Targeted monitoring for human pharmaceuticals in vulnerable source and final waters

A range of pharmaceuticals has been detected in soils, surface waters and groundwaters across the world. While the reported concentrations are generally low (i.e. sub μg l-1 in surface waters), the substances have been observed throughout the year across a variety of hydrological, climatic and land-use settings. As a result, questions have been raised over the potential for pharmaceuticals in surface waters to enter drinking water supplies and to affect consumers. In a previous Drinking Water Inspectorate (DWI) funded study, results from a simple exposure model were used alongside information on therapeutic doses of pharmaceuticals to identify pharmaceuticals that are likely to be of most concern in UK drinking water sources. However, this previous study was entirely desk-based and did not involve any experimental measurements of pharmaceutical concentrations. The current study was therefore performed to generate actual measurements on the occurrence of pharmaceuticals in source and treated waters in England. The study considered a range of pharmaceutical compounds and their metabolites that have either a) high predicted exposure concentrations; b) toxicological concerns; or c) a low predicted exposure to therapeutic dose ratio. An illicit drug and its major metabolite were also investigated. The study compounds (in total 17) covered a range of chemical classes and varied in terms of their physico-chemical properties. The study was done at four sites where concentrations in source water at the drinking water treatment abstraction point were predicted to be some of the greatest in England. The study therefore is likely to provide a ‘worst case’ assessment of potential human exposure to pharmaceuticals in drinking water in England and Wales. Ten of the 17 study compounds were detected in untreated source waters at sub-μg/l concentrations. Six of these compounds (namely, benzoylecgonine (a metabolite of cocaine), caffeine, carbamazepine (an antiepileptic medicine), carbamazepine epoxide (a metabolite of carbamazepine), ibuprofen and naproxen (both non-steroidal anti-inflammatory drugs) were also detected in treated drinking water. With the exception of carbamazepine epoxide, concentrations in treated drinking water were generally significantly lower than in source water. Even though England is a densely populated country and in some regions there is limited dilution of wastewater effluents, these observations, made at sites that were predicted to have some of the highest concentrations of pharmaceuticals in England and Wales, are in line with results from similar studies performed in other countries. Comparison of measured concentrations of the study compounds in drinking waters with information on therapeutic doses demonstrated that levels of these compounds in drinking water in England are many orders of magnitude lower than levels that are given to patients therapeutically. It would therefore appear that the low or non-detectable levels of pharmaceuticals and illicit drugs present in drinking waters in England and Wales do not pose an appreciable risk to human health

Comparison of calculated and measured pressures on straight and swept-tip model rotor blades

Using the quasi-steady, full potential code, ROT22, pressures were calculated on straight and swept tip model helicopter rotor blades at advance ratios of 0.40 and 0.45, and into the transonic tip speed range. The calculated pressures were compared with values measured in the tip regions of the model blades. Good agreement was found over a wide range of azimuth angles when the shocks on the blade were not too strong. However, strong shocks persisted longer than predicted by ROT22 when the blade was in the second quadrant. Since the unsteady flow effects present at high advance ratios primarily affect shock waves, the underprediction of shock strengths is attributed to the simplifying, quasi-steady, assumption made in ROT22

Continuum approach to wide shear zones in quasi-static granular matter

Slow and dense granular flows often exhibit narrow shear bands, making them ill-suited for a continuum description. However, smooth granular flows have been shown to occur in specific geometries such as linear shear in the absence of gravity, slow inclined plane flows and, recently, flows in split-bottom Couette geometries. The wide shear regions in these systems should be amenable to a continuum description, and the theoretical challenge lies in finding constitutive relations between the internal stresses and the flow field. We propose a set of testable constitutive assumptions, including rate-independence, and investigate the additional restrictions on the constitutive relations imposed by the flow geometries. The wide shear layers in the highly symmetric linear shear and inclined plane flows are consistent with the simple constitutive assumption that, in analogy with solid friction, the effective-friction coefficient (ratio between shear and normal stresses) is a constant. However, this standard picture of granular flows is shown to be inconsistent with flows in the less symmetric split-bottom geometry - here the effective friction coefficient must vary throughout the shear zone, or else the shear zone localizes. We suggest that a subtle dependence of the effective-friction coefficient on the orientation of the sliding layers with respect to the bulk force is crucial for the understanding of slow granular flows.Comment: 11 pages, 7 figure

Identifying the Components and Interrelationships of Smart Cities in Indonesia: Supporting Policymaking via Fuzzy Cognitive Systems

Multiple Indonesian cities currently aim to qualify as “smart cities.” Previous research on defining smart cities (e.g., the implementation-oriented maturity model) tends to focus on components over interrelationships, is challenging to apply to a specific context such as Indonesia, and offers limited support for policy-relevant questions. In this paper, we propose to address these shortcomings to support policymakers in identifying concrete action plans in Indonesia specifically. Our approach clarifies interrelationships for the context of use and supports structural (e.g., what aspects of a “smart city” are impacted by an intervention?) as well as what-if policy questions. We started with a systems\u27 science approach to developing a cognitive map of the components and their interrelationships, as is increasingly done in participatory modeling and particularly in socio-ecological management. We transformed semi-structured interviews of 10 Indonesian experts into maps and assembled them to create the first comprehensive smart cities cognitive map for Indonesia, totaling 52 concepts and 98 relationships. While a cognitive map already provides support for decision-making (e.g., by identifying loops in the system), it is only conceptual and thus cannot form predictions. Consequently, we extended our cognitive map into a fuzzy cognitive map (FCM), whose inference abilities allow to examine the dynamic response of an indicator (e.g., “smart city”) in response to different interventions. As fuzzy cognitive maps include the strengths of interrelationships but not the notion of time, future research may refine our model using system dynamics. This refinement would support policymakers in investigating when to conduct and/or evaluate an intervention

Structural Verification of the First Orbital Wonder of the World - The Structural Testing and Analysis of the International Space Station (ISS)

The International Space Station (ISS) can be considered one of the structural engineering wonders of the world. On par with the World Trade Center, the Colossus of Rhodes, the Statue of Liberty, the Great Pyramids, the Petronas towers and the Burj Khalifa skyscraper of Dubai, the ambition and scope of the ISS structural design, verification and assembly effort is a truly global success story. With its on-orbit life projected to be from its beginning in 1998 to the year 2020 (and perhaps beyond), all of those who participated in its development can consider themselves part of an historic engineering achievement representing all of humanity. The structural design and verification of the ISS could be the subject of many scholarly papers. Several papers have been written on the structural dynamic characterization of the ISS once it was assembled on-orbit [1], but the ground-based activities required to assure structural integrity and structural life of the individual elements from delivery to orbit through assembly and planned on-orbit operations have never been totally summarized. This paper is intended to give the reader an overview of some of the key decisions made during the structural verification planning for the elements of the U.S. On-Orbit Segment (USOS) as well as to summarize the many structural tests and structural analyses that were performed on its major elements. An effort is made for this paper to be summarily comprehensive, but as with all knowledge capture efforts of this kind, there are bound to be errors of omission. Should the reader discover any of these, please feel free to contact the principal author. The ISS (Figure 1) is composed of pre-integrated truss segments and pressurized elements supplied by NASA, the Russian Federal Space Agency (RSA), the European Space Agency (ESA) and the Japanese Aerospace Exploration Agency (JAXA). Each of these elements was delivered to orbit by a launch vehicle and connected to one another either robotically or autonomously. The primary structure of each element was assembled and verified by teams of responsible structural engineers within and among their respective agencies and agency contractors

WISE-2005: prolongation of left ventricular pre-ejection period with 56 days head-down bed rest in women

This study tested the hypothesis that prolonged physical deconditioning affects the coupling of left ventricular depolarization to its ejection (the pre-ejection period, PEPi) and that this effect is minimized by exercise countermeasures. Following assignment to non-exercise (Control) and exercise groups (Exercise), 14 females performed 56 days of continuous head-down tilt bed rest. Measurements of the electrocardiogram (ECG) and stroke volume (Doppler ultrasound) during supine rest were obtained at baseline prior to (Pre) and after (Post) the head-down tilt bed rest (HDBR) period. Compared with Pre, the PEPi was increased following head-down tilt bed rest (main effect, P \u3c 0.005). This effect was most dominant in the Control group [Pre = 0.038 ± 0.06 s (s.d.) versus Post = 0.054 ± 0.011 s; P \u3c 0.001]. In the Exercise group, PEPi was 0.032 ± 0.005 s Pre and 0.038 ± 0.018 s Post; P= 0.08. Neither the QRS interval nor cardiac afterload was modified by head-down tilt bed rest in Control or Exercise groups. Low-dose isoprenaline infusion reversed the head-down tilt bed rest-induced delay in the PEPi. These results suggest that head-down tilt bed rest leads to a delayed onset of systolic ejection following left ventricular depolarization in a manner that is affected little by the exercise countermeasure but is related to Β-adrenergic pathways. The delayed onset of systole following head-down tilt bed rest appears to be related to mechanism(s) affecting contraction of the left ventricle rather than its depolarization. © 2010 The Authors. Journal compilation © 2010 The Physiological Society

VITRUV - Science Cases

VITRUV is a second generation spectro-imager for the PRIMA enabled Very Large Telescope Interferometer. By combining simultaneously up to 8 telescopes VITRUV makes the VLTI up to 6 times more efficient. This operational gain allows two novel scientific methodologies: 1) massive surveys of sizes; 2) routine interferometric imaging. The science cases presented concentrate on the qualitatively new routine interferometric imaging methodology. The science cases are not exhaustive but complementary to the PRIMA reference mission. The focus is on: a) the close environment of young stars probing for the initial conditions of planet formation and disk evolution; b) the surfaces of stars tackling dynamos, activity, pulsation, mass-loss and evolution; c) revealing the origin of the extraordinary morphologies of Planetary Nebulae and related stars; d) studying the accretion-ejection structures of stellar black-holes (microquasars) in our galaxy; e) unveiling the different interacting components (torus, jets, BLRs) of Active Galactic Nuclei; and f) probing the environment of nearby supermassive black-holes and relativistic effects in the Galactic Center black-hole.Comment: 15 pages. The Power of Optical/IR Interferometry: Recent Scientific Results and 2nd Generation VLTI Instrumentation, Allemagne (2005) in pres

Integration of Electrodeposited Ni-Fe in MEMS with Low-Temperature Deposition and Etch Processes

This article presents a set of low-temperature deposition and etching processes for the integration of electrochemically deposited Ni-Fe alloys in complex magnetic microelectromechanical systems, as Ni-Fe is known to suffer from detrimental stress development when subjected to excessive thermal loads. A selective etch process is reported which enables the copper seed layer used for electrodeposition to be removed while preserving the integrity of Ni-Fe. In addition, a low temperature deposition and surface micromachining process is presented in which silicon dioxide and silicon nitride are used, respectively, as sacrificial material and structural dielectric. The sacrificial layer can be patterned and removed by wet buffered oxide etch or vapour HF etching. The reported methods limit the thermal budget and minimise the stress development in Ni-Fe. This combination of techniques represents an advance towards the reliable integration of Ni-Fe components in complex surface micromachined magnetic MEMS