Antivirals Reduce the Formation of Key Alzheimer's Disease Molecules in Cell Cultures Acutely Infected with Herpes Simplex Virus Type 1

Alzheimer's disease (AD) afflicts around 20 million people worldwide and so there is an urgent need for effective treatment. Our research showing that herpes simplex virus type 1 (HSV1) is a risk factor for AD for the brains of people who possess a specific genetic factor and that the virus causes accumulation of key AD proteins (β-amyloid (Aβ) and abnormally phosphorylated tau (P-tau)), suggests that anti-HSV1 antiviral agents might slow AD progression. However, currently available antiviral agents target HSV1 DNA replication and so might be successful in AD only if Aβ and P-tau accumulation depend on viral DNA replication. Therefore, we investigated firstly the stage(s) of the virus replication cycle required for Aβ and P-tau accumulation, and secondly whether antiviral agents prevent these changes using recombinant strains of HSV1 that progress only partly through the replication cycle and antiviral agents that inhibit HSV1 DNA replication. By quantitative immunocytochemistry we demonstrated that entry, fusion and uncoating of HSV1, are insufficient to induce Aβ and P-tau production. We showed also that none of the “immediate early” viral proteins is directly responsible, and that Aβ and P-tau are produced at a subsequent stage of the HSV1 replication cycle. Importantly, the anti-HSV1 antiviral agents acyclovir, penciclovir and foscarnet reduced Aβ and P-tau accumulation, as well as HSV1, with foscarnet being less effective in each case. P-tau accumulation was found to depend on HSV1 DNA replication, whereas Aβ accumulation was not. The antiviral-induced decrease in Aβ is attributable to the reduced number of new viruses, and hence the reduction in viral spread. Since antiviral agents reduce greatly Aβ and P-tau accumulation in HSV1-infected cells, they would be suitable for treating AD with great advantage unlike current AD therapies, only the virus, not the host cell, would be targeted

Intensified treatment with high dose Rifampicin and Levofloxacin compared to standard treatment for adult patients with Tuberculous Meningitis (TBM-IT): protocol for a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Tuberculous meningitis is the most severe form of tuberculosis. Mortality for untreated tuberculous meningitis is 100%. Despite the introduction of antibiotic treatment for tuberculosis the mortality rate for tuberculous meningitis remains high; approximately 25% for HIV-negative and 67% for HIV positive patients with most deaths occurring within one month of starting therapy. The high mortality rate in tuberculous meningitis reflects the severity of the condition but also the poor antibacterial activity of current treatment regimes and relatively poor penetration of these drugs into the central nervous system. Improving the antitubercular activity in the central nervous system of current therapy may help improve outcomes. Increasing the dose of rifampicin, a key drug with known poor cerebrospinal fluid penetration may lead to higher drug levels at the site of infection and may improve survival. Of the second generation fluoroquinolones, levofloxacin may have the optimal pharmacological features including cerebrospinal fluid penetration, with a ratio of Area Under the Curve (AUC) in cerebrospinal fluid to AUC in plasma of >75% and strong bactericidal activity against <it>Mycobacterium tuberculosis</it>. We propose a randomized controlled trial to assess the efficacy of an intensified anti-tubercular treatment regimen in tuberculous meningitis patients, comparing current standard tuberculous meningitis treatment regimens with standard treatment intensified with high-dose rifampicin and additional levofloxacin.</p> <p>Methods/Design</p> <p>A randomized, double blind, placebo-controlled trial with two parallel arms, comparing standard Vietnamese national guideline treatment for tuberculous meningitis with standard treatment <it>plus </it>an increased dose of rifampicin (to 15 mg/kg/day total) and additional levofloxacin. The study will include 750 patients (375 per treatment group) including a minimum of 350 HIV-positive patients. The calculation assumes an overall mortality of 40% vs. 30% in the two arms, respectively (corresponding to a target hazard ratio of 0.7), a power of 80% and a two-sided significance level of 5%. Randomization ratio is 1:1. The primary endpoint is overall survival, i.e. time from randomization to death during a follow-up period of 9 months. Secondary endpoints are: neurological disability at 9 months, time to new neurological event or death, time to new or recurrent AIDS-defining illness or death (in HIV-positive patients only), severe adverse events, and rate of treatment interruption for adverse events.</p> <p>Discussion</p> <p>Currently very few options are available for the treatment of TBM and the mortality rate remains unacceptably high with severe disabilities seen in many of the survivors. This trial is based on the hypothesis that current anti-mycobacterial treatment schedules for TBM are not potent enough and that outcomes will be improved by increasing the CSF penetrating power of this regimen by optimising dosage and using additional drugs with better CSF penetration.</p> <p>Trial registration</p> <p>International Standard Randomised Controlled Trial Number <a href="http://www.controlled-trials.com/ISRCTN61649292">ISRCTN61649292</a></p

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such as extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, including design flexibility and control and manufacture which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry

New Renewable and Biodegradable Particleboards from Jatropha Press Cakes

The influence of thermo-pressing conditions on the mechanical properties of particleboards obtained from Jatropha press cakes was evaluated in this study. Conditions such as molding temperature and press cake oil content were included. All particleboards were cohesive, with proteins and fibers acting respectively as binder and reinforcing fillers. Generally, it was the molding temperature that most affected particleboard mechanical properties. The most resistant boards were obtained using 200°C molding temperature. Glass transition of proteins then occurred during molding, resulting in effective wetting of the fibers. At this optimal molding temperature, the best compromise between flexural properties (7.2 MPa flexural strength at break and 2153 MPa elastic modulus), Charpy impact strength (0.85 kJ/m²) and Shore D surface hardness (71.6°), was a board obtained from press cake with low oil content (7.7%). Such a particleboard would be usable as interlayer sheets for pallets, for the manufacture of containers or furniture, or in the building trade

Assessing the impacts of short-course multidrug-resistant tuberculosis treatment in the Southeast Asia Region using a mathematical modeling approach

This study aimed to predict the impacts of shorter duration treatment regimens for multidrug-resistant tuberculosis (MDR-TB) on both MDR-TB percentage among new cases and overall MDR-TB cases in the WHO Southeast Asia Region. A deterministic compartmental model was constructed to describe both the transmission of TB and the MDR-TB situation in the Southeast Asia region. The population-level impacts of short-course treatment regimens were compared with the impacts of conventional regimens. Multi-way analysis was used to evaluate the impact by varying programmatic factors (eligibility for short-course MDR-TB treatment, treatment initiation, and drug susceptibility test (DST) coverage). The model predicted that overall TB incidence will be reduced from 246 (95% credible intervals (CrI), 221-275) per 100,000 population in 2020 to 239 (95% CrI, 215-267) per 100,000 population in 2035, with a modest reduction of 2.8% (95% CrI, 2.7%-2.9%). Despite the slight reduction in overall TB infections, the model predicted that the MDR-TB percentage among newly notified TB infections will remain steady, with 2.4% (95% CrI, 2.1-2.9) in 2020 and 2.5% (95% CrI, 2.3-3.1) in 2035, using conventional MDR-TB treatment. With the introduction of short-course regimens to treat MDR-TB, the development of resistance can be slowed by 38.6% (95% confidence intervals (CI), 35.9-41.3) reduction in MDR-TB case number, and 37.6% (95% CI, 34.9-40.3) reduction in MDR-TB percentage among new TB infections over the 30-year period compared with the baseline using the standard treatment regimen. The multi-way analysis showed eligibility for short-course treatment and treatment initiation greatly influenced the impacts of short-course treatment regimens on reductions in MDR-TB cases and percentage resistance among new infections. Policies which promote the expansion of short-course regimens and early MDR-TB treatment initiation should be considered along with other interventions to tackle antimicrobial resistance in the region

Multidisciplinary Experience Feedback on the Use of the HandiMathKey Keyboard in a Middle School

International audienceThere is a poorly addressed input area in the accessibility field that deals with the input of scientific elements including mathematical formulas. Few studies have addressed this issue although Word and Open Office editors offer input interfaces consisting of button bars associated with mathematical symbols and an “input sheet”. The analysis of input activity with these tools with disabled children has revealed that the use of these bars is complex and tiring. HandyMathKey is virtual keyboard co-designed by specialized teacher and human-interaction researchers to address the difficulties of numerical mathematical input tools. The purpose of this paper is to describe the observation method implemented in a 4th grade class at the Centre Jean Lagarde in Toulouse and to report few results on usability of HMK

AB0345 Does iron deficiency contribute to fatigue of patients with rheumatoid arthritis without anaemia?

Congress of the European-League-Against-Rheumatism (EULAR), Amsterdam, NETHERLANDS, JUN 13-16, 2018International audienc