Fabrication and characterisation of electrodeposited and magnertron-sputtered thin films

The MnO–Zn thin films were fabricated by radio frequency (RF) magnetron sputtering and compared with pulse electrodeposition (PED) Zn thin films, doped with MnO and ZrO nanoparticles. Surface morphology, structural properties, chemical composition and corrosion resistance of these coatings were investigated by using scanning electron microscopy, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy, 3-D scanning interferometry and environmental chamber. Surface morphology and degree of crystallinity have different behaviours for different deposition methods. Pulse-coated films have polycrystalline structure with high surface roughness (Ra), whereas sputtered films are monocrystalline with reduced roughness (Ra). Corrosion tests of both RF sputter and PED films revealed that the distribution of corrosion products formed on the surface of sputter films were not severe in extent as in case of electrodeposited coatings. Results showed that the doping of ZrO nano-sized particles in Zn matrix and Mn–Zn composite films significantly improved the corrosion resistance of PED thin films. Keywords: Corrosion resistance, electro-deposition, magnetron sputtering, surface analysis, thin films

Fabrication and characterisation of electrodeposited and magnetron sputtered thin films

The MnO-Zn thin films were fabricated by radio frequency (RF) magnetron sputtering and compared with pulse electrodeposition (PED) Zn thin films, doped with MnO and ZrO nanoparticles. Surface morphology, structural properties, chemical composition and corrosion resistance of these coatings were investigated by using Scanning Electron Microscopic (SEM), X-ray Diffraction (XRD), Energy-dispersive X-ray Spectroscopy (EDS), 3-D Scanning Interferometry and environmental chamber. Surface morphology and degree of crystallinity have different behaviour for differen t deposi tion method. Pulse coated films have polycrystalline structure with high surface roughness (Ra) whereas sputtered films are mono-crystalline with reduced roughness (Ra). Corrosion tests of both RF sputter and PED films revealed that the distribution of corrosion products formed on the surface of sputter films were not severe in extent as in case of electrodeposited coatings. Results showed that the doping of ZrO nano-sized particles in Zn matrix and Mn-Zn composite films significantly improved the corrosion resistance of PED thin films

Dft And X-ray Study Of Structural, Electronic, Elastic And Optical Properties In Be1–xznxs Alloys Depending On Vegard’s Law

Structural, optical and electronic properties and elastic constants of Be1–xZnxS alloys have been studied by employing the commercial code Castep based on density functional theory. The generalized gradient approximation and local density approximation were utilized as exchange correlation. Using elastic constants for compounds, bulk modulus, band gap, Fermi energy and Kramers–Kronig relations, dielectric constants and the refractive index have been found through calculations. Apart from these, X-ray measurements revealed elastic constants and Vegard’s law. It is seen that results obtained from theory and experiments are all in agreement

Enhanced spontaneous emission of CsPbI3 perovskite nanocrystals using a hyperbolic metamaterial modified by dielectric nanoantenna

In this work, we demonstrate, theoretically and experimentally, a hybrid dielectric-plasmonic multifunctional structure able to provide full control of the emission properties of CsPbI3 perovskite nanocrystals (PNCs). The device consists of a hyperbolic metamaterial (HMM) composed of alternating thin metal (Ag) and dielectric (LiF) layers, covered by TiO2 spherical MIE nanoresonators (i.e., the nanoantenna). An optimum HMM leads to a certain Purcell effect, i.e., an increase in the exciton radiative rate, but the emission intensity is reduced due to the presence of metal in the HMM. The incorporation of TiO2 nanoresonators deposited on the top of the HMM is able to counteract such an undesirable intensity reduction by the coupling between the exciton and the MIE modes of the dielectric nanoantenna. More importantly, MIE nanoresonators result in a preferential light emission towards the normal direction to the HMM plane, increasing the collected signal by more than one order of magnitude together with a further increase in the Purcell factor. These results will be useful in quantum information applications involving single emitters based on PNCs together with a high exciton emission rate and intensity

Interpretation of the photoluminescence decay kinetics in metal halide perovskite nanocrystals and thin polycrystalline films

In this paper we present critical analysis of different points of view on interpretation of the photoluminescence (PL) decay kinetics in lead halide perovskites prepared in the form of well passivated nanocrystals (PNCs) or thin polycrystalline layers. In addition to the literature data, our own measurements are also considered. For PNCs, a strong dependence of the PL lifetimes on the type of passivating ligand was observed with a consistently high PL quantum yield. It is shown that such ligand effects, as well as a decrease in the PL lifetime with decreasing temperature, are well qualitatively explained by the phenomenological model of thermally activated delayed luminescence, in which the extension of the PL decay time with temperature occurs due to the participation of shallow non-quenching traps. In the case of thin perovskite layers, we conclude that the PL kinetics under sufficiently low excitation intensity is determined by the excitation quenching on the layer surfaces. We demonstrate that a large variety of possible PL decay kinetics for thin polycrystalline perovskite films can be modelled by means of one-dimensional diffusion equation with use of the diffusion coefficient D and surface recombination velocity S as parameters and conclude that long-lived PL kinetics are formed in case of low D and/or S values

Superradiance Emission and Its Thermal Decoherence in Lead Halide Perovskites Superlattices

Self-assembled nanocrystals (NCs) into superlattices (SLs) are alternative materials to polycrystalline films and single crystals, which can behave very differently from their constituents, especially when they interact coherently with each other. This work concentrates on the Superradiance (SR) emission observed in SLs formed by CsPbBr3 and CsPbBrI2 NCs. Micro-Photoluminescence spectra and transients in the temperature range 4–100 K are measured in SLs to extract information about the SR states and uncoupled domains of NCs. For CsPbBr3 SLs with mostly homogeneous SR lines (linewidth 1–5 meV), this work measures lifetimes as short as 160 ps, 10 times lower than the value measured in a thin film made with the same NCs, which is due to domains of near identical NCs formed by 1000 to 40 000 NCs coupled by dipole–dipole interaction. The thermal decoherence of the SR exciton state is evident above 25 K due to its coupling with an effective phonon energy of ≈8 meV. These findings are an important step toward understanding the SR emission enhancement factor and the thermal dephasing process in perovskite SLs.Financial support from the Spanish Ministry of Science (MICINN) through project no. PID2020- 120484RB-I00 is gratefully acknowledged. G.M.M. also thanks the support from the Spanish MICINN & AEI (project RTI2018-099015-J-I00). I.M.S. thanks the funding of MCIN/AEI/10.13039/501100011033 with the project STABLE PID2019-107314RB-I00. S.G. acknowledges her “Grisolia” grant from Generalitat Valenciana, and G.M.M. thanks the Ramon y Cajal programme (contract RYC2020-030099-I). Thanks are also due to Dr. Raúl Iván Sánchez Alarcón for his help with X-ray diffraction characterization of NC films and SLs

Homogeneous and inhomogeneous broadening in single perovskite nanocrystals investigated by micro-photoluminescence

Metal halides with perovskite crystalline structure have given rise to efficient optoelectronic and photonic devices. In the present work, we have studied the light emission properties of single CsPbBr3 and CsPbI3 semiconductor perovskite nanocrystals (PNCs), as the basis for a statistical analysis of micro-photoluminescence (micro-PL) spectra measured on tens of them. At room temperature, the linewidth extracted from PL spectra acquired in dense films of these nanocrystals is not very different from that of micro-PL measured in single nanocrystals. This means that the homogeneous linewidth due to exciton-phonon interaction is comparable or larger than the inhomogeneous effect associated to the micro-PL peak energy dispersion due to the nanocrystal size distribution defined by the chemical synthesis of the PNCs. Contrarily, we observe very narrow micro-PL lines in CsPbBr3 and CsPbI3 PNCs at 4 K, in the range of 1–5 meV and 0.1–0.5 meV, respectively, because they are limited by spectral diffusion. Aging of PNCs under ambient conditions has been also studied by micro-PL and a clear reduction of their nanocube edge size in the order of the nm/day is deduced

Van Der Waals Heteroepitaxy of GaSe and InSe, Quantum Wells and Superlattices

Bandgap engineering and quantum confinement in semiconductor heterostructures provide the means to fine-tune material response to electromagnetic fields and light in a wide range of the spectrum. Nonetheless, forming semiconductor heterostructures on lattice-mismatched substrates has been a challenge for several decades, leading to restrictions for device integration and the lack of efficient devices in important wavelength bands. Here, we show that the van der Waals epitaxy of two-dimensional (2D) GaSe and InSe heterostructures occur on substrates with substantially different lattice parameters, namely silicon and sapphire. The GaSe/InSe heterostructures were applied in the growth of quantum wells and superlattices presenting photoluminescence and absorption related to interband transitions. Moreover, we demonstrate a self-powered photodetector based on this heterostructure on Si that works in the visible-NIR wavelength range. Fabricated at wafer-scale, these results pave the way for an easy integration of optoelectronics based on these layered 2D materials in current Si technology.Comment: 16 Pages, 5 figures. Supplementary Information included in the end (+10 pages, +10 Figures, + 2 Tables). Partially presented at 21st ICMBE - September 202

Purcell Enhancement and Wavelength Shift of Emitted Light by CsPbI3 Perovskite Nanocrystals Coupled to Hyperbolic Metamaterials

Manipulation of the exciton emission rate in nanocrystals of lead halide perovskites (LHPs) was demonstrated by means of coupling of excitons with a hyperbolic metamaterial (HMM) consisting of alternating thin metal (Ag) and dielectric (LiF) layers. Such a coupling is found to induce an increase of the exciton radiative recombination rate by more than a factor of three due to the Purcell effect when the distance between the quantum emitter and HMM is nominally as small as 10 nm, which coincides well with the results of our theoretical analysis. Besides, an effect of the coupling-induced long wavelength shift of the exciton emission spectrum is detected and modeled. These results can be of interest for quantum information applications of single emitters on the basis of perovskite nanocrystals with high photon emission rates