252 research outputs found
Dissertações e Teses
Resumo de Tesese e Dissertações apresentadas ao Programa de Pós-graduação em Engenharia Florestal da Universidade Federal de Santa Maria
Recommended from our members
Sensor fusion for intelligent process control.
An integrated system for the fusion of product and process sensors and controls for production of flat glass was envisioned, having as its objective the maximization of throughput and product quality subject to emission limits, furnace refractory wear, and other constraints. Although the project was prematurely terminated, stopping the work short of its goal, the tasks that were completed show the value of the approach and objectives. Though the demonstration was to have been done on a flat glass production line, the approach is applicable to control of production in the other sectors of the glass industry. Furthermore, the system architecture is also applicable in other industries utilizing processes in which product uniformity is determined by ability to control feed composition, mixing, heating and cooling, chemical reactions, and physical processes such as distillation, crystallization, drying, etc. The first phase of the project, with Visteon Automotive Systems as industrial partner, was focused on simulation and control of the glass annealing lehr. That work produced the analysis and computer code that provide the foundation for model-based control of annealing lehrs during steady state operation and through color and thickness changes. In the second phase of the work, with PPG Industries as the industrial partner, the emphasis was on control of temperature and combustion stoichiometry in the melting furnace, to provide a wider operating window, improve product yield, and increase energy efficiency. A program of experiments with the furnace, CFD modeling and simulation, flow measurements, and sensor fusion was undertaken to provide the experimental and theoretical basis for an integrated, model-based control system utilizing the new infrastructure installed at the demonstration site for the purpose. In spite of the fact that the project was terminated during the first year of the second phase of the work, the results of these first steps toward implementation of model-based control were sufficient to demonstrate the value of the approach to improving the productivity of glass manufacture
MAYORGA, FERNANDO. DILEMAS: ENSAYOS SOBRE DEMOCRACIA INTERCULTURAL Y ESTADO PLURINACIONAL. LA PAZ, BOLÍVIA: PLURAL, 2011, 332P.
---
Homenagem dos professores e alunos do Programa de Pós-Graduação em Meio Ambiente e Desenvolvimento – PPGMADE da UFPR
Political Risk Guarantees and Capital Flows: The Role of Bilateral Investment Treaties
Suspected Motor Problems and Low Preference for Active Play in Childhood Are Associated with Physical Inactivity and Low Fitness in Adolescence
Background - This prospective longitudinal study investigates whether suspected motor problems and low preference for active play in childhood are associated with physical inactivity and low cardiorespiratory fitness in adolescence.
Methodology/Principal Findings -
The study sample consisted of the Northern Finland Birth Cohort 1986 (NFBC 1986) composed of 5,767 children whose parents responded to a postal inquiry concerning their children's motor skills at age 8 years and who themselves reported their physical activity at age 16 years. Cardiorespiratory fitness was measured with a cycle ergometer test at age 16 years. Odds ratios (OR) and their 95% confidence intervals (95% CI) for the level of physical activity and fitness were obtained from multinomial logistic regression and adjusted for socio-economic position and body mass index. Low preference for active play in childhood was associated with physical inactivity (boys: OR 3.31, 95% CI 2.42–4.53; girls: OR 1.79, 95% CI 1.36–2.36) and low cardiorespiratory fitness (boys: OR 1.87, 95% CI 1.27–2.74; girls: OR 1.52, 95% CI 1.09–2.11) in adolescence. Suspected gross (OR 2.16, 95% CI 1.33–3.49) and fine (OR 1.88, 95% CI 1.35–2.60) motor problems were associated with physical inactivity among boys. Children with suspected motor problems and low preference for active play tended to have an even higher risk of physical inactivity in adolescence.
Conclusions/Significance -
Low preference for active play in childhood was associated with physical inactivity and low cardiorespiratory fitness in adolescence. Furthermore, children with suspected motor problems and low preference for active play tended to have an even higher risk of physical inactivity in adolescence. Identification of children who do not prefer active play and who have motor problems may allow targeted interventions to support their motor learning and participation in active play and thereby promote their physical activity and fitness in later life.peerReviewe
Recommended from our members
Glass Furnace Combustion and Melting Research Facility.
The need for a Combustion and Melting Research Facility focused on the solution of glass manufacturing problems common to all segments of the glass industry was given high priority in the earliest version of the Glass Industry Technology Roadmap (Eisenhauer et al., 1997). Visteon Glass Systems and, later, PPG Industries proposed to meet this requirement, in partnership with the DOE/OIT Glass Program and Sandia National Laboratories, by designing and building a research furnace equipped with state-of-the-art diagnostics in the DOE Combustion Research Facility located at the Sandia site in Livermore, CA. Input on the configuration and objectives of the facility was sought from the entire industry by a variety of routes: (1) through a survey distributed to industry leaders by GMIC, (2) by conducting an open workshop following the OIT Glass Industry Project Review in September 1999, (3) from discussions with numerous glass engineers, scientists, and executives, and (4) during visits to glass manufacturing plants and research centers. The recommendations from industry were that the melting tank be made large enough to reproduce the essential processes and features of industrial furnaces yet flexible enough to be operated in as many as possible of the configurations found in industry as well as in ways never before attempted in practice. Realization of these objectives, while still providing access to the glass bath and combustion space for optical diagnostics and measurements using conventional probes, was the principal challenge in the development of the tank furnace design. The present report describes a facility having the requirements identified as important by members of the glass industry and equipped to do the work that the industry recommended should be the focus of research. The intent is that the laboratory would be available to U.S. glass manufacturers for collaboration with Sandia scientists and engineers on both precompetitive basic research and the solution of proprietary glass production problems. As a consequence of the substantial increase in scale and scope of the initial furnace concept in response to industry recommendations, constraints on funding of industrial programs by DOE, and reorientation of the Department's priorities, the OIT Glass Program is unable to provide the support for construction of such a facility. However, it is the present investigators' hope that a group of industry partners will emerge to carry the project forward, taking advantage of the detailed furnace design presented in this report. The engineering, including complete construction drawings, bill of materials, and equipment specifications, is complete. The project is ready to begin construction as soon as the quotations are updated. The design of the research melter closely follows the most advanced industrial practice, firing by natural gas with oxygen. The melting area is 13 ft x 6 ft, with a glass depth of 3 ft and an average height in the combustion space of 3 ft. The maximum pull rate is 25 tons/day, ranging from 100% batch to 100% cullet, continuously fed, with variable batch composition, particle size distribution, and raft configuration. The tank is equipped with bubblers to control glass circulation. The furnace can be fired in three modes: (1) using a single large burner mounted on the front wall, (2) by six burners in a staggered/opposed arrangement, three in each breast wall, and (3) by down-fired burners mounted in the crown in any combination with the front wall or breast-wall-mounted burners. Horizontal slots are provided between the tank blocks and tuck stones and between the breast wall and skewback blocks, running the entire length of the furnace on both sides, to permit access to the combustion space and the surface of the glass for optical measurements and sampling probes. Vertical slots in the breast walls provide additional access for measurements and sampling. The furnace and tank are to be fully instrumented with standard measuring equipment, such as flow meters, thermocouples, continuous gas composition analyzers, optical pyrometers, and a video camera. The output from the instruments is to be continuously recorded and simultaneously made available to other researchers via the Internet. A unique aspect of the research facility would be its access to the expertise in optical measurements in flames and high temperature reacting flows residing in the Sandia Combustion Research Facility. Development of new techniques for monitoring and control of glass melting would be a major focus of the work. The lab would be equipped with conventional and laser light sources and detectors for optical measurements of gas temperature, velocity, and gaseous species and, using new techniques to be developed in the Research Facility itself, glass temperature and glass composition
Mutual Mate Choice: When it Pays Both Sexes to Avoid Inbreeding
Theoretical models of sexual selection predict that both males and females of many species should benefit by selecting their mating partners. However, empirical evidence testing and validating this prediction is scarce. In particular, whereas inbreeding avoidance is expected to induce sexual conflicts, in some cases both partners could benefit by acting in concert and exerting mutual mate choice for non-assortative pairings. We tested this prediction with the gregarious cockroach Blattella germanica (L.). We demonstrated that males and females base their mate choice on different criteria and that choice occurs at different steps during the mating sequence. Males assess their relatedness to females through antennal contacts before deciding to court preferentially non-siblings. Conversely, females biased their choice towards the most vigorously courting males that happened to be non-siblings. This study is the first to demonstrate mutual mate choice leading to close inbreeding avoidance. The fact that outbred pairs were more fertile than inbred pairs strongly supports the adaptive value of this mating system, which includes no “best phenotype” as the quality of two mating partners is primarily linked to their relatedness. We discuss the implications of our results in the light of inbreeding conflict models
Microplastics Uptake and Egestion Dynamics in Pacific Oysters, Magallana gigas (Thunberg, 1793), Under Controlled Conditions
Microplastics debris (< 5 mm) are increasingly abundant in the marine environment, therefore, potentially becoming a growing threat for different marine organisms. Through aquatic animals, these can enter in the human food chain, and can be perceived as a risk for consumers’ health. Different studies report the presence of particles in marketable shellfish including the world wide commercially grown Pacific oyster Magallana gigas (Thunberg, 1793). The aim of this study is to examine the potential risk of microplastics entering in the human food chain through this shellfish species, investigating the dynamics of the uptake, egestion (faeces) and rejection (pseudofaeces) of microplastics in Pacific oysters under controlled conditions. M. gigas collected from a farm in the San Teodoro lagoon (Italy), were exposed to 60 fluorescent orange polystyrene particles L−1 of known sizes (100, 250 and 500 μm). The uptake of each particle size was 19.4 ± 1.1%, 19.4 ± 2% and 12.9 ± 2% respectively. After exposure M. gigas were left to depurate for 72 h, during which 84.6 ± 2% of the particles taken up were released whilst 15.4 ± 2% were retained inside the shell cavity. No microplastic particles were found in the animals’ soft tissues. The results of this study, suggest that depuration is an effective method to reduce presence of large microplastic particles, in the size range 100–500 μm, in M. gigas. Importantly, the data suggests that the burden that could theoretically be up taken by consumers from these shellfish is negligible when compared to other routes
- …