1,661 research outputs found
Lunar orbital photogaphic planning charts for candidate Apollo J-missions
A technique is presented for minimizing Mapping Camera film usage by reducing redundant coverage while meeting the desired sidelap of greater than or equal to 55%. The technique uses the normal groundtrack separation determined as a function of the number of revolutions between the respective tracks, of the initial and final nodal azimuths (or orbital inclination), and of the lunar latitude. The technique is also applicable for planning Panoramic Camera photography such that photographic contiguity is attained but redundant coverage is minimized. Graphs are included for planning mapping camera (MC) and panoramic camera (PC) photographic passes for a specific mission (i.e., specific groundtracks) to Descartes (Apollo 16), for specific missions to potential Apollo 17 sites such as Alphonsus, Proclus, Gassendi, Davy, and Tycho, and for a potential Apollo orbit-only mission with a nodal azimuth of 85 deg. Graphs are also included for determining the maximum number of revolutions which can elapse between successive MC and PC passes, for greater than or equal 55% sidelap and rectified contiguity respectively, for nodal azimuths between 5 deg and 85 deg
Assessing the longitudinal relationship between Peruvian childrenâs TV exposure and unhealthy food consumption
The use of orbitals and full spectra to identify misalignment
In this paper, a SpectraQuest demonstrator is used to introduce misalignment in a rotating set-up. The vibrations caused by misalignment is measured with both accelerometers on the bearings and eddy current probes on the shaft itself. A comparison is made between the classical spectral analysis, orbitals and full spectra. Orbitals are used to explain the physical interpretation of the vibration caused by misalignment. Full spectra allow to distinguish unbalance from misalignment by looking at the forward and reversed phenomena. This analysis is done for different kinds of misalignment, couplings, excitation forces and combined machinery faults
Purification and partial characterization of an extracellular melanoprotein from the fungus Venturia inaequalis
The fungus Venturia inaequalis clone No. 36 isolated from Malus domestica cv. Gloster excretes a melanoprotein of 36 kDa in relatively high amounts during growth in liquid culture. The protein was isolated from the culture medium and purified to homogeneity. It was shown to contain melanin. After raising an antiserum against the isolated protein, the protein could be shown to be located in the apoplast fluid of the V. inaequalis infected Malus domestica cv. Elstar. Partial sequencing of the protein revealed no significant sequence homologies to so far sequenced proteins. The melanoprotein binds ferrous and ferric iron. Moreover, it could be shown that the binding of ferric iron (but not of ferrous iron) leads to a change in the absorbance of the protein suggesting a modification of the protein by ferric, but not by ferrous, iron. In addition to iron, the protein also binds copper, but does not bind manganese or nickel. A possible function of this protein in the recruiting and transport of iron and copper and/or in the protection of the fungus by metal-ion mediated oxidative stress is discussed. © 2005 Verlag der Zeitschrift fĂŒr Naturforschung
Evaluation of Direct and Indirect Methods of Repairing Fractured
INTRODUCTION: The most common technology used in producing a fixed partial denture is firing porcelain to metal. The fracture of veneering material rarely occurs, although it is one of the most striking problems in daily practise.
PURPOSE: The purpose of this study was to evaluate the shear bond strength of composite to porcelain and metal by using two intraoral repair methods: direct and indirect.
MATERIAL AND METHODS: The direct method was performed by using Ceramic Repair System (Ivoclar, Lichtenstein) with and without sandblasting. The indirect method involved Co-Jet system (ESPE,Germany) and Rely X ARC (3M,USA) as luting agents. 180 specimens fabricated with feldspathic porcelain and Ni-Cr alloy
were divided into 3 groups: CR/0 (direct method of repair without sandblasting), CR/S (direct method of repair with sandblasting) and CJ (indirect method based on Co-Jet system). Each of them was divided into 3 subgroups of 20: porcelain (P), porcelain and metal (P/M) and metal (M). The 10 specimens were then subjected to a shear test in a mechanical testing machine at a crosshead speed of
0.5 mm/min. Mode of failure was recorded. Means and standart deviations of loads were calculated.
RESULTS: Tested groups exhibited the following values in megapascals: CR/0-P = 20.36 ± 3.05; CR/0-P/M = 19.45 ± 3.49; CR/0-M = 10.86 ± 4.1; CR/S-P = 18.21 ± 2.62; CR/S-P/M = 19.34 ± 1.76; CR/S-M = 9,54 ± 2.48; CJ-P = 19.85 ± 1.94; CJ-P/M = 19,78 ± 3.60; CJ-M = 13.56 ± 3.82. The mean fractured loads were significantly lower for metal subgroups than for porcelain and porcelain/ metal subgroups.
CONCLUSION: Higher shear bond strength is expected when porcelain was fractured without extensive metal exposure
Contagious Education
The use of data to govern education is increasingly supported by the use of knowledge-based technologies, including algorithms, artificial intelligence (AI), and tracking technologies. Rather than accepting these technologies as possibilities to improve, reform, or more efficiently practice education, this intra-view discusses how these technologies portend possibilities to escape education. The intra-view revolves around Luciana Parisiâs idea of âdigital contagionsâ and participants muse about the contagious opportunities to escape the biopolitical, colonial, and historical rationalities that contemporary education now uses to govern populations in ways that are automated, modulated, and wearable
Conceptual design of elliptical cavities for intensity and position sensitive beam measurements in storage rings
Position sensitive beam monitors are indispensable for the beam diagnostics
in storage rings. Apart from their applications in the measurements of beam
parameters, they can be used in non-destructive in-ring decay studies of
radioactive ion beams as well as enhancing precision in the isochronous mass
measurement technique. In this work, we introduce a novel approach based on
cavities with elliptical cross-section, in order to compensate for existing
limitations in ion storage rings. The design is aimed primarily for future
heavy ion storage rings of the FAIR project. The conceptual design is discussed
together with simulation results.Comment: Added definition of Uv and Pdiss in the introduction section. Added
Mode numbering in table 1 and figure 1 for more clarity. Corrected one wrong
figure reference. Other minor typo correction
Media violence and adolescentsâ ADHD-related behaviors: The role of parental mediation
We examined the role of parental media mediation in the relationship between media violence and adolescentsâ ADHD-related behaviors. Survey data from 1,017 adolescents (10â14 years) show that parents can play an important role in this relationship, depending on the media mediation strategies that they use (i.e., restrictive or active mediation) and how they apply these strategies (i.e., in a controlling, inconsistent, or autonomy-supportive way). Our findings support the notion that contextual factors are critical in understanding media effects, and provide directions for how parents can manage their adolescentsâ violent media use, and possibly by extension, their ADHD-related behaviors
- âŠ