Influence of the composition on the environmental impact of a casting magnesium alloy

The influence of the composition of magnesium alloys on their environmental impact was analyzed. In order to perform a more accurate environmental impact calculation, life cycle assessment (LCA) with the ReCiPe 2016 Endpoint and IPCC 2013 GWP (100 y) methodology was used, taking the EcoInvent AZ91 magnesium alloy dataset as reference. This dataset has been updated with the material composition range of several alloys included in the European standard EN 1753:2019. The balanced, maximum, and minimum environmental impact values were obtained. In general, the overall impact of the studied magnesium alloys varied from 3.046 Pt/kg to 4.853 Pt/kg and from 43.439 kg CO2 eq./kg to 55.427 kg CO2 eq./kg, depending on the composition. In the analysis of maximum and minimum environmental impacts, the alloy that had the highest uncertainty was 3.5251, with a range of ±7.20%. The element that contributed the most to increase its impact was silver. The AZ91 alloy, provided by the EcoInvent dataset, had a lower environmental impact than all the magnesium alloys studied in this work. The content of critical raw materials (CRMs) was also assessed, showing a high content in CRMs, between 89.72% and 98.22%

The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66

The design of assembly components requires special attention to aspects related to their dimensions to ensure their functionality. The goal of this paper is to analyse the influence of case-based environmental conditions, including extreme hydrothermal conditions, on the dimensional stability of a component made from different polyamides throughout the component''s working life. The results support the conclusion that components made from PA6 have a higher capacity to absorb humidity than those made from PA66 and, on the other hand, a higher capacity to lose this humidity, which implies a more significant effect on the average error in the dimensions considered (12% for PA6 in comparison to 3% for PA66). With regard to assembly dimensions, components remain within dimensional tolerances under average and extreme humidity conditions and average temperature conditions. Components injected with P66 are more stable for all of the situations analysed

Dimensional Stability and Process Capability of an Industrial Component Injected with Recycled Polypropylene

The usage of recycled polymers for industrial purposes arises as one of the most promising methods of reducing environmental impact and costs associated with scrapping parts. This paper presents a systematic study of the dimensional stability of a raw and 100% recycled polypropylene subjected to realistic environmental conditions occurring along its working life. The component studied is an internal part of an induction hob assembly. Industrial samples manufactured with both materials, in the same mold, and in the same injection machine, are subjected to ejection conditions, storage conditions (50 °C), and extreme performance conditions (80 °C). Induced dimensional changes are registered and analyzed using a coordinate measuring machine, and a tactile sensing probe. To verify the process capability of the samples manufacturing, Cp and Cpk values are calculated to evaluate the suitability of the recycled material as an alternative. Results conclude that, although the use of recycled material implies slight differences in terms of dimensional stability due to the changes induced in the polymer structure, these differences are not significant enough to affect the injection process capability. Therefore, recycling arises as one effective method to reduce both overruns associated with the consumption of raw polypropylene material and its environmental impact

Biochemical Characterization and Differential Expression of PAL Genes Associated With “Translocated” Peach/Plum Graft-Incompatibility

Grafting is an ancient plant propagation technique widely used in horticultural crops, particularly in fruit trees. However, the involvement of two different species in grafting may lead to lack of affinity and severe disorders between the graft components, known as graft-incompatibility. This complex agronomic trait is traditionally classified into two categories: “localized” (weak graft unions with breaks in cambial and vascular continuity at the graft interface and absence of visual symptoms in scion leaves and shoots) and “translocated” (degeneration of the sieve tubes and phloem companion cells at the graft interface causing translocation problems in neighboring tissues, and reddening/yellowing of scion leaves). Over the decades, more attention has been given to the different mechanisms underlying the “localized” type of graft-incompatibility; whereas the phenylpropanoid-derived compounds and the differential gene expression associated with the “translocated” graft-incompatibility remain unstudied. Therefore, the aim of this study was to shed light on the biochemical and molecular mechanisms involved in the typical “translocated” graft-incompatibility of peach/plum graft-combinations. In this study, the “Summergrand” (SG) nectarine cultivar was budded on two plum rootstocks: “Adara” and “Damas GF 1869”. “Translocated” symptoms of incompatibility were shown and biochemically characterized in the case of “SG/Damas GF 1869” graft-combination, 3 years after grafting. Non-structural carbohydrates (soluble sugars and starch), phenolic compounds and antioxidant activity, were significantly enhanced in the incompatible graft-combination scion. Similarly, the enzymatic activities of the antioxidant enzyme peroxidase, the phenylalanine ammonia-lyase (PAL) and polyphenol oxidase involved in the phenylpropanoid pathway were significantly affected by the incompatible rootstock “Damas GF 1869”, inducing higher activities in the scion than those induced by the compatible rootstock “Adara”. In addition, a positive and strong correlation was obtained between total phenol content, antioxidant capacity and the expression of the key genes involved in the phenylpropanoid pathway, PAL1 and PAL2. Regarding the “SG/Adara” graft-combination, there were neither external symptoms of “translocated” incompatibility nor significant differences in the biochemical and molecular parameters between scion and rootstock, proving it to be a compatible combination. The differential expression of PAL genes together with the biochemical factors cited above could be good markers for the “translocated” peach/plum graft-incompatibility.

Volatile compounds contribution of Hanseniaspora guilliermondii and Hanseniaspora uvarum during red wine vinifications

This work aims to investigate the contribution of a selected non-Saccharomyces yeast species, Hanseniaspora guilliermondii, to higher alcohols, esters, fatty acids and heavy sulphur compounds composition of red wine. Red grape must vinifications of 100 l were performed and an inoculated fermentation with H. guilliermondii was compared to a spontaneous fermentation. The presence of apiculate yeasts was observed in both fermentations; however, Hanseniaspora uvarum was the only apiculate yeast isolated from the spontaneous fermentation. Apiculate yeasts dominated the fermentation until an ethanol concentration of 6% (v/v) was attained and remained in considerable high levels for an ethanol concentration of 12.5% (v/v). The grape must inoculated with H. guilliermondii led to the production of wine with higher concentrations of 1-propanol, 2-phenylethyl acetate and 3-(methylthio)propionic acid, and lower amounts of ethyl hexanoate, pentanoic acid, free fatty acids, 2-methyltetrahydrothiophen-3- one and acetic acid-3-(methylthio)propyl ester, than wine resulting from the spontaneous fermentation. The present study shows that the use of specific apiculate yeasts in grape must fermentations may lead to the production of wines with different chemical profiles, emphasising the importance of Hanseniaspora yeasts as mixed starter cultures with Saccharomyces cerevisiae, in winemaking.info:eu-repo/semantics/acceptedVersio

3D-Printing of zirconia dental prostheses

Abstract in proceedings of the Fourth International Congress of CiiEM: Health, Well-Being and Ageing in the 21st Century, held at Egas Moniz’ University Campus in Monte de Caparica, Almada, from 3–5 June 2019.This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.info:eu-repo/semantics/publishedVersio

Effectiveness of two intracanal dressings in adult portuguese patients: a qPCR and anaerobic culture assessment

Aim: To quantify bacterial equivalents before and after chemomechanical preparation using 3% sodium hypochlorite (NaOCl) and intracanal dressing with calcium hydroxide paste (Ca(OH)2 ) or 2% Chlorhexidine digluconate gel (CHX) in necrotic pulps associated or not with apical periodontitis and to further compare this quantification with counts of anaerobic microorganisms. Methodology: Prospective clinical trial in 69 single-rooted adult teeth (strict inclusion criteria); CHX group: 34; Ca(OH)2 group: 35. Bacteria samples were taken at baseline (S1), after chemomechanical preparation (S2) and after 14 days of intracanal dressing (S3). Bacterial equivalents were assessed by broad-range real-time polymerase chain reaction (qPCR), and live viable bacteria measured with conventional anaerobic culture (CFU/mL). Descriptive/inferential analysis was performed with spss vs. 20.0 (α = 0.05) using the Kruskal-Wallis, Mann-Whitney and chi-squared tests and Spearman's correlation coefficients. Results: Both groups showed a significant decrease between S1 and S2 (Mann-Whitney U-test; P < 0.001) both in qPCR and in culture. In the Ca(OH)2 -group, no variation was observed between S2 and S3 by qPCR and culture. In contrast, the CHX group showed a significant increase from S2 to S3 by both techniques. The two groups were only significantly different in S3 (Mann-Whitney U-test; P ≤ 0.001), with a worse performance in the CHX group. Again, these results were congruent by both approaches. Data from both approaches correlate reasonably (rS < 0.5). Conclusions: Infected root canals contained a high bacterial load, and the chemomechanical root canal preparation reduced bacterial equivalents by 99.1% and anaerobic counts by 98.5%. Intracanal dressings were not efficient at reducing bacterial load, but the 14-day intracanal dressing with Ca(OH)2 performed significantly better than CHX, particularly in cases with apical periodontitis.info:eu-repo/semantics/publishedVersio

Dance on: a mixed-method study into the feasibility and effectiveness of a dance programme to increase physical activity levels and wellbeing in adults and older adults

Background Physical activity (PA) has beneficial effects on physical and mental health outcomes in older adults. However, a consistent decline in PA participation has been noted with increasing age, with older adults consistently being reported as the least physically active population. Previous evidence showed that dance is an appropriate form of PA in older adults as it integrates the body’s movement with physical, cognitive, and social elements. This study investigated the feasibility and efficacy of a weekly dance programme over a 12-month period on PA levels and wellbeing. Methods A mixed-method intervention design was used. Community-dwelling older adults aged 55 + years were recruited from local community groups in Yorkshire (UK). The programme comprised of a 60-min mixed genre dance class per week. Changes with carried forward data in self-reported measures of PA (min/week) and wellbeing with EuroQol visual analogue scale (EQ VAS) across four different time points (baseline, 3, 6 and 12 months) were assessed using the Friedman test. Feasibility was also assessed through class attendance and focus groups (N = 6–9) with participants. A thematic analysis of qualitative data was conducted. Results A total of 685 participants (589–89.1% females and 72–10.9% males) took part in the study. The mean age was 75 ± 10 years, and 38% of the participants were classed as highly deprived as per the index of multiple deprivation. There was a statistically significant increase in both PA (X2(3) = 192.42, P < 0.001) and EQ VAS scores across the four time points (X2(3) = 19.66, P < 0.001). The mean adherence rate was consistent across the 12-month period of intervention (70%). Themes from the focus groups included reasons for participating in the programme, perceptions of how the dance programme affected the participants, and facilitators to participation in the programme. Conclusions The good adherence and favourability indicate that the dance programme is feasible as an intervention in community-dwelling participants from socially economically diverse communities. The dance intervention showed a positive effect on PA levels and wellbeing. A randomised-controlled trial with a control group is required to test this intervention further