High Resolution RPC's for Large TOF Systems

Here we report on a particular type of RPC that presents up to 99% efficiency for minimum ionizing particles and a very sharp time resolution, below 50 ps sigma in the most optimized conditions. Our 9 cm2 cells, made with glass and metal electrodes that form accurately spaced gaps of a few hundred micrometers, are operated at atmospheric pressure in non-flammable gases and can be economically produced in large quantities, opening perspectives for the construction of large area time of flight systems.Comment: 10 pages, 8 figure

Uncovering the kiloparsec-scale stellar ring of NGC5128

We reveal the stellar light emerging from the kiloparsec-scale, ring-like structure of the NGC5128 (Centaurus A) galaxy in unprecedented detail. We use arcsecond-scale resolution near infrared images to create a "dust-free" view of the central region of the galaxy, which we then use to quantify the shape of the revealed structure. At the resolution of the data, the structure contains several hundreds of discreet, point-like or slightly elongated sources. Typical extinction corrected surface brightness of the structure is K_S = 16.5 mag/arcsec^2, and we estimate the total near infrared luminosity of the structure to be M = -21 mag. We use diffraction limited (FWHM resolution of ~ 0.1", or 1.6 pc) near infrared data taken with the NACO instrument on VLT to show that the structure decomposes into thousands of separate, mostly point-like sources. According to the tentative photometry, the most luminous sources have M_K = -12 mag, naming them red supergiants or relatively low-mass star clusters. We also discuss the large-scale geometry implied by the reddening signatures of dust in our near infrared images.Comment: 5 pages, 4 figures, accepted for publication in A&A Letters. A version with high resolution images can be downloaded from http://www.helsinki.fi/~jtkainul/CenALette

A large area timing RPC prototype for ion collisions in the HADES spectrometer

We present a resistive plate chamber (RPC) prototype for time-of-flight measurements over large areas and at high occupancies, minimizing the inter-channel cross-talk.http://www.sciencedirect.com/science/article/B6TJM-4D75GPD-9/1/a6fe40c114a867a0f98e2fec0f13350

New WC-Cu composites for the divertor in fusion reactors

ABSTRACT: The requirements for the divertor components of future fusion reactors are challenging and therefore a stimulus for the development of new materials. In this paper, WC-Cu composites are studied for use as thermal barrier between the plasma facing tungsten tiles and the copper-based heat sink of the divertor. Composite materials with 50% vol. WC were prepared by hot pressing and characterized in terms of microstructure, density, expansion coefficient, elastic modulus, Young's modulus and thermal diffusivity. The produced materials consisted of WC particles homogeneously dispersed in a Cu matrix with densifications between 88% and 98%. The sample with WC particles coated with Cu evidenced the highest densification. The thermal diffusivity was significantly lower than that of pure copper or tungsten. The sample with higher densification exhibits a low value of Young's modulus (however, it is higher compared to pure copper), and an average linear thermal expansion coefficient of 13.6 x 10(-6) degrees C-1 in a temperature range between 100 degrees C and 550 degrees C. To estimate the behaviour of this composite in actual conditions, a monoblock of the divertor in extreme conditions was modelled. The results predict that while the use of WC-Cu interlayer leads to an increase of 190 degrees C on the temperature of the upper part of the monoblock when compared to a pure Cu interlayer, the composite will improve and reduce significantly the cold-state stress between this interlayer and the tungsten.info:eu-repo/semantics/publishedVersio

A four gap glass RPC time-of-flight array with 90 ps time resolution

In this work we describe the performance of a prototype developped in the context of the ALICE team-of-flight R&D system. The detector module consists of a 32-channel array of 3 x 3 cm2 glass-RPC cells, each of which has four accurately spaced gaps of 0.3. mm thickness arranged as a pair of double-gap resistive plate chambers. Operated with a non-flammable gas mixture at atmospheric pressure, the system achieved a time resolution of 90 ps at 90% efficiency with good uniformity and moderate crosstalk. This result shows the feasibility of large-area, high resolution time-of-flight systems based on RPCs at affordable cost

Mechanical construction and installation of the ATLAS tile calorimeter

This paper summarises the mechanical construction andinstallation of the Tile Calorimeter for the ATLASexperiment at the Large Hadron Collider in CERN, Switzerland. The TileCalorimeter is a sampling calorimeter using scintillator as the sensitivedetector and steel as the absorber and covers the central region of the ATLASexperiment up to pseudorapidities ±1.7. The mechanical construction ofthe Tile Calorimeter occurred over a periodof about 10 years beginning in 1995 with the completionof the Technical Design Report and ending in 2006 with the installationof the final module in the ATLAS cavern. Duringthis period approximately 2600 metric tons of steel were transformedinto a laminated structure to form the absorber of the sampling calorimeter.Following instrumentation and testing, which is described elsewhere, themodules were installed in the ATLAS cavern with a remarkable accuracy fora structure of this size and weight.Peer Reviewe

A continuous integration and web framework in support of the ATLAS publication process

The ATLAS collaboration defines methods, establishes procedures, and organises advisory groups to manage the publication processes of scientific papers, conference papers, and public notes. All stages are managed through web systems, computing programs, and tools that are designed and developed by the collaboration. A framework called FENCE is integrated into the CERN GitLab software repository, to automatically configure workspaces where each analysis can be documented by the analysis team and managed by the relevant coordinators. Continuous integration is used to guide the writers in applying consistent and correct formatting when preparing papers to be submitted to scientific journals. Additional software assures the correctness of other aspects of each paper, such as the lists of collaboration authors, funding agencies, and foundations. The framework and the workflow therein provide automatic and easy support to the researchers and facilitates each phase of the publication process, allowing authors to focus on the article contents. The framework and its integration with the most up to date and efficient tools has consequently provided a more professional and efficient automatized work environment to the whole collaboration.ATLAS Collaboration for the support provided to achieve the results described in this paper. We are grateful to ATLAS collaborators who provided invaluable comments and input to the paper and the framework it presents. Special acknowledgements go to Marzio Nessi for helping initiate the Glance project in ATLAS and for supporting its development, and to Kathy– 20 –Pommes for supervising the Glance team at CERNinfo:eu-repo/semantics/publishedVersio

A Four-Gap Glass-RPC Time-of-Flight Array with 90 ps Time Resolution

In this paper, we describe the performance of a prototype developed in the context of the ALICE time-of-flight research and development system. The detector module consists of a 32-channel array of 3 x 3 cm2 glass resistive plate chamber (RPC) cells, each of which has four accurately space gaps of 0.3 mm thickness arranged as a pair of double-gap resisitive plate chambers. Operated with a nonflammable gas mixture at atmospheric pressure, the system achieved a time resolution of 90 ps at 98% efficiency with good uniformity and moderate crosstalk. This result shows the feasibility of large-area high-resolution time-of-flight systems based on RPCs at affordable cost