Analytical method to measure three-dimensional strain patterns in the left ventricle from single slice displacement data

Background: Displacement encoded Cardiovascular MR (CMR) can provide high spatial resolution measurements of three-dimensional (3D) Lagrangian displacement. Spatial gradients of the Lagrangian displacement field are used to measure regional myocardial strain. In general, adjacent parallel slices are needed in order to calculate the spatial gradient in the through-slice direction. This necessitates the acquisition of additional data and prolongs the scan time. The goal of this study is to define an analytic solution that supports the reconstruction of the out-of-plane components of the Lagrangian strain tensor in addition to the in-plane components from a single-slice displacement CMR dataset with high spatio-temporal resolution. The technique assumes incompressibility of the myocardium as a physical constraint. Results: The feasibility of the method is demonstrated in a healthy human subject and the results are compared to those of other studies. The proposed method was validated with simulated data and strain estimates from experimentally measured DENSE data, which were compared to the strain calculation from a conventional two-slice acquisition. Conclusion: This analytical method reduces the need to acquire data from adjacent slices when calculating regional Lagrangian strains and can effectively reduce the long scan time by a factor of two

Circulatory proteins relate cardiovascular disease to cognitive performance: a Mendelian randomisation study

Background and objectives: Mechanistic research suggests synergistic effects of cardiovascular disease (CVD) and dementia pathologies on cognitive decline. Interventions targeting proteins relevant to shared mechanisms underlying CVD and dementia could also be used for the prevention of cognitive impairment. Methods: We applied Mendelian randomisation (MR) and colocalization analysis to investigate the causal relationships of 90 CVD-related proteins measured by the Olink CVD I panel with cognitive traits. Genetic instruments for circulatory protein concentrations were obtained using a meta-analysis of genome-wide association studies (GWAS) from the SCALLOP consortium (N = 17,747) based on three sets of criteria: 1) protein quantitative trait loci (pQTL); 2) cis-pQTL (pQTL within ±500 kb from the coding gene); and 3) brain-specific cis-expression QTL (cis-eQTL) which accounts for coding gene expression based on GTEx8. Genetic associations of cognitive performance were obtained from GWAS for either: 1) general cognitive function constructed using Principal Component Analysis (N = 300,486); or, 2) g Factor constructed using genomic structural equation modelling (N = 11,263–331,679). Findings for candidate causal proteins were replicated using a separate protein GWAS in Icelanders (N = 35,559). Results: A higher concentration of genetically predicted circulatory myeloperoxidase (MPO) was nominally associated with better cognitive performance (p < 0.05) using different selection criteria for genetic instruments. Particularly, brain-specific cis-eQTL predicted MPO, which accounts for protein-coding gene expression in brain tissues, was associated with general cognitive function (βWald = 0.22, PWald = 2.4 × 10−4). The posterior probability for colocalization (PP.H4) of MPO pQTL with the g Factor was 0.577. Findings for MPO were replicated using the Icelandic GWAS. Although we did not find evidence for colocalization, we found that higher genetically predicted concentrations of cathepsin D and CD40 were associated with better cognitive performance and a higher genetically predicted concentration of CSF-1 was associated with poorer cognitive performance. Conclusion: We conclude that these proteins are involved in shared pathways between CVD and those for cognitive reserve or affecting cognitive decline, suggesting therapeutic targets able to reduce genetic risks conferred by cardiovascular disease

Late Wolstonian and Ipswichian (MIS 6/5e) sediment fill in a limestone sinkhole, Askham Fell, northern England

In 2019 a sinkhole (doline) occurred in Late Devensian till above fissured limestone in northern England. Most sediment plugging the fissure was evacuated down into a karstic drainage system. The residual sedimentary fill comprises three main lithofacies, dated using optically stimulated luminescence to between 170.7 ± 40.0 and 56.1 ± 13.5 ka. The earliest date demonstrates fissures were present in the limestone pavement at the time of Marine Isotope Stage (MIS) 6, or shortly thereafter. The fissure filled with fine sand and silt due to surface runoff and aeolian processes probably at the MIS 6 to MIS 5e transition after Wolstonian glacial ice had retreated. The deposits then collapsed into the karst system. Further fine sand and silt deposition occurred during MIS 3; this deposit filled the central cavity surrounded by residual MIS 6/5e deposits. The sequence was capped by till as Late Devensian (MIS 2) ice transgressed the area. Solution fissures in the karst surfaces of northern England may pre-date the Late Devensian glaciation. Moreover, fissures are repositories of pre-Devensian sediment deposits which survived the Late Devensian glaciation and the Ipswichian interglacial. Such sites should provide information on the nature and timing of pre-Devensian glacial–interglacial events and shed light on basal ice conditions and glaciokarst drainage behaviour

Temporal Response Properties of the Auditory Nerve in Implanted Children with Auditory Neuropathy Spectrum Disorder and Implanted Children with Sensorineural Hearing Loss

This study aimed to 1) characterize temporal response properties of the auditory nerve in implanted children with auditory neuropathy spectrum disorder (ANSD); and 2) compare results recorded in implanted children with ANSD with those measured in implanted children with sensorineural hearing loss (SNHL)

Effects of Stimulation Level and Electrode Pairing on the Binaural Interaction Component of the Electrically Evoked Auditory Brain Stem Response

The purpose of this study was to investigate the effects of stimulation level and electrode pairing on the binaural interaction component (BIC) of the electrically evoked auditory brain stem response (EABR) in Nucleus cochlear implant users

Preliminary Results of the Relationship Between the Binaural Interaction Component of the Electrically Evoked Auditory Brainstem Response and Interaural Pitch Comparisons in Bilateral Cochlear Implant Recipients

The purpose of this study was to investigate the relationship between electrophysiologic measures of the binaural interaction component (BIC) of the electrically evoked auditory brainstem response (EABR) and psychophysical measures of interaural pitch comparisons in Nucleus bilateral cochlear implant users

Demixing, remixing and cellular networks in binary liquids containing colloidal particles

We present a confocal-microscopy study of demixing and remixing in binary liquids containing colloidal particles. First, particle-stabilized emulsions have been fabricated by nucleation and growth of droplets upon cooling from the single-fluid phase. We show that their stability mainly derives from interfacial particles; the surplus of colloids in the continuous phase possibly provides additional stability. Upon heating these emulsions, we have observed the formation of polyhedral cellular networks of colloids, just before the system remixes. Given a suitable liquid-liquid composition, the initial emulsions cross the binary-liquid symmetry line due to creaming. Therefore, upon heating, the droplets do not shrink and they remain closely packed. The subsequent network formation relies on a delicate balance between the Laplace pressure and the pressure due to creaming/remixing. As high concentrations of colloids in the cell walls inhibit film thinning and rupture, the networks can be stabilized for more than 30 minutes. This opens up an avenue for their application in the fabrication of advanced materials.Comment: http://dx.doi.org/10.1039/b918002

Recent progress and emerging application areas for lithium-sulfur battery technology

Electrification is progressing significantly within the present and future vehicle sectors such as large commercial vehicles (e. g. trucks and busses), high altitude long endurance (HALE), high altitude pseudo satellites (HAPS), and electric vertical take‐off and landing (eVTOL). The battery systems performance requirements differ across these applications in terms of power, cycle life, system cost, etc. However, the need for high gravimetric energy density, 400 Wh kg−1 and beyond, is common across them all, since it will enable vehicles to achieve extended range, longer mission duration, lighter weight or increased payload. The system level requirements of these emerging applications can be broken down into the component level developments required to integrate Li‐S technology as the power system of choice. In order to adapt the batteries’ properties, such as energy and power density, to the respective application, the academic research community has a key role to play in component level development. However, materials and component research must be conducted within the context of a viable Li‐S cell system. Herein, the key performance benefits, limitations, modelling and recent progress of the Li‐S battery technology and its adaption towards real world application are discusse