100 research outputs found
Analytical Study of Solution-Processed Tin Oxide as Electron Transport Layer in Printed Perovskite Solar Cells
Solutionâprocessed tin oxide (SnO ) electron transport layers demonstrate excellent performance in various optoelectronic devices and offer the ease of facile and low cost deposition by various printing techniques. The most common precursor solution for the preparation of SnO thin films is SnCl dissolved in ethanol. In order to elucidate the mechanism of the precursor conversion at different annealing temperatures and the optoelectronic performance of the SnO electron transport layer, phonon and vibrational infrared and photoelectron spectroscopies as well as atomic force microscopy are used to probe the chemical, physical, and morphological properties of the SnO thin films. The influence of two different solvents on the layer morphology of SnO thin films is investigated. In both cases, an increasing annealing temperature not only improves the structural and chemical properties of solutionâprocessed SnO, but also reduces the concentration of tin hydroxide species in the bulk and on the surface of these thin films. As a prototypical example for the high potential of printed SnO layers for solar cells, high performance perovskite solar cells with a stabilized power conversion efficiency of over 15% are presented
Translucent perovskite photovoltaics for building integration
Transparent photovoltaics provide diverse levels of average visible transmittance (AVT) along with concurrent light harvesting, making glass façades and windows accessible for photovoltaics. However, improvements in power conversion efficiency (PCE) and aesthetics are required to enhance commercial viability and public acceptance. This work presents the scalable fabrication of efficient micro-patterned translucent perovskite photovoltaics at optical qualities suited for building integration. Optimized laser-scribed transparent areas (25 ÎŒm) mitigate detrimental effects on electrical performance, featuring perovskite solar cells with 44% AVT and demonstrating industrial glass quality through neutral color rendering (CRI 97) and only 3% haze. Highlighting scalability, submodules yield PCEs of 9.0% at 32% AVT (4 cm2 aperture area). The transfer to two-terminal perovskiteâperovskite tandem solar cells exhibiting PCEs of 17.7% at 12% AVT and 11.1% at 31% AVT demonstrates the first translucent perovskite tandem photovoltaics. Lastly, the novel concept of transmittance gradients with 7% cmâ1 absolute change in AVT and 12.0% PCE for submodules is presented, providing a foundation for architectural individualizations
Sn-Pb Mixed Perovskites with Fullerene-Derivative Interlayers for Efficient Four-Terminal All-Perovskite Tandem Solar Cells
Interfacial engineering is the key to high-performance perovskite solar cells (PSCs). While a wide range of fullerene interlayers are investigated for Pb-based counterparts with a bandgap of >1.5 eV, the role of fullerene interlayers is barely investigated in Sn-Pb mixed narrow-bandgap (NBG) PSCs. In this work, two novel solution-processed fullerene derivatives are investigated, namely indene-C60-propionic acid butyl ester and indene-C60-propionic acid hexyl ester (IPH), as the interlayers in NBG PSCs. It is found that the devices with IPH-interlayer show the highest performance with a remarkable short-circuit current density of 30.7 mA cmâ2 and a low deficit in open-circuit voltage. The reduction in voltage deficit down to 0.43 V is attributed to reduced non-radiative recombination that the authors attribute to two aspects: 1) a higher conduction band offset of â0.2 eV (>0 eV) that hampers charge-carrier-back-transfer recombination; 2) a decrease in trap density at the perovskite/interlayer/C60 interfaces that results in reduced trap-assisted recombination. In addition, incorporating the IPH interlayer enhances charge extraction within the devices that results in considerable enhancement in short-circuit current density. Using a NBG device with an IPH interlayer, a respectable power conversion efficiency of 24.8% is demonstrated in a four-terminal all-perovskite tandem solar cell
A mathematical description of nerve fiber bundle trajectories and their variability in the human retina
AbstractWe developed a mathematical model wherein retinal nerve fiber trajectories can be described and the corresponding inter-subject variability analyzed. The model was based on traced nerve fiber bundle trajectories extracted from 55 fundus photographs of 55 human subjects. The model resembled the typical retinal nerve fiber layer course within 20° eccentricity. Depending on the location of the visual field test point, the standard deviation of the calculated corresponding angular location at the optic nerve head circumference ranged from less than 1° to 18°, with an average of 8.8°
Chemical vapor deposited polymer layer for efficient passivation of planar perovskite solar cells
Reducing non-radiative recombination losses by advanced passivation strategies is pivotal to maximize the power conversion efficiency (PCE) of perovskite solar cells (PSCs). Previously, polymers such as poly(methyl methacrylate), poly(ethylene oxide), and polystyrene were successfully applied in solution-processed passivation layers. However, controlling the thickness and homogeneity of these ultra-thin passivation layers on top of polycrystalline perovskite thin films is a major challenge. In response to this challenge, this work reports on chemical vapor deposition (CVD) polymerization of poly(p-xylylene) (PPX) layers at controlled substrate temperatures (14â16 °C) for efficient surface passivation of perovskite thin films. Prototype double-cation PSCs using a âŒ1 nm PPX passivation layer exhibit an increase in open-circuit voltage (V) of âŒ40 mV along with an enhanced fill factor (FF) compared to a non-passivated PSC. These improvements result in a substantially enhanced PCE of 20.4% compared to 19.4% for the non-passivated PSC. Moreover, the power output measurements over 30 days under ambient atmosphere (relative humidity âŒ40â50%) confirm that the passivated PSCs are more resilient towards humidity-induced degradation. Considering the urge to develop reliable, scalable and homogeneous deposition techniques for future large-area perovskite solar modules, this work establishes CVD polymerization as a novel approach for the passivation of perovskite thin films
Pinhole-free perovskite films for efficient solar modules
We report on a perovskite solar module with an aperture area of 4 cm2 and geometrical fill factor of 91%. The module exhibits an aperture area power conversion efficiency (PCE) of 13.6% from a currentâvoltage scan and 12.6% after 5 min of maximum power point tracking. High PCE originates in pinhole-free perovskite films made with a precursor combination of Pb(CH3CO2)2·3H2O, PbCl2, and CH3NH3I
Recommended from our members
Low-cost electrodes for stable perovskite solar cells
Cost-effective production of perovskite solar cells on an industrial scale requires the utilization of exclusively inexpensive materials. However, to date, highly efficient and stable perovskite solar cells rely on expensive gold electrodes since other metal electrodes are known to cause degradation of the devices. Finding a low-cost electrode that can replace gold and ensure both efficiency and long-term stability is essential for the success of the perovskite-based solar cell technology. In this work, we systematically compare three types of electrode materials: multi-walled carbon nanotubes (MWCNTs), alternative metals (silver, aluminum, and copper), and transparent oxides [indium tin oxide (ITO)] in terms of efficiency, stability, and cost. We show that multi-walled carbon nanotubes are the only electrode that is both more cost-effective and stable than gold. Devices with multi-walled carbon nanotube electrodes present remarkable shelf-life stability, with no decrease in the efficiency even after 180âh of storage in 77% relative humidity (RH). Furthermore, we demonstrate the potential of devices with multi-walled carbon nanotube electrodes to achieve high efficiencies. These developments are an important step forward to mass produce perovskite photovoltaics in a commercially viable way.The authors would also like to gratefully acknowledge Solliance for the financial support, the Initiating and Networking funding of the Helmholtz Association (HYIG of U. Paetzold), and the European Research Council (FP7 ERC StG HIENA - 337739 of M. de Volder). This research has received (partial) funding from the Flemish GovernmentâDepartment of Economics, Science and Innovation
E. coli Nissle 1917 Affects Salmonella Adhesion to Porcine Intestinal Epithelial Cells
BACKGROUND: The probiotic Escherichia coli strain Nissle 1917 (EcN) has been shown to interfere in a human in vitro model with the invasion of several bacterial pathogens into epithelial cells, but the underlying molecular mechanisms are not known. METHODOLOGY/PRINCIPAL FINDINGS: In this study, we investigated the inhibitory effects of EcN on Salmonella Typhimurium invasion of porcine intestinal epithelial cells, focusing on EcN effects on the various stages of Salmonella infection including intracellular and extracellular Salmonella growth rates, virulence gene regulation, and adhesion. We show that EcN affects the initial Salmonella invasion steps by modulating Salmonella virulence gene regulation and Salmonella SiiE-mediated adhesion, but not extra- and intracellular Salmonella growth. However, the inhibitory activity of EcN against Salmonella invasion always correlated with EcN adhesion capacities. EcN mutants defective in the expression of F1C fimbriae and flagellae were less adherent and less inhibitory toward Salmonella invasion. Another E. coli strain expressing F1C fimbriae was also adherent to IPEC-J2 cells, and was similarly inhibitory against Salmonella invasion like EcN. CONCLUSIONS: We propose that EcN affects Salmonella adhesion through secretory components. This mechanism appears to be common to many E. coli strains, with strong adherence being a prerequisite for an effective reduction of SiiE-mediated Salmonella adhesion
An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles
Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42,400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences
- âŠ