Pedestrian behaviour in urban area

The pedestrian behavior is influenced by several factors, including: characteristics of the user, numerousness of group, road infrastructures and environmental factors. These factors were studied by means the collection of data carried out in the city of Oristano (Sardinia-Italy) on eleven sidewalks and five crosswalks. The objective was to study the pedestrians behavior, researching the link between independent variables and the dependent variables that, for sidewalks was only the pedestrian speed while for crosswalks were the speed of crossing, the crossing time, the waiting time and the total time. The regression models were constructed by using ten sidewalks and four crosswalks so ignoring one for each. In the construction, were considered more variables that gradually were excluded on the basis of the p-value. The models thus detected were deemed significant according to their coefficient of determination and were validated with data from the sidewalk or crosswalk excluded from the construction of the same. Both for sidewalks that crosswalks were found some reliable models. The models construction is useful to improve the understanding of the pedestrians behavior and then obtain useful indications to design pedestrian infrastructures with characteristics closer to the real pedestrians behavior. The present study aims to give greater importance to pedestrians, analyzing how they relate with the urban context in which they live and how it conditions their behavior, so as to design infrastructure in which they feel an integral part and main actors of the urban scene, giving them the respect they deserve and a new sense of belonging to the city in which they live

Statistical Analysis of V85 Models on Horizontal Curves of Italian Two-Lane Rural Roads

Injuries are one of the main causes of death according to the new report published by WHO (World Health Organization). For this reason the attention of road safety research especially regards the study of the relationship between driver and road environment, in order to obtain a reduction of injuries number and severity. Several studies were developed to find the relationships between road geometrical and design features and driver behaviour. Generally driver behaviour is expressed by the operating speed. In scientific literature there exist several analytical models to calculate real speed as a function of geometrical road characteristics. In this work some of them were collected and their hypotheses were studied. Generally the values of these parameters were similar in the majority of the models and they can be found in the Italian rural roads in order to make surveys. The next step was the statistical analysis of the existing models with hypotheses that could be applied to Italian roads in order to define the best one

Romanesque and territory. The construction materials of Sardinian medieval churches: new approaches to the valorization, conservation and restoration

This paper is intended to illustrate a multidisciplinary research project devoted to the study of the constructive materials of the Romanesque churches in Sardinia during the “Giudicati” period (11th -13th centuries). The project focuses on the relationship between a selection of monuments and their territory, both from a historical-architectural perspective and from a more modern perspective addressing future restoration works. The methodologies of the traditional art-historical research (study of bibliographic, epigraphic and archival sources, formal reading of artifacts) are flanked by new technologies: digital surveys executed with a 3D laser-scanner, analyses of the materials (stones, mortars, bricks) with different instrumental methods: X-ray fluorescence (XRF) and inductively coupled mass spectrometry (ICP-MS) for chemical composition, X-ray diffractometer (XRD) to determine the alteration phases (e.g., soluble salts), optical microscopy and electronic (SEM) to study textures, mineral assemblages and microstructures, termogravimetric/differential scanning, calorimetric analysis (TG/DTA) for the composition of the binder mortars. This multidisciplinary approach allows the achieving of important results in an archaeometric context: 1) from a historical point of view, with the possible identification of ancient traffics, trade routes, sources of raw materials, construction phases, wall textures; 2) from a conservative point of view, by studying chemical and physical weathering processes of stone materials compatible for replacement in case of future restoration works. Sardinian Romanesque architectural heritage is particularly remarkable: about 200 churches of different types and sizes, with the almost exclusive use of cut stones. Bi- or poly-chromy, deriving from the use of different building materials, characterizes many of these monuments, becoming also a vehicle for political and cultural meanings. The paper will present some case studies aimed to illustrate the progress of the project and the results achieved

Optical measurements of phase steps in segmented mirrors - fundamental precision limits

Phase steps are an important type of wavefront aberrations generated by large telescopes with segmented mirrors. In a closed-loop correction cycle these phase steps have to be measured with the highest possible precision using natural reference stars, that is with a small number of photons. In this paper the classical Fisher information of statistics is used for calculating the Cramer-Rao bound, which determines the limit to the precision with which the height of the steps can be estimated in an unbiased fashion with a given number of photons and a given measuring device. Four types of measurement devices are discussed: a Shack-Hartmann sensor with one small cylindrical lenslet covering a sub-aperture centred over a border, a modified Mach-Zehnder interferometer, a Foucault test, and a curvature sensor. The Cramer-Rao bound is calculated for all sensors under ideal conditions, that is narrowband measurements without additional noise or disturbances apart from the photon shot noise. This limit is compared with the ultimate quantum statistical limit for the estimate of such a step which is independent of the measuring device. For the Shack-Hartmann sensor, the effects on the Cramer-Rao bound of broadband measurements, finite sampling, and disturbances such as atmospheric seeing and detector readout noise are also investigated. The methods presented here can be used to compare the precision limits of various devices for measuring phase steps and for optimising the parameters of the devices. Under ideal conditions the Shack-Hartmann and the Foucault devices nearly attain the ultimate quantum statistical limits, whereas the Mach-Zehnder and the curvature devices each require approximately twenty times as many photons in order to reach the same precision.Comment: 23 pages, 19 figures, to be submitted to Journal of Modern Optic

Experimental evaluation of PM emission from red mud basins exposed to wind erosion

The disposal of industrial and mineral processing residues represents a major concern for human health and the environment as a whole. In order to reduce the impact on soil and groundwater due to the waste leachability, the implementation of environmental regulations worldwide has favored the conversion of the disposal techniques from wet to dry (i.e., dry stacking or dry disposal). Such a change in the storage practice may cause the increase of particulate matter (PM) emission from the dry surfaces of the tailings exposed to wind erosion. Considering the significance of the environmental issue on a global scale and the increasingly stricter orientation of environmental policies, the need for modeling tools capable of estimating the contribution of tailing basins to air pollution becomes apparent. The paper deals with the disposal of red mud resulting from the bauxite processing in the alumina industry. An experimental research was carried with an environmental wind tunnel to estimate the Emission Factor (EF) of the basin surfaces as a function of the main affecting variables (i.e., residue water content and wind velocity). The article reports the results of the experimental test carried out on the red mud from a major basin located in Sardinia (Italy)

A SIMULATION TOOL ASSISTING THE DESIGN OF A CLOSE RANGE PHOTOGRAMMETRY SYSTEM FOR THE SARDINIA RADIO TELESCOPE

The Sardinia Radio Telescope (SRT) is a 64 m diameter antenna, whose primary mirror is equipped with an active surface capable to correct its deformations by means of a thick network of actuators. Close range photogrammetry (CRP) was used to measure the self-load deformations of the SRT primary reflector from its optimal shape, which are requested to be minimized for the radio telescope to operate at full efficiency. In the attempt to achieve such performance, we conceived a near real-time CRP system which requires the cameras to be installed in fixed positions and at the same time to avoid any interference with the antenna operativeness. The design of such system is not a trivial task, and to assist our decision we therefore developed a simulation pipeline to realistically reproduce and evaluate photogrammetric surveys of large structures. The described simulation environment consists of (i) a detailed description of the SRT model, included the measurement points and the camera parameters, (ii) a tool capable of generating realistic images accordingly to the above model, and (iii) a self-calibrating bundle adjustment to evaluate the performance in terms of RMSE of the camera configurations

Effects of intertrochanteric varus osteotomy on norberg angle and percent coverage of the femoral head in displastic dogs

This study was conducted to assess the effects of femoral varus osteotomy on joint congruency in dogs affected by early stage hip dysplasia. Preoperative planning to move the femoral head within the acetabulum was carried out. Varisation of the femoral inclination angle (fIA) was achieved by Intertrochanteric Osteotomy (ITO). Norberg angle (NA), percent coverage (PC) of the femoral head by the acetabulum and fIA was measured from preoperative, immediate postoperative and first and second recheck radiographs of seven dogs that underwent an ITO (joint n = 9). There was significant (p < 0.05) improvement of both NA and PC in all patients as indicated by a change in the mean \ub1 standard deviation of 78.9\ub0 \ub1 7.5 and 36.9% \ub1 5.2 to 92.2\ub0 \ub1 6.7 and 50.6% \ub1 8.3, respectively. No significant difference (p < 0.05) was observed between the values of the planned femoral inclination angle (pfIA) of the femur and the effective femoral inclination angle (efIA) obtained after surgery (115.9\ub0 \ub1 2.5 and 111.3\ub0 \ub1 6.4, respectively). These findings could encourage the use of ITO in veterinary practice and indicate that intertrochanteric varus osteotomy should be re-considered for the treatment of early stage hip dysplasia in dogs with radiological signs of joint incongruenc

Relationships between size and abundance in beach plastics: A power-law approach

Sandy beaches are one of the most relevant coastal environments in terms of socio-ecological and economical value. So, the presence and accumulation of plastic litter determines a degradation of these values, and calls for management actions for cleaning are required. In this research, we investigated the features of plastic litter distribution on a Mediterranean beach in relation to size and abundance of the sampled items. Simple allometric models were applied with the aim to provide a parsimonious tool for estimating the amount and sizes of the beach plastic litter. The results show effective relations between size and abundance of plastic items according to the power-law distribution. This relationship could support decision-makers to estimate the total amount of beach plastics through the application of a simple model instead of more complex models requiring the estimation of many parameters and the availability of large datasets

Au/ZrO2 catalysts for LT-WGSR: active role of sulfates during gold deposition

Two studies examined the effect of acculturation-contact discrepancies on well-being. Specifically, we tested the prediction that well-being will be compromised when cultural minorities' acculturation preferences are not met by the intergroup and intragroup contact in a new society. Study 1 found that for Polish immigrants (n=55) acculturation-contact discrepancies were associated with compromised well-being. Study 2 followed a cohort of international students (n=106) for a period of two academic years. Results suggested that discrepancies in students' acculturation-contact in their first year had harmful consequences for their well-being 1 year later. Overall, the two studies show that discrepancies between acculturation preferences and actual contact have negative implications for the psychological adaptation of acculturating individuals.info:eu-repo/semantics/publishedVersio

Tests of a cooling system for thin targets submitted to intense ion beams for the numen experiment

The NUMEN experiment, hosted at LNS (Catania, Italy), aims to determine the Nuclear Matrix Elements (NMEs) involved in 0β β decay via heavy-ion induced Double Charge Exchange (DCE) reactions. High intensity beams of about 50 μA and of energies ranging from 15 to 60 MeV/u are necessary, due to the low DCE cross sections and the use of very thin targets (several hundreds of nm) needed to reach the required energy resolution. These intense beams produce a considerable amount of heat inside the target, which can be dissipated by depositing the targets on a highly thermally conductive substrate, HOPG (Highly Oriented Pyrolytic Graphite), and coupling it with a suitable designed target-cooler system. The heat transfer from the beam spot to the cold region has been studied by solving numerically the heat equation to determine the evolution in space and time of the temperature inside the target. According to calculations, the temperatures of most of the target isotopes remain under the melting points. Experimental tests with a laser were initiated to validate the whole cooling system and the calculations