Factors affecting the chemical efficacy of 2% sodium hypochlorite against oral steady-state dual-species biofilms:Exposure time and volume application

Aim To study the influence of time and volume of 2% sodium hypochlorite (NaOCl) on biofilm removal and to investigate the changes induced on the biofilm architecture. Steady-state, dual-species biofilms of standardized thickness and a realistic contact surface area between biofilms and NaOCl were used. Methodology Streptococcus oralis J22 and Actinomyces naeslundii T14V-J1 biofilms were grown on saliva-coated hydroxyapatite discs within sample holders in the Constant Depth Film Fermenter (CDFF) for 96 h. Two per cent NaOCl was statically applied for three different time intervals (60, 120 and 300 s) and in two different volumes (20 and 40 mu L) over the biofilm samples. The diffusion-driven effects of time and volume on biofilm disruption and dissolution were assessed with Optical Coherence Tomography (OCT). Structural changes of the biofilms treated with 2% NaOCl were studied with Confocal Laser Scanning Microscopy (CLSM) and Low Load Compression Testing (LLCT). A two-way analysis of variance (2-way anova) was performed, enabling the effect of each independent variable as well as their interaction on the outcome measures. Results Optical coherence tomography revealed that by increasing the exposure time and volume of 2% NaOCl, both biofilm disruption and dissolution significantly increased. Analysis of the interaction between the two independent variables revealed that by increasing the volume of 2% NaOCl, significant biofilm dissolution could be achieved in less time. Examination of the architecture of the remaining biofilms corroborated the EPS-lytic action of 2% NaOCl, especially when greater volumes were applied. The viscoelastic analysis of the 2% NaOCl-treated biofilms revealed that the preceding application of higher volumes could impact their subsequent removal. Conclusions Time and volume of 2% NaOCl application should be taken into account for maximizing the anti-biofilm efficiency of the irrigant and devising targeted disinfecting regimes against remaining biofilms

Chemical and mechanical influence of root canal irrigation on biofilm removal from lateral morphological features of simulated root canals, dentine discs and dentinal tubules

Aim To investigate the anti-biofilm efficacy of irrigation using a simulated root canal model, the chemical effect of irrigants against biofilms grown on dentine discs and their impact on biofilm viscoelasticity, the efficacy of the irrigants in decontaminating infected dentinal tubules and the capacity of bacteria to regrow. Methodology Biofilm removal, viscoelastic analysis of remaining biofilms and bacterial viability were evaluated using a simulated root canal model with lateral morphological features, dentine discs and a dentinal tubule model, respectively. Experiments were conducted using a two-phase irrigation protocol. Phase 1: a modified salt solution (RISA) and sodium hypochlorite (NaOCl) were used at a low flow rate to evaluate the chemical action of the irrigants. Ultrasonic activation (US) of a chemically inert solution (buffer) was used to evaluate the mechanical efficacy of irrigation. Phase 2: a final irrigation with buffer at a high flow rate was performed for all groups. Optical coherence tomography (OCT), low load compression testing (LLCT) and confocal scanning laser microscopy analysis were used in the different models. One-way analysis of variance (anova) was performed for the OCT and LLCT analysis, whilst Kruskal-Wallis and Wilcoxon ranked tests for the dentinal tubule model. Results US and high flow rate removed significantly more biofilm from the artificial lateral canal. For biofilm removal from the artificial isthmus, no significant differences were found between the groups. Within-group analysis revealed significant differences between the steps of the experiment, with the exception of NaOCl. For the dentine discs, no significant differences regarding biofilm removal and viscoelasticity were detected. In the dentinal tubule model, NaOCl exhibited the greatest anti-biofilm efficacy. Conclusions The mechanical effect of irrigation is important for biofilm removal. An extra high flow irrigation rate resulted in greater biofilm removal than US in the artificial isthmus. The mechanical effect of US seemed to be more effective when the surface contact biofilm-irrigant was small. After the irrigation procedures, the remaining biofilm could survive after a 5-day period. RISA and NaOCl seemed to alter post-treatment remaining biofilms

The influence of time and irrigant refreshment on biofilm removal from lateral morphological features of simulated root canals

Aim: To evaluate the effect of irrigant refreshment and exposure time of a 2% sodium hypochlorite solution (NaOCl) on biofilm removal from simulated lateral root canal spaces using two different flow rates. Methodology: A dual-species biofilm was formed by a Constant Depth Film Fermenter (CDFF) for 96 h in plug inserts with anatomical features resembling an isthmus or lateral canal-like structures. The inserts were placed in a root canal model facing the main canal. NaOCl 2% and demineralized water (control group) were used as irrigant solutions. Both substances were applied at a flow rate of 0.05 and 0.1 mL s−1. The samples were divided into three groups with zero, one or two refreshments in a total exposure time of 15 min. A three-way analysis of variance (anova) was performed to investigate the interaction amongst the independent variables and the effect of consecutive irrigant refreshment on percentage of biofilm removal. A Tukey post hoc test was used to evaluate the effect of each independent variable on percentage biofilm removal in the absence of statistically significant interactions. Results: For the lateral canal, NaOCl removed significantly more biofilm irrespective of the number of refreshments and exposure time (P = 0.005). There was no significant effect in biofilm removal between the consecutive irrigant refreshments measured in the same biofilm. For the isthmus, NaOCl removed significantly more biofilm irrespective of the number of refreshments and exposure time; both NaOCl and a high flow rate removed significantly more biofilm when the exposure time was analysed (P = 0.018 and P = 0.029, respectively). Evaluating the effect of consecutive irrigant refreshment on the same biofilm, 2% NaOCl, 0.1 mL s−1 flow rate and one or two refreshments removed significant more biofilm (P = 0.04, 0.034 and 0.003, <0.001, respectively). Conclusions: In this model, refreshment did not improve biofilm removal from simulated lateral root canal spaces. NaOCl removed more biofilm from the lateral canal- and isthmus-like structure. A higher flow rate removed significantly more biofilm from the isthmus-like structure. There was always remaining biofilm left after the irrigation procedures

Biofilm removal from a simulated isthmus and lateral canal during syringe irrigation at various flow rates:a combined experimental and Computational Fluid Dynamics approach

Aim (i) To quantify biofilm removal from a simulated isthmus and a lateral canal in an artificial root canal system during syringe irrigation with NaOCl at different concentrations and delivered at various flow rates (ii) to examine whether biofilm removal is further improved by a final high-flow-rate rinse with an inert irrigant following irrigation with NaOCl. (iii) to simulate the irrigant flow in these areas using a computer model (iv) to examine whether the irrigant velocity calculated by the computer model is correlated to biofilm removal. Methodology Ninety-six artificial root canals with either a simulated isthmus or lateral canal were used. A dual-species in vitro biofilm was formed in these areas using a Constant Depth Film Fermenter. NaOCl at various concentrations (2, 5 and 10%) or adhesion buffer (control) was delivered for 30 s by a syringe and an open-ended needle at 0.033, 0.083, or 0.166 mL s(-1) or passively deposited in the main root canal (phase 1). All specimens were subsequently rinsed for 30 s with adhesion buffer at 0.166 mL s(-1) (phase 2). The biofilm was scanned by Optical Coherence Tomography to determine the percentage of the remaining biofilm. Results were analysed by two 3-way mixed-design ANOVAs (alpha = 0.05). A Computational Fluid Dynamics model was used to simulate the irrigant flow inside the artificial root canal system. Results The flow rate during phase 1 and additional irrigation during phase 2 had a significant effect on the percentage of the remaining biofilm in the isthmus (P = 0.004 and P <0.001). Additional irrigation during phase 2 also affected the remaining biofilm in the lateral canal significantly (P 0.05). Irrigant velocity in the isthmus and lateral canal increased with increasing flow rate and it was substantially correlated to biofilm removal from those areas. Conclusions The irrigant flow rate affected biofilm removal in vitro more than NaOCl concentration. Irrigant velocity predicted by the computer model corresponded with the pattern of biofilm removal from the simulated isthmus and lateral canal

An environmentally benign antimicrobial nanoparticle based on a silver-infused lignin core

Silver nanoparticles have antibacterial properties, but their use has been a cause for concern because they persist in the environment. Here, we show that lignin nanoparticles infused with silver ions and coated with a cationic polyelectrolyte layer form a biodegradable and green alternative to silver nanoparticles. The polyelectrolyte layer promotes the adhesion of the particles to bacterial cell membranes and, together with silver ions, can kill a broad spectrum of bacteria, including Escherichia coli, Pseudomonas aeruginosa and quaternary-amine-resistant Ralstonia sp. Ion depletion studies have shown that the bioactivity of these nanoparticles is time-limited because of the desorption of silver ions. High-throughput bioactivity screening did not reveal increased toxicity of the particles when compared to an equivalent mass of metallic silver nanoparticles or silver nitrate solution. Our results demonstrate that the application of green chemistry principles may allow the synthesis of nanoparticles with biodegradable cores that have higher antimicrobial activity and smaller environmental impact than metallic silver nanoparticles

Approaching the Gamow Window with Stored Ions : Direct Measurement of Xe 124 (p,γ) in the ESR Storage Ring

© 2019 American Physical Society. All rights reserved.We report the first measurement of low-energy proton-capture cross sections of Xe124 in a heavy-ion storage ring. Xe12454+ ions of five different beam energies between 5.5 and 8 AMeV were stored to collide with a windowless hydrogen target. The Cs125 reaction products were directly detected. The interaction energies are located on the high energy tail of the Gamow window for hot, explosive scenarios such as supernovae and x-ray binaries. The results serve as an important test of predicted astrophysical reaction rates in this mass range. Good agreement in the prediction of the astrophysically important proton width at low energy is found, with only a 30% difference between measurement and theory. Larger deviations are found above the neutron emission threshold, where also neutron and γ widths significantly impact the cross sections. The newly established experimental method is a very powerful tool to investigate nuclear reactions on rare ion beams at low center-of-mass energies.Peer reviewedFinal Published versio

Charged Particle Production in Proton-, Deuteron-, Oxygen- and Sulphur-Nucleus Collisions at 200 GeV per Nucleon

The transverse momentum and rapidity distributions of net protons and negatively charged hadrons have been measured for minimum bias proton-nucleus and deuteron-gold interactions, as well as central oxygen-gold and sulphur-nucleus collisions at 200 GeV per nucleon. The rapidity density of net protons at midrapidity in central nucleus-nucleus collisions increases both with target mass for sulphur projectiles and with the projectile mass for a gold target. The shape of the rapidity distributions of net protons forward of midrapidity for d+Au and central S+Au collisions is similar. The average rapidity loss is larger than 2 units of rapidity for reactions with the gold target. The transverse momentum spectra of net protons for all reactions can be described by a thermal distribution with `temperatures' between 145 +- 11 MeV (p+S interactions) and 244 +- 43 MeV (central S+Au collisions). The multiplicity of negatively charged hadrons increases with the mass of the colliding system. The shape of the transverse momentum spectra of negatively charged hadrons changes from minimum bias p+p and p+S interactions to p+Au and central nucleus-nucleus collisions. The mean transverse momentum is almost constant in the vicinity of midrapidity and shows little variation with the target and projectile masses. The average number of produced negatively charged hadrons per participant baryon increases slightly from p+p, p+A to central S+S,Ag collisions.Comment: 47 pages, submitted to Z. Phys.

Chemical efficacy of several NaOCl concentrations on biofilms of different architecture:new insights on NaOCl working mechanisms

Aim To investigate the anti-biofilm efficacy and working mechanism of several NaOCl concentrations on dual-species biofilms of different architecture as well as the changes induced on the architecture of the remaining biofilms. Methodology Streptococcus oralis J22 and Actinomyces naeslundii T14V-J1 were co-cultured under different growth conditions on saliva-coated hydroxyapatite discs. A constant-depth film fermenter (CDFF) was used to grow steady-state, four-day mature biofilms (dense architecture). Biofilms were grown under static conditions for 4 days within a confined space (less dense architecture). Twenty microlitres of buffer, 2-, 5-, and 10% NaOCl were applied statically on the biofilms for 60 s. Biofilm disruption and dissolution, as well as bubble formation, were evaluated with optical coherence tomography (OCT). The viscoelastic profile of the biofilms post-treatment was assessed with low load compression testing (LLCT). The bacteria/extracellular polysaccharide (EPS) content of the biofilms was examined through confocal laser scanning microscopy (CLSM). OCT, LLCT and CLSM data were analysed through one-way analysis of variance (ANOVA) and Tukey's HSD post-hoc test. Linear regression analysis was performed to test the correlation between bubble formation and NaOCl concentration. The level of significance was set at a The experimental hypothesis according to which enhanced biofilm disruption, dissolution and bubble formation were anticipated with increasing NaOCl concentration was generally confirmed in both biofilm types. Distinct differences between the two biofilm types were noted with regard to NaOCl anti-biofilm efficiency as well as the effect that the several NaOCl concentrations had on the viscoelasticity profile and the bacteria/EPS content. Along with the bubble generation patterns observed, these led to the formulation of a concentration and biofilm structure-dependent theory of biofilm removal. Conclusions Biofilm architecture seems to be an additional determining factor of the penetration capacity of NaOCl, and consequently of its anti-biofilm efficiency

Two-proton correlations from 158 AGeV Pb+Pb central collisions

The two-proton correlation function at midrapidity from Pb+Pb central collisions at 158 AGeV has been measured by the NA49 experiment. The results are compared to model predictions from static thermal Gaussian proton source distributions and transport models RQMD and VENUS. An effective proton source size is determined by minimizing CHI-square/ndf between the correlation functions of the data and those calculated for the Gaussian sources, yielding 3.85 +-0.15(stat.) +0.60-0.25(syst.) fm. Both the RQMD and the VENUS model are consistent with the data within the error in the correlation peak region.Comment: RevTeX style, 6 pages, 4 figures, 1 table. More discussion are added about the structure on the tail of the correlation function. The systematic error is revised. To appear in Phys. Lett.

Event-by-event fluctuations of average transverse momentum in central Pb+Pb collisions at 158 GeV per nucleon

We present first data on event-by-event fluctuations in the average transverse momentum of charged particles produced in Pb+Pb collisions at the CERN SPS. This measurement provides previously unavailable information allowing sensitive tests of microscopic and thermodynamic collision models and to search for fluctuations expected to occur in the vicinity of the predicted QCD phase transition. We find that the observed variance of the event-by-event average transverse momentum is consistent with independent particle production modified by the known two-particle correlations due to quantum statistics and final state interactions and folded with the resolution of the NA49 apparatus. For two specific models of non-statistical fluctuations in transverse momentum limits are derived in terms of fluctuation amplitude. We show that a significant part of the parameter space for a model of isospin fluctuations predicted as a consequence of chiral symmetry restoration in a non-equilibrium scenario is excluded by our measurement.Comment: 6 pages, 2 figures, submitted to Phys. Lett.