Laser-driven acceleration of quasi-monoenergetic, near-collimated titanium ions via a transparency-enhanced acceleration scheme

Laser-driven ion acceleration has been an active research area in the past two decades with the prospects of designing novel and compact ion accelerators. Many potential applications in science and industry require high-quality, energetic ion beams with low divergence and narrow energy spread. Intense laser ion acceleration research strives to meet these challenges and may provide high charge state beams, with some successes for carbon and lighter ions. Here we demonstrate the generation of well collimated, quasi-monoenergetic titanium ions with energies ∼145 and 180 MeV in experiments using the high-contrast(<10-9) and high-intensity (6× 1020 W cm-2) Trident laser and ultra-Thin (∼100 nm) titanium foil targets. Numerical simulations show that the foils become transparent to the laser pulses, undergoing relativistically induced transparency (RIT), resulting in a two-stage acceleration process which lasts until ∼2 ps after the onset of RIT. Such long acceleration time in the self-generated electric fields in the expanding plasma enables the formation of the quasi-monoenergetic peaks. This work contributes to the better understanding of the acceleration of heavier ions in the RIT regime, towards the development of next generation laser-based ion accelerators for various applications

A feasibility study of various joining techniques for three-dimensional printed polylactic acid and wood-reinforced polylactic acid biocomposite

Current research assesses various joining techniques such as an adhesive bond, direct three-dimensional (3D) printing, and an ultrasonic welding of 3D printed dissimilar thermoplastic materials such as PLA and wood reinforced PLA composites. The importance of the present study is to determine the effective technique for joining the 3D printed complex structural profiles. Mechanical responses such as lap shear strength and shore D hardness of the various joints were studied and compared experimentally. The results highlighted that 15-17 % of higher shear strength was obtained for the ultrasonically welded joints compared with the direct 3D printed PLA and wood PLA lap joints. Macroscopic investigation of the ultrasonic welded polymeric joint exhibits the melting of polymers and wet the interface—the results in inter-molecular diffusion of polymeric chains and entanglement of polymers under the respective conditions

Effect of sodium chloride stress on the pigment and biochemical variation of pigeon pea (Cajanus cajan (L.) Millsp.)

                In the present study, a pot culture experiment was conducted to estimate the effect on NaCl stressed Pigeon pea (Cajanus cajan (L.) Millsp.) the plant belongs to family Fabaceae, is a sub tropical crop, grown world wide particularly in south Asia for edible and fodder purposes, while little is known about its salinity tolerance. The seed were sown in plastic pots from 30 days after sowing (DAS), the plants were treated with 25mM, 50mM, 75mM and 100mM sodium chloride on 20th, 30th and 40th DAS. The plants samples were collected from 30th, 40th and 50th DAS. The leaf were collected for estimating pigment and biochemical content. The sodium chloride treatment decreased the chlorophyll-a, b, total chlorophyll and protein content. Similarly the amino acid and proline content were increased with increasing concentration of NaCl to a larger extent when compared to control in all the treatment day

Adolescent brain maturation and cortical folding: evidence for reductions in gyrification

Evidence from anatomical and functional imaging studies have highlighted major modifications of cortical circuits during adolescence. These include reductions of gray matter (GM), increases in the myelination of cortico-cortical connections and changes in the architecture of large-scale cortical networks. It is currently unclear, however, how the ongoing developmental processes impact upon the folding of the cerebral cortex and how changes in gyrification relate to maturation of GM/WM-volume, thickness and surface area. In the current study, we acquired high-resolution (3 Tesla) magnetic resonance imaging (MRI) data from 79 healthy subjects (34 males and 45 females) between the ages of 12 and 23 years and performed whole brain analysis of cortical folding patterns with the gyrification index (GI). In addition to GI-values, we obtained estimates of cortical thickness, surface area, GM and white matter (WM) volume which permitted correlations with changes in gyrification. Our data show pronounced and widespread reductions in GI-values during adolescence in several cortical regions which include precentral, temporal and frontal areas. Decreases in gyrification overlap only partially with changes in the thickness, volume and surface of GM and were characterized overall by a linear developmental trajectory. Our data suggest that the observed reductions in GI-values represent an additional, important modification of the cerebral cortex during late brain maturation which may be related to cognitive development

Mechanical and tribological behaviour of three-dimensional printed almond shell particles reinforced polylactic acid bio-composites

Recently, composite filament development for three-dimensional printing has emerged and is used for numerous applications. The present research work develops neat polylactic acid and Almond Shell Particles reinforced polylactic acid bio-composites for three-dimensional printing and investigates the effects of printing orientation, including 0°, 45° and 90° orientation, on the tribological and mechanical behaviours of three-dimensional printed materials. The novel almond shell particles reinforced polylactic acid filaments are extruded by the filament extrusion method with the presence of 10% almond shell particles in the polylactic acid matrix, and the samples are three-dimensional printed by the fused filament fabrication technique. Mechanical characteristics such as tensile, flexural, compressive strength, and shore hardness are evaluated with respect to various three-dimensional printing orientations. The surface quality of the three-dimensional printed polylactic acid composite samples is analysed with respect to length and diameter deviation. Length accuracy of the 90° oriented polylactic acid and almond shell particles reinforced polylactic acid bio-composite samples exploits a better accuracy of 99.12% and 98.81%, respectively. It is shown that adding almond shell particles to the polylactic acid matrix decreases the flexural and tensile strength. Among the printing orientations, 0° flat samples result in the maximum tensile strength of 36 and 28 MPa for the neat polylactic acid and almond shell particles reinforced polylactic acid composites, respectively. The lowest contact angle of 54° is observed on the almond shell particles reinforced polylactic acid bio-composites three-dimensional printed with a 90° orientation. The highest contact angle value of 94° is observed on the neat polylactic acid three-dimensional printed with a 0° printing orientation. A tribological study is carried out under dry conditions on the pin-on-disc tribometer by varying the sliding speed (1, 2, and 3 m/s) and load (10, 20, and 30 N). The result shows that the lowest coefficient of friction of 0.22 is achieved for the almond shell particles reinforced polylactic acid bio-composite samples with a 0° printing orientation under a sliding load of 10 N. These kinds of newly developed compostable materials can be used for developing disposable orthotic foot appliances

MRI Indices of Cortical Development in Young People With Psychotic Experiences: Influence of Genetic Risk and Persistence of Symptoms

Background Psychotic experiences (PEs) are considered part of an extended psychosis phenotype and are associated with an elevated risk of developing a psychotic disorder. Risk of transition increases with persistence of PEs, and this is thought to be modulated by genetic and environmental factors. However, it is unclear if persistence is associated with progressive schizophrenia-like changes in neuroanatomy. Methods We examined cortical morphometry using MRI in 247 young adults, from a population-based cohort, assessed for the presence of PEs at ages 18 and 20. We then incorporated a polygenic risk score for schizophrenia (PRS) to elucidate the effects of high genetic risk. Finally, we used atlas-based tractography data to examine the underlying white matter. Results Individuals with persisting PEs showed reductions in gyrification (local gyrification index: lGI) in the left temporal gyrus as well as atypical associations with brain volume (TBV) in the left occipital and right prefrontal gyri. No main effect was found for the PRS, but interaction effects with PEs were identified in the orbitofrontal, parietal, and temporal regions. Examination of underlying white matter did not provide strong evidence of further disturbances. Conclusions Disturbances in lGI were similar to schizophrenia but findings were mostly limited to those with persistent PEs. These could reflect subtle changes that worsen with impending psychosis or reflect an early vulnerability associated with the persistence of PEs. The lack of clear differences in underlying white matter suggests our findings reflect early disturbances in cortical expansion rather than progressive changes in brain structure