17 research outputs found
Experimental demonstration of a suspended diffractively coupled optical cavity
All-reflective optical systems are under consideration for future gravitational wave detector topologies. One approach in proposed designs is to use diffraction gratings as input couplers for Fabry–Perot cavities. We present an experimental demonstration of a fully suspended diffractively coupled cavity and investigate the use of conventional Pound–Drever–Hall length sensing and control techniques to maintain the required operating condition
The status of GEO 600
The GEO 600 laser interferometer with 600m armlength is part of a worldwide network of gravitational wave detectors. GEO 600 is unique in having advanced multiple pendulum suspensions with a monolithic last stage and in employing a signal recycled optical design. This paper describes the recent commissioning of the interferometer and its operation in signal recycled mode
Search for Gravitational Waves from Intermediate Mass Binary Black Holes
We present the results of a weakly modeled burst search for gravitational
waves from mergers of non-spinning intermediate mass black holes (IMBH) in the
total mass range 100--450 solar masses and with the component mass ratios
between 1:1 and 4:1. The search was conducted on data collected by the LIGO and
Virgo detectors between November of 2005 and October of 2007. No plausible
signals were observed by the search which constrains the astrophysical rates of
the IMBH mergers as a function of the component masses. In the most efficiently
detected bin centered on 88+88 solar masses, for non-spinning sources, the rate
density upper limit is 0.13 per Mpc^3 per Myr at the 90% confidence level.Comment: 13 pages, 4 figures: data for plots and archived public version at
https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=62326, see also the
public announcement at http://www.ligo.org/science/Publication-S5IMBH
Experimental demonstration of a suspended, diffractively coupled Fabry‚ Perot cavity
Diffraction gratings have been considered as input couplers for Fabry-Perot cavities in future gravitational wave detectors. We experimentally demonstrate the use of a triple-suspended, diffractively coupled cavity and examine conventional Pound-Drever-Hall length sensing and control techniques to maintain the required operating condition. Utilizing the diffractively coupled Fabry-Perot cavity, we investigate the effects associated with translational grating motion and observe a unique 1/ f slope in the magnitude of the frequency response when monitoring the forward-reflected error signal
Quadruple suspension design for Advanced LIGO
In this paper, we describe the conceptual design for the suspension system for the test masses for Advanced LIGO, the planned upgrade to LIGO, the US laser interferometric gravitational-wave observatory. The design is based on the triple pendulum design developed for GEO 600-the German/UK interferometric gravitational wave detector. The GEO design incorporates fused silica fibres of circular cross-section attached to the fused silica mirror (test mass) in the lowest pendulum stage, in order to minimize the thermal noise from the pendulum modes. The damping of the low-frequency modes of the triple pendulum is achieved by using co-located sensors and actuators at the highest mass of the triple pendulum. Another feature of the design is that global control forces acting on the mirrors, used to maintain the output of the interferometer on a dark fringe, are applied via a triple reaction pendulum, so that these forces can be implemented via a seismically isolated platform. These techniques have been extended to meet the more stringent noise levels planned for in Advanced LIGO. In particular, the Advanced LIGO baseline design requires a quadruple pendulum with a final stage consisting of a 40 kg sapphire mirror, suspended on fused silica ribbons or fibres. The design is chosen to aim to reach a target noise contribution from the suspension corresponding to a displacement sensitivity of 10/sup -19/ m Hz/sup -1/2/ at 10 Hz at each of the test masses
Silica research in Glasgow
The Glasgow group is involved in the construction of the GEO600 interferometer as well as in R and D activity on technology for advanced gravitational wave detectors. GEO600 will be the first GW detector using quasimonolithic silica suspensions in order to decrease thermal noise significantly with respect to steel wire suspensions. The results concerning GEO600 suspension mounting and performance will be shown in the first section. Section 2 is devoted to the present results from the direct measurement of thermal noise in mirrors mounted in the 1.0 m interferometer in Glasgow which has a sensitivity limit of 4 * 10/sup -19/ m Hz/sup -1/2/ above 1 kHz. Section 3 presents results on the measurements of coating losses. R and D activity has been carried out to understand better how thermal noise in the suspensions affects the detector sensitivity, and in section 4 a discussion on the non-linear thermoelastic effect is presented
The status of GEO600
GEO600, the German/British gravitational wave detector currently being built in northern Germany, used advanced optical technologies to obtain a sensitivity comparable with the other, bigger detectors currently being built. The installation of the ultra-high-vacuum system has almost been completed and the Mode Cleaners are operational
The GEO600 gravitational wave detector: pulsar prospects
The GEO600 laser-interferometric gravitational wave detector near Hannover, Germany, is one of six such interferometers now close to operation worldwide. The UK/German GEO collaboration uses advanced technologies, including monolithic silica suspensions and signal recycling, to deliver a sensitivity comparable with much larger detectors in their initial configurations. Here we review the design and performance of GEO600 and consider the prospects for a direct detection of continuous gravitational waves from spinning neutron stars
The GEO600 gravitational wave detector: pulsar prospects
The GEO600 laser-interferometric gravitational wave detector near Hannover, Germany, is one of six such interferometers now close to operation worldwide. The UK/German GEO collaboration uses advanced technologies, including monolithic silica suspensions and signal recycling, to deliver a sensitivity comparable with much larger detectors in their initial configurations. Here we review the design and performance of GEO600 and consider the prospects for a direct detection of continuous gravitational waves from spinning neutron stars