Mechanisms of deformation-induced trace element migration in zircon resolved by atom probe and correlative microscopy

The widespread use of zircon in geochemical and geochronological studies of crustal rocks is underpinned by an understanding of the processes that may modify its composition. Deformation during tectonic and impact related strain is known to modify zircon trace element compositions, but the mechanisms by which this occurs remain unresolved. Here we combine electron backscatter diffraction, transmission Kikuchi diffraction and atom probe microscopy to investigate trace element migration associated with a ~20 nm wide, 2° low-angle subgrain boundary formed in zircon during a single, high-strain rate, deformation associated with a bolide impact. The low-angle boundary shows elevated concentrations of both substitutional (Y) and interstitial (Al, Mg and Be) ions. The observed compositional variations reflect a dynamic process associated with the recovery of shock-induced vacancies and dislocations into lower energy low-angle boundaries. Y segregation is linked to the migration and localisation of oxygen vacancies, whilst the interstitial ions migrate in association with dislocations. These data represent the direct nanoscale observation of geologically-instantaneous, trace element migration associated with crystal plasticity of zircon and provide a framework for further understanding mass transfer processes in zircon

Variation de la composition de nanoparticules de 1-10 nm obtenues par séparation de phase dans un verre de silice

National audienceLes verres contenant des nanoparticules ont de nombreuses applications industrielles, notamment grâce à leurs excellentes propriétés thermo-mécaniques [1]. Ils présentent aussi un intérêt pour les propriétés optiques. En effet, l'encapsulation d'ions luminescents (ions de terre rare par exemple) dans des nanoparticules entraînent de nouvelles propriétés de luminescence qui n'existeraient pas dans le verre hôte (bande d'émission élargie, efficacité quantique augmentée, etc) [2]. La préparation de tels verres repose sur des mécanismes de nucléation, croissance et de démixtion dont les premières étapes sont encore assez mal connues. Mais l'avènement de nouvelles techniques de caractérisation à l'échelle nanométrique permet d'améliorer notre compréhension de ces phénomènes. Par exemple, une évolution structurelle des nanoparticules à travers des phases cristallines métastables [3] ou une transformation d'un nucléus amorphe vers une nanoparticule cristalline [4] ont été observées. Des changements de composition ont aussi été rapportés pour des particules de taille 1-10 nm dans des alliages [5] et dans des métaux [6]. Dans cette présentation, nous nous intéressons à la composition de nanoparticules amorphes obtenues par séparation de phase dans un verre de silice. De telles études ont été rendues possibles grâce au développement récent de l'APT (Atom Probe Tomography) pour l'analyse des verres [7]. Nous étudions une fibre optique à base de silice préparée par le procédé MCVD (Modified Chemical Vapor Deposition). Les nanoparticules sont obtenues en incorporant du magnésium qui déclenche une séparation de phase grâce aux traitements thermiques inhérents au procédé MCVD [8]. La composition des nanoparticules dans le verre de silice dopée avec Mg, P, Ge et Er est étudiée dans la gamme 1-10 nm. Nous montrons la partition de Mg, P et Er dans ces nanoparticules ainsi qu'une modification de la composition en fonction de la taille des particules

Triplet Exciton Generation in Bulk-Heterojunction Solar Cells based on Endohedral Fullerenes

Organic bulk-heterojunctions (BHJ) and solar cells containing the trimetallic nitride endohedral fullerene 1-[3-(2-ethyl)hexoxy carbonyl]propyl-1-phenyl-Lu3N@C80 (Lu3N@C80-PCBEH) show an open circuit voltage (VOC) 0.3 V higher than similar devices with [6,6]-phenyl-C[61]-butyric acid methyl ester (PC61BM). To fully exploit the potential of this acceptor molecule with respect to the power conversion efficiency (PCE) of solar cells, the short circuit current (JSC) should be improved to become competitive with the state of the art solar cells. Here, we address factors influencing the JSC in blends containing the high voltage absorber Lu3N@C80-PCBEH in view of both photogeneration but also transport and extraction of charge carriers. We apply optical, charge carrier extraction, morphology, and spin-sensitive techniques. In blends containing Lu3N@C80-PCBEH, we found 2 times weaker photoluminescence quenching, remainders of interchain excitons, and, most remarkably, triplet excitons formed on the polymer chain, which were absent in the reference P3HT:PC61BM blends. We show that electron back transfer to the triplet state along with the lower exciton dissociation yield due to intramolecular charge transfer in Lu3N@C80-PCBEH are responsible for the reduced photocurrent

Fiber Optic Dielectric Nanoparticles Characterization by Atom Probe Microscopy

International audienceThe engineered processing of dielectric nanoparticles (DNPs) in optical fibers via luminescent ion-doping of silica-based glass aims at providing an enhanced spectroscopic behavior compared to pure silica. These DNPs should positively impact applications in high power fiber lasers, light sources with new wavelengths and telecommunications. The prevalence of large phase immiscibility domains in silicate systems containing divalent metal oxides (Mg for instance) promotes the formation of DNPs through phase separation since heat treatments take place during the MCVD process. Even after 60 years of glass-ceramics research, lack of experimental data concerning early nucleation stages imposes variations in composition and heat treatments as processing steps [1]. Although classical nucleation theory was the first model proposed to explain those phenomena, growth rate mismatches remain wide. According to this capillary assumption-based model, nuclei and bulk share similar structure-composition relationship. Recent articles disprove assumption of structure, pointing toward DNPs structural changes [2] and transition from amorphous nuclei to crystalline DNPs [3]. Compositional changes for small particle sizes (~1-10 nm) have been measured in alloys with Anomalous Small Angle X-Ray Scattering (ASAXS) [4] and in steels with Atom Probe Tomography (APT) [5]. Recent developments in APT has allowed the extension of such studies to glass-ceramics [6], and in the current work, we report experimental data disproving the second capillary assumption at the early stage of nucleation-growth process. The atomic distribution map of Mg DNPs in silica-based glass doped with Mg, P, Ge and Er is reported in Figure 1 after APT analysis. In addition, quantitative assessment of Mg, P and Er content levels in DNPs smaller than 10nm in diameter (Figure 2) could refine the theories behind nucleation and growth mechanisms

Detailed study of N,N'-(diisopropylphenyl)- terrylene-3,4:11,12-bis(dicarboximide) as electron acceptor for solar cells application

We report on terrylene-3,4:11,12-bis(dicarboximide) (TDI) as electron acceptor for bulk-heterojunction solar cells using poly(3-hexyl thiophene) (P3HT) as complementary donor component. Enhanced absorption was observed in the blend compared to pure P3HT. As shown by the very efficient photoluminescence (PL) quenching, the generated excitons are collected at the interface between the donor and acceptor, where they separate into charges which we detect by photoinduced absorption and electron-spin resonance (ESR). Time-of-flight (TOF) photoconductivity measurements reveal a good electron mobility of 10-3 cm2 V-1 s-1 in the blend. Nevertheless, the photocurrent in solar cells was found to be surprisingly low. Supported by the external quantum efficiency (EQE) spectrum as well as morphological studies by way of X-ray diffraction and atomic force microscopy, we explain our observation by the formation of a TDI hole blocking layer at the anode interface which prevents the efficiently generated charges to be extracted.Comment: Original research article, 9 pages, 10 figures, 1 tabl

Multiscale Self-Assembly of Silicon Quantum Dots into an Anisotropic Three-Dimensional Random Network

Multiscale self-assembly is ubiquitous in nature but its deliberate use to synthesize multifunctional three-dimensional materials remains rare, partly due to the notoriously difficult problem of controlling topology from atomic to macroscopic scales to obtain intended material properties. Here, we propose a simple, modular, noncolloidal methodology that is based on exploiting universality in stochastic growth dynamics and driving the growth process under far-from-equilibrium conditions toward a preplanned structure. As proof of principle, we demonstrate a confined-but-connected solid structure, comprising an anisotropic random network of silicon quantum-dots that hierarchically self-assembles from the atomic to the microscopic scales. First, quantum-dots form to subsequently interconnect without inflating their diameters to form a random network, and this network then grows in a preferential direction to form undulated and branching nanowire-like structures. This specific topology simultaneously achieves two scale-dependent features, which were previously thought to be mutually exclusive: good electrical conduction on the microscale and a bandgap tunable over a range of energies on the nanoscale. © 2016 American Chemical Society

Physiologic upper limit of pore size in the blood-tumor barrier of malignant solid tumors

<p>Abstract</p> <p>Background</p> <p>The existence of large pores in the blood-tumor barrier (BTB) of malignant solid tumor microvasculature makes the blood-tumor barrier more permeable to macromolecules than the endothelial barrier of most normal tissue microvasculature. The BTB of malignant solid tumors growing outside the brain, in peripheral tissues, is more permeable than that of similar tumors growing inside the brain. This has been previously attributed to the larger anatomic sizes of the pores within the BTB of peripheral tumors. Since in the physiological state <it>in vivo </it>a fibrous glycocalyx layer coats the pores of the BTB, it is possible that the effective physiologic pore size in the BTB of brain tumors and peripheral tumors is similar. If this were the case, then the higher permeability of the BTB of peripheral tumor would be attributable to the presence of a greater number of pores in the BTB of peripheral tumors. In this study, we probed <it>in vivo </it>the upper limit of pore size in the BTB of rodent malignant gliomas grown inside the brain, the orthotopic site, as well as outside the brain in temporalis skeletal muscle, the ectopic site.</p> <p>Methods</p> <p>Generation 5 (G5) through generation 8 (G8) polyamidoamine dendrimers were labeled with gadolinium (Gd)-diethyltriaminepentaacetic acid, an anionic MRI contrast agent. The respective Gd-dendrimer generations were visualized <it>in vitro </it>by scanning transmission electron microscopy. Following intravenous infusion of the respective Gd-dendrimer generations (Gd-G5, N = 6; Gd-G6, N = 6; Gd-G7, N = 5; Gd-G8, N = 5) the blood and tumor tissue pharmacokinetics of the Gd-dendrimer generations were visualized <it>in vivo </it>over 600 to 700 minutes by dynamic contrast-enhanced MRI. One additional animal was imaged in each Gd-dendrimer generation group for 175 minutes under continuous anesthesia for the creation of voxel-by-voxel Gd concentration maps.</p> <p>Results</p> <p>The estimated diameters of Gd-G7 dendrimers were 11 ± 1 nm and those of Gd-G8 dendrimers were 13 ± 1 nm. The BTB of ectopic RG-2 gliomas was more permeable than the BTB of orthotopic RG-2 gliomas to all Gd-dendrimer generations except for Gd-G8. The BTB of both ectopic RG-2 gliomas and orthotopic RG-2 gliomas was not permeable to Gd-G8 dendrimers.</p> <p>Conclusion</p> <p>The physiologic upper limit of pore size in the BTB of malignant solid tumor microvasculature is approximately 12 nanometers. In the physiologic state <it>in vivo </it>the luminal fibrous glycocalyx of the BTB of malignant brain tumor and peripheral tumors is the primary impediment to the effective transvascular transport of particles across the BTB of malignant solid tumor microvasculature independent of tumor host site. The higher permeability of malignant peripheral tumor microvasculature to macromolecules smaller than approximately 12 nm in diameter is attributable to the presence of a greater number of pores underlying the glycocalyx of the BTB of malignant peripheral tumor microvasculature.</p

Effective transvascular delivery of nanoparticles across the blood-brain tumor barrier into malignant glioma cells

<p>Abstract</p> <p>Background</p> <p>Effective transvascular delivery of nanoparticle-based chemotherapeutics across the blood-brain tumor barrier of malignant gliomas remains a challenge. This is due to our limited understanding of nanoparticle properties in relation to the physiologic size of pores within the blood-brain tumor barrier. Polyamidoamine dendrimers are particularly small multigenerational nanoparticles with uniform sizes within each generation. Dendrimer sizes increase by only 1 to 2 nm with each successive generation. Using functionalized polyamidoamine dendrimer generations 1 through 8, we investigated how nanoparticle size influences particle accumulation within malignant glioma cells.</p> <p>Methods</p> <p>Magnetic resonance and fluorescence imaging probes were conjugated to the dendrimer terminal amines. Functionalized dendrimers were administered intravenously to rodents with orthotopically grown malignant gliomas. Transvascular transport and accumulation of the nanoparticles in brain tumor tissue was measured <it>in vivo </it>with dynamic contrast-enhanced magnetic resonance imaging. Localization of the nanoparticles within glioma cells was confirmed <it>ex vivo </it>with fluorescence imaging.</p> <p>Results</p> <p>We found that the intravenously administered functionalized dendrimers less than approximately 11.7 to 11.9 nm in diameter were able to traverse pores of the blood-brain tumor barrier of RG-2 malignant gliomas, while larger ones could not. Of the permeable functionalized dendrimer generations, those that possessed long blood half-lives could accumulate within glioma cells.</p> <p>Conclusion</p> <p>The therapeutically relevant upper limit of blood-brain tumor barrier pore size is approximately 11.7 to 11.9 nm. Therefore, effective transvascular drug delivery into malignant glioma cells can be accomplished by using nanoparticles that are smaller than 11.7 to 11.9 nm in diameter and possess long blood half-lives.</p