844 research outputs found
Predicting the movements of permanently installed electrodes on an active landslide using time-lapse geoelectrical resistivity data only
If electrodes move during geoelectrical resistivity monitoring and their new positions are not incorporated in the inversion, then the resulting tomographic images exhibit artefacts that can obscure genuine time-lapse resistivity changes in the subsurface. The effects of electrode movements on time-lapse resistivity tomography are investigated using a simple analytical model and real data. The correspondence between the model and the data is sufficiently good to be able to predict the effects of electrode movements with reasonable accuracy. For the linear electrode arrays and 2D inversions under consideration, the data are much more sensitive to longitudinal than transverse or vertical movements. Consequently the model can be used to invert the longitudinal offsets of the electrodes from their known baseline positions using only the time-lapse ratios of the apparent resistivity data. The example datasets are taken from a permanently installed electrode array on an active lobe of a landslide. Using two sets with different levels of noise and subsurface resistivity changes, it is found that the electrode positions can be recovered to an accuracy of 4 % of the baseline electrode spacing. This is sufficient to correct the artefacts in the resistivity images, and provides for the possibility of monitoring the movement of the landslide and its internal hydraulic processes simultaneously using electrical resistivity tomography only
Digital Literacy in English Schools: A Foucauldian Analysis of Policy
The perceived importance of digital literacy has steadily risen in England in recent years. Successive governments have backed initiatives which, no matter the term used for the assorted skill set involving computers, called for greater integration of technology in education. With the introduction of the English National Curriculum in 1988 to its current incarnation in 2016, it is possible to track the achievements and targets that policy makers believe students should meet. During this time, a wave of scepticism surrounding the usefulness of technology-based learning can be found. In response to a recent article by Selwyn & Facer (2014) which calls for more investigation of technology in education from disparate perspectives, this study takes a Foucauldian-based approach to analyse historical and future digital literacy policy in English schools.
After establishing the historical context through a literature review, the policy analysis is structured to address each of the three research questions. Finally, I provide suggestions for how researchers could continue with a similar Foucauldian analysis as I have used in this work.
The Foucauldian framework presented in the Methodology section is advantageous for deconstructing the systems of power and knowledge surrounding policy decisions regarding digital literacy. Noticeably, while discourses relating to digital literacy have been variously embedded, developed and changed through successive governments since 1988, a constant theme is one of normalisation of newly established truths. That is to say, I have seen through this work, how initial claims have gradually been accepted into educational discourse. Throughout this period, however, I have seen how teachers and students have often been blamed if government targets have not been met; targets which seem to have arisen from assumptions about what it means, or should mean to be digitally literate.
Finally, remaining within this Foucauldian framework, suggestions for future policy and predicted technological progressions are given
6C radio galaxies at z~1: The influence of radio power on the alignment effect
Powerful radio galaxies often display enhanced optical/UV continuum emission
and extended emission line regions, elongated and aligned with the radio jet
axis. The expansion of the radio source strongly affects the gas clouds in the
surrounding IGM, and the kinematic and ionization properties of the extended
emission line regions display considerable variation over the lifetime of
individual sources, as well as with cosmic epoch. We present the results of
deep rest-frame UV and optical imaging and UV spectroscopy of high redshift 6C
radio galaxies. The interdependence of the host galaxy and radio source
properties are discussed, considering: (i) the relative contribution of shocks
associated with the expanding radio source to the observed emission line gas
kinematics, and their effect on the ionization state of the gas; (ii) the
similarities and differences between the morphologies of the host galaxies and
aligned emission for a range of radio source powers; and (iii) the influence of
radio power on the strength of the observed alignment effect.Comment: LaTeX, 6 pages, 5 figures, Elsevier Science format. To appear in
"Radio galaxies: past, present & future". eds. M. Jarvis et al., Leiden, Nov
200
Geophysical-geotechnical sensor networks for landslide monitoring
Landslides are often the result of complex, multi-phase processes where gradual deterioration of shear strength
within the sub-surface precedes the appearance of surface features and slope failure. Moisture content increases
and the build-up of associated pore water pressures are invariably associated with a loss of strength, and thus are
a precursor to failure. Consequently, hydraulic processes typically play a major role in the development of
landslides. Geoelectrical techniques, such as resistivity and self-potential are being increasingly applied to study
landslide structure and the hydraulics of landslide processes. The great strengths of these techniques are that they
provide spatial or volumetric information at the site scale, which, when calibrated with appropriate geotechnical
and hydrogeological data, can be used to characterise lithological variability and monitor hydraulic changes in
the subsurface. In this study we describe the development of an automated time-lapse electrical resistivity
tomography (ALERT) and geotechnical monitoring system on an active inland landslide near Malton, North
Yorkshire, UK. The overarching objective of the research is to develop a 4D landslide monitoring system that
can characterise the subsurface structure of the landslide, and reveal the hydraulic precursors to movement. The
site is a particularly import research facility as it is representative of many lowland UK situations in which weak
mudrocks have failed on valley sides. Significant research efforts have already been expended at the site, and a
number of baseline data sets have been collected, including ground and airborne LIDAR, geomorphologic and
geological maps, and geophysical models. The monitoring network comprises an ALERT monitoring station
connected to a 3D monitoring electrode array installed across an area of 5,500 m2, extending from above the
back scarp to beyond the toe of the landslide. The ALERT instrument uses wireless telemetry (in this case
GPRS) to communicate with an office based server, which runs control software and a database management
system. The control software is used to schedule data acquisition, whilst the database management system stores,
processes and inverts the remotely streamed ERT data. Once installed and configured, the system operates
autonomously without manual intervention. Modifications to the ALERT system at this site have included the
addition of environmental and geotechnical sensors to monitor rainfall, ground movement, ground and air
temperature, and pore pressure changes within the landslide. The system is housed in a weatherproof enclosure
and is powered by batteries charged by a wind turbine & solar panels. 3D ERT images generated from the
landslide have been calibrated against resistivity information derived from laboratory testing of borehole core
recovered from the landslide. The calibrated images revealed key aspects of the 3D landslide structure, including
the lateral extent of slipped material and zones of depletion and accumulation; the surface of separation and the
thickness of individual earth flow lobes; and the dipping in situ geological boundary between the bedrock
formations. Time-lapse analysis of resistivity signatures has revealed artefacts within the images that are
diagnostic of electrode movement. Analytical models have been developed to simulate the observed artefacts,
from which predictions of electrode movement have been derived. This information has been used to correct the
ERT data sets, and has provided a means of using ERT to monitor landslide movement across the entire ALERT
imaging area. Initial assessment of seasonal changes in the resistivity signature has indicated that the system is
sensitive to moisture content changes in the body of the landslide, thereby providing a basis for further
development of the system with the aim of monitoring hydraulic precursors to failure
Can behaviour during immunisation be used to identify attachment patterns? A feasibility study
<b>Background</b>
Infant attachment is a strong predictor of mental health, and current measures involve placing children into a stressful situation in order to observe how the child uses their primary caregiver to assuage their distress.<p></p>
<b>Objectives</b>
This study aimed to explore observational correlates of attachment patterns during immunisation.<p></p>
<b>Participants and setting</b>
18 parentâchild pairs were included in the study. They were all recruited through a single general medical practice.<p></p>
<b>Methods</b>
Infant immunisation videos were observed and coded for parenting behaviours as well as pain promoting and pain reducing strategies. Results were compared between different attachment groups, as measured with the Manchester Child Attachment Story Task.
<p></p>
<b>Results</b>
Parents of securely attached children scored higher on positive Mellow Parenting Observational System behaviours, but not at a statistically significant level. Parents of securely attached children were also significantly more likely to engage in pain reducing behaviours (p <0.01) than parents of insecurely attached children.<p></p>
<b>Conclusions</b>
Robust composite measures for attachment informative behaviours in the immunisation situation should be developed and tested in a fully powered study
Predictions for the correlation between giant and terrestrial extrasolar planets in dynamically evolved systems
The large eccentricities of many giant extrasolar planets may represent the
endpoint of gravitational scattering in initially more crowded systems. If so,
the early evolution of the giant planets is likely to be more restrictive of
terrestrial planet formation than would be inferred from the current,
dynamically quiescent, configurations. Here, we study statistically the extent
of the anti-correlation between giant planets and terrestrial planets expected
in a scattering model. We use marginally stable systems of three giant planets,
with a realistic range of planetary masses, as a simple model for the initial
conditions prior to scattering, and show that after scattering the surviving
planets reproduce well the known extrasolar planet eccentricities beyond a >
0.5 AU. By tracking the minimum periastron values of all planets during the
evolution, we derive the distribution of orbital radii across which strong
perturbations (from crossing orbits) are likely to affect low mass planet
formation. We find that scattering affects inner planet formation at orbital
separations less than 50% of the final periastron distance of the innermost
massive planet in approximately 30% of the realizations, and can occasionally
influence planet formation at orbital separations less than 20% of the final
periastron distance of the innermost massive planet. The domain of influence of
the scattering massive planets increases as the mass differential between the
massive planets decreases. Observational study of the correlation between
massive and terrestrial extrasolar planets in the same system has the potential
to constrain the origin of planetary eccentricity.Comment: 8 pages, 8 figures, 1 table, accepted for publication in Ap
Would Functional Agricultural Foods Improve Human Health?
Concern over diet-health relationships has moved to the forefront of public health concerns in the UK and much of the developed world. It has been estimated, for example, that obesity costs the UK National Health Service up to ÂŁ6b per year (Rayner and Scarborough, 2005), but if all consumers were to follow recommended healthy eating guidelines there would be major implications for food consumption, land use and international trade (Srinivasan et al, 2006). This is unlikely to happen, at least in the short term, but it is realistic to anticipate some dietary adjustment toward the recommendations, resulting in an improvement in diet quality (Mazzocchi et al, 2007). Although consumers are reluctant to make major changes to their diets, they may be prepared to substitute existing foods for healthier alternatives. Three of the most prominent nutritional recommendations are to consume more fruit and vegetables, which contain phytochemicals beneficial to health, reduce consumption of saturated fatty acids (SFA) and increase intake of long-chain n-3 fatty acids (FA). In the first case, consumption of fruit and vegetables has been stable at around three 80 g portions per person per day according to the Health Survey for England. It is estimated that 42,200 deaths per year could be avoided in England and 411,000 Quality Adjusted Life Years (QALYs) could be saved if fruit and vegetable consumption were increased to the recommended 5 portions per day (Ofcom 2006). As well as continuing to encourage people to eat more, it could be desirable to âintensifyâ the beneficial phytochemical content of existing fruit and vegetables.Agribusiness, Agricultural and Food Policy, Farm Management, Food Consumption/Nutrition/Food Safety, Industrial Organization,
- âŠ