beam by the strong resonant nonlinearity for higher energies and the transverse broadening of the output beam when the nonlinearity is saturated due to full medium ionization. We compare experimental observations of transmitted pulse energy and transverse fluence profile with the results of computer simulations modeling pulse propagation. We find a qualitative agreement between theory and experiment that corroborates the validity of our propagation model. While the quantitative differences are substantial, the results show that the model can be used to interpret the observed phenomena in terms of self-focusing and channeling of the laser pulses by the saturable nonlinearity and the transparency of the fully ionized medium along the propagation axis

Proton beam defocusing in AWAKE: comparison of simulations and measurements

In 2017, AWAKE demonstrated the seeded self-modulation (SSM) of a 400 GeV proton beam from the Super Proton Synchrotron (SPS) at CERN. The angular distribution of the protons deflected due to SSM is a quantitative measure of the process, which agrees with simulations by the two-dimensional (axisymmetric) particle-in-cell code LCODE. Agreement is achieved for beam populations between $10^{11}$ and $3 \times 10^{11}$ particles, various plasma density gradients ($-20 \div 20\%$) and two plasma densities ($2\times 10^{14} \text{cm}^{-3}$ and $7 \times 10^{14} \text{cm}^{-3}$). The agreement is reached only in the case of a wide enough simulation box (at least five plasma wavelengths)

Experimental study of extended timescale dynamics of a plasma wakefield driven by a self-modulated proton bunch

Plasma wakefield dynamics over timescales up to 800 ps, approximately 100 plasma periods, are studied experimentally at the Advanced Wakefield Experiment (AWAKE). The development of the longitudinal wakefield amplitude driven by a self-modulated proton bunch is measured using the external injection of witness electrons that sample the fields. In simulation, resonant excitation of the wakefield causes plasma electron trajectory crossing, resulting in the development of a potential outside the plasma boundary as electrons are transversely ejected. Trends consistent with the presence of this potential are experimentally measured and their dependence on wakefield amplitude are studied via seed laser timing scans and electron injection delay scans