Near-infrared photoluminescence of erbium tris(8-hydroxyquinoline) spin-coated thin films induced by low coherence light sources

Copyright 2007 AIP Publishing LLC. This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Applied Physics Letters [91, 021106 (2007)] and may be found at

A rare-event study of frequency regulation and contingency services from grid-scale batteries

We perform a rare-event study on a simulated power system in which grid-scale batteries provide both regulation and emergency frequency control ancillary services. Using a model of random power disturbances at each bus, we employ the skipping sampler, a Markov Chain Monte Carlo algorithm for rare-event sampling, to build conditional distributions of the power disturbances leading to two kinds of instability: frequency excursions outside the normal operating band, and load shedding. Potential saturation in the benefits, and competition between the two services, are explored as the battery maximum power output increases

Laser pulse effects on plasma-sprayed and bulk tungsten

Tungsten (W) is considered a promising plasma-facing material for protecting the divertor of the ITER (International Thermonuclear Experimental Reactor). The effects on W of transient thermal loads of high energy occurring in a tokamak under operative conditions have been simulated through a single laser pulse delivered by an Nd:YAG laser. Bulk and plasma-sprayed (PS) samples have been submitted to tests and successively examined via SEM (scanning electron microscopy) observations. In both types of materials, the laser pulse induces similar effects: (i) a crater forms in the spot central area; (ii) all around the area, the ejection and the movement of molten metal give rise to a ridge; (iii) in a more external area, the surface shows plates with jagged boundaries and cracks induced by thermal stresses; (iv) the pores present in the original material become preferred ablation sites. However, the affected surface area in PS samples is larger and asymmetric if compared to that of bulk material. Such a difference has been explained by considering how microstructural characteristics influence heat propagation from the irradiated spot, and it was found that grain size and shape play a decisive role

Colorimetric and fluorescent sensing of copper ions in water through o-phenylenediamine-derived carbon dots

Fluorescent nitrogen and sulfur co-doped carbon dots (NSCDs) were synthesized using a simple one-step hydrothermal method starting from o-phenylenediamine (OPD) and ammonium sulfide. The prepared NSCDs presented a selective dual optical response to Cu(II) in water through the arising of an absorption band at 660 nm and simultaneous fluorescence enhancement at 564 nm. The first effect was attributed to formation of cuprammonium complexes through coordination with amino functional groups of NSCDs. Alternatively, fluorescence enhancement can be explained by the oxidation of residual OPD bound to NSCDs. Both absorbance and fluorescence showed a linear increase with an increase of Cu(II) concentration in the range 1-100 mu M, with the lowest detection limit of 100 nM and 1 mu M, respectively. NSCDs were successfully incorporated in a hydrogel agarose matrix for easier handling and application to sensing. The formation of cuprammonium complexes was strongly hampered in an agarose matrix while oxidation of OPD was still effective. As a result, color variations could be perceived both under white light and UV light for concentrations as low as 10 mu M. Since these color changes were similarly perceived in tap and lake water samples, the present method could be a promising candidate for simple, cost-effective visual monitoring of copper onsite

Fully-digital low-frequency lock-in amplifier for photoluminescence measurements

Lock-in amplifiers, used in several experimental physics applications, are instruments performing quadrature demodulation, which is useful when signals are affected by much noise. Generally, commercially-available lock-in amplifiers are very accurate, but expensive, especially if their operating range includes radiofrequencies. In many applications, high precision is not necessary for the measurements, but it is preferable to have low-cost, low-weight, compactness and a user-friendly graphical unit interface. In this paper, we describe a new fully-digital low-frequency lock-in amplifier developed at ENEA C.R. Frascati Laboratories for photoluminescence experiments based on an innovative low-cost architecture and processing algorithms. The hardware, firmware and software developed for the whole photoluminescence measurement set-up is presented. The present lock-in was first characterized with synthetic electrical sine wave signals and white noise. A dynamic reserve of 43 dB and a noise figure in the range of 25–44 dB were estimated. These results show compatibility with several measurement applications, such as photoluminescence, and the adequacy of the resolutions with respect to the hardware costs. Finally, preliminary results of photoluminescence measurements are presented

Zn–al layered double hydroxides synthesized on aluminum foams for fluoride removal from water

Fluoride excess in water represents an environmental issue and a risk for human health since it can cause several diseases, such as fluorosis, osteoporosis, and damage of the nervous system. Layered double hydroxides (LDHs) can be exploited to remove this contaminant from water by taking advantage of their high ion-exchange capability. LDHs are generally mixed with polluted water in the form of powders, which then cause the problem of uneasy separation of the contaminated LDH sludge from the purified liquid. In this work, Zn–Al LDH films were directly grown in situ on aluminum foams that acted both as the reactant and substrate. This method enabled the removal of fluoride ions by simple immersion, with ensuing withdrawal of the foam from the de-contaminated water. Different LDH synthesis methods and aluminum foam types were investigated to improve the adsorption process. The contact time, initial fluoride concentration, adsorbent dosage, and pH were studied as the parameters that affect the fluoride adsorption capacity and efficiency. The highest absorption efficiency of approximately 70% was obtained by using two separate growth methods after four hours, and it effectively reduced the fluoride concentration from 3 mg/L to 1.1 mg/L, which is below the threshold value set by WHO for drinking water

Designing cascades of electron transfer processes in multicomponent graphene conjugates

A novel family of nanocarbon-based materials was designed, synthesized, and probed within the context of charge-transfer cascades. We integrated electron-donating ferrocenes with light-harvesting/electron-donating (metallo)porphyrins and electron-accepting graphene nanoplates (GNP) into multicomponent conjugates. To control the rate of charge flow between the individual building blocks, we bridged them via oligo-p-phenyleneethynylenes of variable lengths by β-linkages and the Prato-Maggini reaction. With steady-state absorption, fluorescence, Raman, and XPS measurements we realized the basic physico-chemical characterization of the photo- and redox-active components and the multicomponent conjugates. Going beyond this, we performed transient absorption measurements and corroborated by single wavelength and target analyses that the selective (metallo)porphyrin photoexcitation triggers a cascade of charge transfer events, that is, charge separation, charge shift, and charge recombination, to enable the directed charge flow. The net result is a few nanosecond-lived charge-separated state featuring a GNP-delocalized electron and a one-electron oxidized ferrocenium

Phospho-mTOR expression in human glioblastoma microglia-macrophage cells

The glioblastoma (GBM) immune microenvironment is highly heterogeneous, and microglia may represent 30–70% of the entire tumor. However, the role of microglia and other specific immune populations is poorly characterized. Activation of mTOR signaling occurs in numerous human cancers and has roles in microglia-glioma cell interactions. We now show in human tumor specimens (42 patients), that 39% of tumor-associated microglial (TAM) cells express mTOR phosphorylated at Ser-2448; and similar mTOR activation is observed using a human microglia-glioma interaction paradigm. In addition, we confirm previous studies that microglia express urea and ARG1 (taken as M2 marker) in the presence of glioma cells, and this phenotype is down-regulated in the presence of a mTOR inhibitor. These results suggest that mTOR suppression in GBM patients might induce a reduction of the M2 phenotype expression in up to 40% of all TAMs. Since the M2 profile of microglial activation is believed to be associated with tumor progression, reductions in that phenotype may represent an additional anti-tumor mechanism of action of mTOR inhibitors, along with direct anti-proliferative activities

Plastic fiber design for THz generation through wavelength translation

We report on an all-fiber Terahertz (THz) radiation source by exploiting nonlinear parametric process in a theoretically designed microstructured-core double clad plastic fiber (MC-DCPF). The required phase-matching condition is satisfied through suitable tailoring of the fiber dispersion and nonlinear properties at the pump wavelength of a high power CO2 laser, with a CO laser of much lower power acting as a seed concomitantly. Our simulated results reveal that a THz radiation source at the frequency of ~ 3 THz could be realized with a 3-dB phase-matching band-width of 2.13 GHz in a 65 m long optimized MC-DCPF. Maximum power conversion efficiency >1% is realizable even after including the material loss

Double-plating of ovine critical sized defects of the tibia: a low morbidity model enabling continuous in vivo monitoring of bone healing

<p>Abstract</p> <p>Background</p> <p>Recent studies using sheep critical sized defect models to test tissue engineered products report high morbidity and complications rates. This study evaluates a large bone defect model in the sheep tibia, stabilized with two, a novel Carbon fibre Poly-ether-ether-ketone (CF-PEEK) and a locking compression plate (LCP) which could sustain duration for up to 6 month with an acceptable low complication rate.</p> <p>Methods</p> <p>A large bone defect of 3 cm was performed in the mid diaphysis of the right tibia in 33 sheep. The defect was stabilised with the CF - PEEK plate and an LCP. All sheep were supported with slings for 8 weeks after surgery. The study was carried out for 3 months in 6 and for 6 months in 27 animals.</p> <p>Results</p> <p>The surgical procedure could easily be performed in all sheep and continuous in vivo radiographic evaluation of the defect was possible. This long bone critical sized defect model shows with 6.1% a low rate of complications compared with numbers mentioned in the literature.</p> <p>Conclusions</p> <p>This experimental animal model could serve as a standard model in comparative research. A well defined standard model would reduce the number of experimental animals needed in future studies and would therefore add to ethical considerations.</p