A novel model of delamination bridging via Z-pins in composite laminates

AbstractA new micro-mechanical model is proposed for describing the bridging actions exerted by through-thickness reinforcement on delaminations in prepreg based composite materials, subjected to a mixed-mode (I–II) loading regime. The model applies to micro-fasteners in the form of brittle fibrous rods (Z-pins) inserted in the through-thickness direction of composite laminates. These are described as Euler–Bernoulli beams inserted in an elastic foundation that represents the embedding composite laminate. Equilibrium equations that relate the delamination opening/sliding displacements to the bridging forces exerted by the Z-pins on the interlaminar crack edges are derived. The Z-pin failure meso-mechanics is explained in terms of the laminate architecture and the delamination mode. The apparent fracture toughness of Z-pinned laminates is obtained from as energy dissipated by the pull out of the through-thickness reinforcement, normalised with respect to a reference area. The model is validated by means of experimental data obtained for single carbon/BMI Z-pins inserted in a quasi-isotropic laminate

Asymmetric Fermi superfluid with different atomic species in a harmonic trap

We study the dilute fermion gas with pairing between two species and unequal concentrations in a harmonic trap using the mean field theory and the local density approximation. We found that the system can exhibit a superfluid shell structure sandwiched by the normal fermions. This superfluid shell structure occurs if the mass ratio is larger then certain critical value which increases from the weak-coupling BCS region to the strong-coupling BEC side. In the strong coupling BEC regime, the radii of superfluid phase are less sensitive to the mass ratios and are similar to the case of pairing with equal masses. However, the lighter leftover fermions are easier to mix with the superfluid core than the heavier ones. A partially polarized superfluid can be found if the majority fermions are lighter, whereas phase separation is still found if they are heavier.Comment: 12 pages, 7 figure

Analysis and evaluation of mechanical performance of reinforced sandwich structures : X-CorTM and K-CorTM

X-CorTM and K-CorTM are foam based lightweight structural cores reinforced with ZFiber ® rods oriented in a truss pattern. They can generate sandwich structures which possess strength- and stiffness-to-weight ratios such to compete with aerospace grade honeycomb constructions. The enhanced tailoring ability to specific design needs, the flexibility in reinforcement type and arrangement, the variety between closed cell foamfilled or hollow core configurations for ultimate weight savings or structural multifunctionality, while utilising manufacturing procedures similar to traditional honeycomb sandwich structures (low cost out-of-autoclave manufacturing techniques included) make these novel materials an attractive alternative. The process of their implementation into current engineering practice requires a parallel comparison with existing competitor cores and a critical evaluation of their performance, identifying advantages and disadvantages. This study represents one of the first attempts to create a rigorous methodology for the analysis and evaluation of their mechanical behaviour and manufacturing sensitivities. The balance of out-of-plane properties (shear and compression), fundamental for a sandwich core material, has been investigated. The material energy absorption capacity for the aforementioned loading cases, as well as for in-plane crushing was evaluated. For this purpose, a new quasi-static test for progressive crushing of flat sandwich laminates was designed successfully. The experimental data gathered validate proposed analytical models which allowed further deductions on core parameters influence to be made. Those parameters were the pin insertion angle, pin lay-out, pin density and the role of the foam. A local-global FE modelling approach for Z-pinned sandwich cores is also provided and validated for X-CorTM structures. Structural differences between XCorTM and K-CorTM are at the base of a diverse mechanical response; their performance is sensitive to the manufacturing process, as it determines the quality of the pin-skin and pin-adhesive film interfaces. An ‘improved’ manufacturing technique designed for XCorTM resulted in a sandwich panel able to offer the same mechanical performance of a Nomex® honeycomb structure for a 25% of weight saving.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Effects of augmented exercise therapy time after stroke: a meta-analysis

<p><b>Background and Purpose:</b> To present a systematic review of studies that addresses the effects of intensity of augmented exercise therapy time (AETT) on activities of daily living (ADL), walking, and dexterity in patients with stroke.</p> <p><b>Summary of Review:</b> A database of articles published from 1966 to November 2003 was compiled from MEDLINE, CINAHL, Cochrane Central Register of Controlled Trials, PEDro, DARE, and PiCarta using combinations of the following key words: stroke, cerebrovascular disorders, physical therapy, physiotherapy, occupational therapy, exercise therapy, rehabilitation, intensity, dose–response relationship, effectiveness, and randomized controlled trial. References presented in relevant publications were examined as well as abstracts in proceedings. Studies that satisfied the following selection criteria were included: (1) patients had a diagnosis of stroke; (2) effects of intensity of exercise training were investigated; and (3) design of the study was a randomized controlled trial (RCT). For each outcome measure, the estimated effect size (ES) and the summary effect size (SES) expressed in standard deviation units (SDU) were calculated for ADL, walking speed, and dexterity using fixed and random effect models. Correlation coefficients were calculated between observed individual effect sizes on ADL of each study, additional time spent on exercise training, and methodological quality. Cumulative meta-analyses (random effects model) adjusted for the difference in treatment intensity in each study was used for the trials evaluating the effects of AETT provided. Twenty of the 31 candidate studies, involving 2686 stroke patients, were included in the synthesis. The methodological quality ranged from 2 to 10 out of the maximum score of 14 points. The meta-analysis resulted in a small but statistically significant SES with regard to ADL measured at the end of the intervention phase. Further analysis showed a significant homogeneous SES for 17 studies that investigated effects of increased exercise intensity within the first 6 months after stroke. No significant SES was observed for the 3 studies conducted in the chronic phase. Cumulative meta-analysis strongly suggests that at least a 16-hour difference in treatment time between experimental and control groups provided in the first 6 months after stroke is needed to obtain significant differences in ADL. A significant SES supporting a higher intensity was also observed for instrumental ADL and walking speed, whereas no significant SES was found for dexterity.</p> <p><b>Conclusion:</b> The results of the present research synthesis support the hypothesis that augmented exercise therapy has a small but favorable effect on ADL, particularly if therapy input is augmented at least 16 hours within the first 6 months after stroke. This meta-analysis also suggests that clinically relevant treatment effects may be achieved on instrumental ADL and gait speed.</p&gt

Violation of the Cauchy-Schwarz inequality with matter waves

The Cauchy-Schwarz (CS) inequality -- one of the most widely used and important inequalities in mathematics -- can be formulated as an upper bound to the strength of correlations between classically fluctuating quantities. Quantum mechanical correlations can, however, exceed classical bounds.Here we realize four-wave mixing of atomic matter waves using colliding Bose-Einstein condensates, and demonstrate the violation of a multimode CS inequality for atom number correlations in opposite zones of the collision halo. The correlated atoms have large spatial separations and therefore open new opportunities for extending fundamental quantum-nonlocality tests to ensembles of massive particles.Comment: Final published version (with minor changes). 5 pages, 3 figures, plus Supplementary Materia

Inherent noise can facilitate coherence in collective swarm motion

Among the most striking aspects of the movement of many animal groups are their sudden coherent changes in direction. Recent observations of locusts and starlings have shown that this directional switching is an intrinsic property of their motion. Similar direction switches are seen in self-propelled particle and other models of group motion. Comprehending the factors that determine such switches is key to understanding the movement of these groups. Here, we adopt a coarse-grained approach to the study of directional switching in a self-propelled particle model assuming an underlying one-dimensional Fokker–Planck equation for the mean velocity of the particles. We continue with this assumption in analyzing experimental data on locusts and use a similar systematic Fokker–Planck equation coefficient estimation approach to extract the relevant information for the assumed Fokker–Planck equation underlying that experimental data. In the experiment itself the motion of groups of 5 to 100 locust nymphs was investigated in a homogeneous laboratory environment, helping us to establish the intrinsic dynamics of locust marching bands. We determine the mean time between direction switches as a function of group density for the experimental data and the self-propelled particle model. This systematic approach allows us to identify key differences between the experimental data and the model, revealing that individual locusts appear to increase the randomness of their movements in response to a loss of alignment by the group. We give a quantitative description of how locusts use noise to maintain swarm alignment. We discuss further how properties of individual animal behavior, inferred by using the Fokker–Planck equation coefficient estimation approach, can be implemented in the self-propelled particle model to replicate qualitatively the group level dynamics seen in the experimental data

Optically Faint Microjansky Radio Sources

We report on the identifications of radio sources from our survey of the Hubble Deep Field and the SSA13 fields, both of which comprise the deepest radio surveys to date at 1.4 GHz and 8.5 GHz respectively. About 80% of the microjansky radio sources are associated with moderate redshift starburst galaxies or AGNs within the I magnitude range of 17 to 24 with a median of I = 22 mag. Thirty-one (20%) of the radio sources are: 1) fainter than $I>$25 mag, with two objects in the HDF $I_{AB}>$28.5, 2) often identified with very red objects $I-K>$4, and 3) not significantly different in radio properties than the brighter objects. We suggest that most of these objects are associated with heavily obscured starburst galaxies with redshifts between 1 and 3. However, other mechanisms are discussed and cannot be ruled out with the present observations.Comment: to appear in Astrophysical Journal Letters, 3 figures, 1 tabl