Fast readout of a single Cooper-pair box using its quantum capacitance

We have fabricated a single Cooper-pair box (SCB) together with an on-chip lumped element resonator. By utilizing the quantum capacitance of the SCB, its state can be read out by detecting the phase of a radio-frequency (rf) signal reflected off the resonator. The resonator was optimized for fast readout. By studying quasiparticle tunneling events in the SCB, we have characterized the performance of the readout and found that we can perform a single shot parity measurement in approximately 50 ns. This is an order of magnitude faster than previously reported measurements.Comment: 7 pages, 5 figure

Photon generation in an electromagnetic cavity with a time-dependent boundary

We report the observation of photon generation in a microwave cavity with a time-dependent boundary condition. Our system is a microfabricated quarter-wave coplanar waveguide cavity. The electrical length of the cavity is varied using the tunable inductance of a superconducting quantum interference device. It is measured in the quantum regime, where the temperature is significantly less than the resonance frequency (~ 5 GHz). When the length is modulated at approximately twice the static resonance frequency, spontaneous oscillations of the cavity field are observed. Time-resolved measurements of the dynamical state of the cavity show multiple stable states. The behavior is well described by theory. Connections to the dynamical Casimir effect are discussed.Comment: 5 pages, 3 Figure

Dynamical transitions and sliding friction in the two-dimensional Frenkel-Kontorova model

The nonlinear response of an adsorbed layer on a periodic substrate to an external force is studied via a two dimensional uniaxial Frenkel-Kontorova model. The nonequlibrium properties of the model are simulated by Brownian molecular dynamics. Dynamical phase transitions between pinned solid, sliding commensurate and incommensurate solids and hysteresis effects are found that are qualitatively similar to the results for a Lennard-Jones model, thus demonstrating the universal nature of these features.Comment: 11 pages, 12 figures, to appear in Phys. Rev.

Distant radio galaxies in the near IR

We are carrying out a program of near IR imaging and spectroscopy of radio galaxies with redshifts of 1.5 and greater. One of its principal goals is to constrain the ages and star formation histories of massive galaxies at early epochs. The radio galaxies are drawn from the survey of 1Jy class sources by McCarthy et al (1989) and McCarthy (1990). The sample contains 18 radio galaxies with redshifts greater than 2 and an additional 10 objects with 1.5 less than z less than 2.0. The redshifts were obtained from long slit spectra with the CTIO 4 m. While the galaxies are quite faint (r approximately = 21-24.5) all have Lyman alpha emission with rest frame equivalent widths of 100 - 1000 A. Multicolor photometry in the g,r,i and J,H,K bands has been obtained with the 2.5-m Du Pont Telescope on Las Campanas and with the Hale 5 m telescope at Palomar. We have recently obtained near IR spectra, using the 4 m telescopes at KPNO and CTIO, of a few objects with the goal of determining the Lyman alpha/H-alpha ratio and hence the reddening

Influence of seating styles on head and pelvic vertical movement symmetry in horses ridden at trot

Detailed knowledge of how a rider’s seating style and riding on a circle influences the movement symmetry of the horse’s head and pelvis may aid rider and trainer in an early recognition of low grade lameness. Such knowledge is also important during both subjective and objective lameness evaluations in the ridden horse in a clinical setting. In this study, inertial sensors were used to assess how different rider seating styles may influence head and pelvic movement symmetry in horses trotting in a straight line and on the circle in both directions. A total of 26 horses were subjected to 15 different conditions at trot: three unridden conditions and 12 ridden conditions where the rider performed three different seating styles (rising trot, sitting trot and two point seat). Rising trot induced systematic changes in movement symmetry of the horses. The most prominent effect was decreased pelvic rise that occurred as the rider was actively rising up in the stirrups, thus creating a downward momentum counteracting the horses push off. This mimics a push off lameness in the hindlimb that is in stance when the rider sits down in the saddle during the rising trot. On the circle, the asymmetries induced by rising trot on the correct diagonal counteracted the circle induced asymmetries, rendering the horse more symmetrical. This finding offers an explanation to the equestrian tradition of rising on the ‘correct diagonal.’ In horses with small pre-existing movement asymmetries, the asymmetry induced by rising trot, as well as the circular track, attenuated or reduced the horse’s baseline asymmetry, depending on the sitting diagonal and direction on the circle. A push off hindlimb lameness would be expected to increase when the rider sits during the lame hindlimb stance whereas an impact hindlimb lameness would be expected to decrease. These findings suggest that the rising trot may be useful for identifying the type of lameness during subjective lameness assessment of hindlimb lameness. This theory needs to be studied further in clinically lame horses

Transverse thermal depinning and nonlinear sliding friction of an adsorbed monolayer

We study the response of an adsorbed monolayer under a driving force as a model of sliding friction phenomena between two crystalline surfaces with a boundary lubrication layer. Using Langevin-dynamics simulation, we determine the nonlinear response in the direction transverse to a high symmetry direction along which the layer is already sliding. We find that below a finite transition temperature, there exist a critical depinning force and hysteresis effects in the transverse response in the dynamical state when the adlayer is sliding smoothly along the longitudinal direction.Comment: 4 pages, 4 figures, to appear in Phys. Rev. Let

Friction Laws for Elastic Nano-Scale Contacts

The effect of surface curvature on the law relating frictional forces F with normal load L is investigated by molecular dynamics simulations as a function of surface symmetry, adhesion, and contamination. Curved, non-adhering, dry, commensurate surfaces show a linear dependency, F proportional to L, similar to dry flat commensurate or amorphous surfaces and macroscopic surfaces. In contrast, curved, non-adhering, dry, amorphous surfaces show F proportional to L^(2/3) similar to friction force microscopes. In our model, adhesive effects are most adequately described by the Hertz plus offset model, as the simulations are confined to small contact radii. Curved lubricated or contaminated surfaces show again different behavior; details depend on how much of the contaminant gets squeezed out of the contact. Also, it is seen that the friction force in the lubricated case is mainly due to atoms at the entrance of the tip.Comment: 7 pages, 5 figures, submitted to Europhys. Let

Fluid flow at the interface between elastic solids with randomly rough surfaces

I study fluid flow at the interface between elastic solids with randomly rough surfaces. I use the contact mechanics model of Persson to take into account the elastic interaction between the solid walls and the Bruggeman effective medium theory to account for the influence of the disorder on the fluid flow. I calculate the flow tensor which determines the pressure flow factor and, e.g., the leak-rate of static seals. I show how the perturbation treatment of Tripp can be extended to arbitrary order in the ratio between the root-mean-square roughness amplitude and the average interfacial surface separation. I introduce a matrix D(Zeta), determined by the surface roughness power spectrum, which can be used to describe the anisotropy of the surface at any magnification Zeta. I present results for the asymmetry factor Gamma(Zeta) (generalized Peklenik number) for grinded steel and sandblasted PMMA surfaces.Comment: 16 pages, 14 figure

Interfacial separation between elastic solids with randomly rough surfaces: comparison of experiment with theory

We study the average separation between an elastic solid and a hard solid with a nominal flat but randomly rough surface, as a function of the squeezing pressure. We present experimental results for a silicon rubber (PDMS) block with a flat surface squeezed against an asphalt road surface. The theory shows that an effective repulse pressure act between the surfaces of the form p proportional to exp(-u/u0), where u is the average separation between the surfaces and u0 a constant of order the root-mean-square roughness, in good agreement with the experimental results.Comment: 6 pages, 10 figure

Self-Policing: Dissemination and Adoption of Police Eyewitness Policies in Virginia

Professional policing organizations emphasize the importance of the adoption of sound police policies and procedures, but traditionally doing so has been left to individual agencies. State and local government typically does not closely regulate police, and neither federal constitutional rulings nor state law typically sets out in any detail the practices that police should follow. Thus, law enforcement agencies must themselves draft and disseminate policy. This paper presents the results of studies used to assess the adoption of eyewitness identification policies by law enforcement agencies in Virginia. Policymakers were focused on this problem because Virginia experienced a series of DNA exonerations in cases involving eyewitness misidentifications. In 2005, lawmakers enacted a law that required agencies to have some written policy in place. However, there was little guidance on what that policy should be. To remedy this problem, the state law enforcement policy agency, the Virginia Department of Criminal Justice Services (DCJS) promulgated, in 2011, a detailed model policy on eyewitness procedure. Nevertheless, as reported in a 2013 study, those model practices were only haltingly adopted. In particular, many agencies did not use blind or blinded lineups, in which the administrator does not know which photo is that of a suspect or cannot view which photo the eyewitness is examining. In Fall 2018, all of the over-three hundred law enforcement agencies in Virginia had their policies on this subject requested, using the state freedom of information law. The results show that there has now been widespread adoption of the DCJS model policy. Improved eyewitness identification practices have been adopted by the vast majority of agencies, including large and small agencies. This Article concludes by asking what contributed to the extensive dissemination of a model police policy, and what its implications are for improving police policy and practice without the use of regulation