NLOS GPS signal detection using a dual-polarisation antenna

The reception of indirect signals, either in the form of non-line-of-sight (NLOS) reception or multipath interference, is a major cause of GNSS position errors in urban environments. We explore the potential of using dual-polarisation antenna technology for detecting and mitigating the reception of NLOS signals and severe multipath interference. The new technique computes the value of the carrier-power-to-noise-density (C/N0) measurements from left-hand circular polarised outputs subtracted from the right-hand circular polarised C/N0 counterpart. If this quality is negative, NLOS signal reception is assumed. If the C/N0 difference is positive, but falls below a threshold based on its lower bound in an open-sky environment, severe multipath interference is assumed. Results from two experiments are presented. Open-field testing was first performed to characterise the antenna behaviour and determine a suitable multipath detection threshold. The techniques were then tested in a dense urban area. Using the new method, two signals in the urban data were identified as NLOS-only reception during the occupation period at one station, while the majority of the remaining signals present were subject to a mixture of NLOS reception and severe multipath interference. The point positioning results were dramatically improved by excluding the detected NLOS measurements. The new technique is suited to a wide range of static ground applications based on our results

A Portfolio Approach to NLOS and Multipath Mitigation in Dense Urban Areas

Non-line-of-sight (NLOS) reception and multipath interference are major causes of poor GNSS positioning accuracy in dense urban environments. They are commonly grouped together. However, both the mechanisms by which they cause position errors and many of the techniques for mitigating those errors are quite different [1]. For example, correlation-based multipath mitigation has no effect on the errors caused by NLOS reception. University College London (UCL) has investigated the performance of a number of multipath and/or NLOS mitigation techniques in dense urban areas, including C/N0-based solution weighting [2], advanced consistency checking [3], dual-polarization NLOS detection [4] and vector tracking [5]. In this paper, we present a new multipath detection technique based on comparing the measured C/N0 on multiple frequencies and also new dual-polarization results. Meanwhile, other researchers have demonstrated NLOS detection using a panoramic camera [6, 7] or 3D city model [8, 9] and detection of NLOS and multipath using an antenna array [10]. All of these techniques bring some improvement in positioning performance in urban environments, but none of them eliminate the effects of both NLOS reception and multipath interference completely. As the different techniques are largely complementary, best performance is obtained by using several of them in combination, a portfolio approach. This paper comprises three parts. The first presents a feasibility study on a new multipath detection technique using multi-frequency C/N0 measurements. Constructive multipath interference results in an increase in the measured C/N0, whereas destructive multipath interference results in a decrease. As the phase of a reflected signal with respect to its directly received counterpart depends on the wavelength, the multipath interference may be constructive on one frequency and destructive on another. Thus, by comparing the difference in measured C/N0 between two frequencies with what would normally be expected for that signal at that elevation angle, strong multipath interference may be detected. However, the converse is not true because, depending on the path delay, the phase of the multipath interference may also be consistent across the two frequencies. Consistency across three frequencies in the presence of multipath interference is much less likely than consistency across two. Therefore, by comparing C/N0 measured across three (or more) frequencies, the chance of detection is improved substantially, noting that reliability is less critical as part of a portfolio approach to multipath detection than for a stand-alone technique. Experimental results are presented demonstrating the potential of this approach using GPS and GLONASS data collected in Central London. The second part of the paper presents the results of the first multi-constellation test of the dual-polarization NLOS detection technique pioneered at UCL [4]. This separately correlates the right hand circularly polarized (RHCP) and left hand circularly polarized (LHCP) outputs of a dual-polarization antenna and differences the resulting C/N0 measurements, producing a result that is positive for directly received signals and negative for most NLOS signals. Data was collected at six different sites in Central London and NLOS reception of both GPS and GLONASS signals was detected. Position solutions with the NLOS signals removed are compared with the corresponding all-satellite solutions. The final part of the paper addresses the portfolio approach to NLOS and multipath mitigation. Each technique is assessed qualitatively for its ease of implementation and its efficiency at detecting or directly mitigating both NLOS reception and multipath mitigation. A compatibility matrix is then presented showing which techniques may be combined without conflict. Suitable portfolios are then proposed both for professional-grade and for consumer-grade user equipment. References [1] Groves, P. D., Principles of GNSS, inertial, and multi-sensor integrated navigation systems, Second Edition, Artech House, 2013. [2] Jiang, Z., P. Groves, W. Y. Ochieng, S. Feng, C. D. Milner, and P. G. Mattos, “Multi-Constellation GNSS Multipath Mitigation Using Consistency Checking,” Proc. ION GNSS 2011. [3] Jiang, Z., and P. Groves, “GNSS NLOS and Multipath Error Mitigation using Advanced Multi-Constellation Consistency Checking with Height Aiding,” Proc. ION GNSS 2012. [4] Jiang, Z., and P. D. Groves, “NLOS GPS Signal Detection Using A Dual-Polarisation Antenna,” GPS Solutions, 2012, DOI: 10.1007/s10291-012-0305-5. [5] Hsu, L.-T., P. D. Groves, and S.-S. Jan, “Assessment of the Multipath Mitigation Effect of Vector Tracking in an Urban Environment,” Proc ION Pacific PNT, 2013. [6] Marais, J., M. Berbineau, and M. Heddebaut, “Land Mobile GNSS Availability and Multipath Evaluation Tool,” IEEE Transactions on Vehicular Technology, Vol. 54, No. 5, 2005, pp. 1697-1704. [7] Meguro, J., et al., “GPS Multipath Mitigation for Urban Area Using Omnidirectional Infrared Camera,” IEEE Transactions on Intelligent Transportation Systems, Vol. 10, No. 1, 2009, pp. 22-30. [8] Obst, M., S. Bauer, and G. Wanielik, “Urban Multipath Detection and mitigation with Dynamic 3D Maps for Reliable Land Vehicle Localization,” Proc. IEEE/ION PLANS 2012. [9] Peyraud, S., et al., “About Non-Line-Of-Sight Satellite Detection and Exclusion in a 3D Map-Aided Localization Algorithm,” Sensors, Vol. 13, 2013, pp. 829-847. [10] Keshvadi, M. H., A. Broumandan, and G. Lachapelle, “Analysis of GNSS Beamforming and Angle of Arrival Estimation in Multipath Environments," Proc ION ITM, San Diego, CA, January 2011, pp. 427-435

Toward a unified PNT, Part 2: Ambiguity and environmental data: Two further key challenges of multisensor positioning

The coming requirements of greater accuracy and reliability in a range of challenging environments for a multitude of missioncritical applications require a multisensor approach and an over-arching methodology that does not yet exist. The likelihood depends on both the positioning method and the context, both environmental and behavioral. Urban and indoor positioning techniques that do not require dedicated infrastructure are particularly vulnerable to ambiguity. Even where a signal of opportunity is identifiable, the transmission site may change without warning. For example, Wi-Fi access points are sometimes moved and mobile phone networks are periodically refigured. Thus, there is a risk of false landmark identification. The pattern-matching positioning method maintains a database of measurable parameters that vary with position. Examples include terrain height, magnetic field variations, Wi-Fi signal strengths, and GNSS signal availability information

Optimization of a novel micro-opto-X-ray imaging lens

A mechanically deformable reflection transmission MOEMS system is capable of focusing X-rays to sub micron spots. This paper considers the geometry of the proposed deformed slotted microcantilever lens element under thermally derived strain, using finite element analysis. The work shows that an optimized MOEMS design using a slotted polyimide/gold thermal bimorph cantilever is capable of achieving ideal geometry with a larger than expected number of focusing slots – up to 111 at 2 μm width

Height Aiding, C/N 0 Weighting and Consistency Checking for GNSS NLOS and Multipath Mitigation in Urban Areas

Multiple global navigation satellite system (GNSS) constellations can dramatically improve the signal availability in dense urban environments. However, accuracy remains a challenge because buildings block, reflect and diffract the signals. This paper investigates three different techniques for mitigating the impact of non-line-of-sight (NLOS) reception and multipath interference on position accuracy without using additional hardware, testing them using data collected at multiple sites in central London. Aiding the position solution using a terrain height database was found to have the biggest impact, improving the horizontal accuracy by 35% and the vertical accuracy by a factor of 4. An 8% improvement in horizontal accuracy was also obtained from weighting the GNSS measurements in the position solution according to the carrier-power-to-noise-density ratio (C/N0). Consistency checking using a conventional sequential elimination technique was found to degrade horizontal positioning performance by 60% because it often eliminated the wrong measurements in cases when multiple signals were affected by NLOS reception or strong multipath interference. A new consistency checking method that compares subsets of measurements performed better, but was still equally likely to improve or degrade the accuracy. This was partly because removing a poor measurement can result in adverse signal geometry, degrading the position accuracy. Based on this, several ways of improving the reliability of consistency checking are proposed

Novel multipath mitigation methods using a dual-polarization antenna

There are many methods for mitigating GNSS multipath errors. However, none of them completely eliminate the effects of multipath or suit all GNSS applications. A new class of multipath mitigation methods exploit new dual-polarization antenna technology. GNSS signals received direct from the satellites have right-handed circular polarization (RHCP), whereas (singly) reflected signals have left-handed circular polarization (LHCP) or an elliptical polarization that may be expressed as the sum of RHCP and LHCP components. Conventional GNSS user antennas are more sensitive to signals with RHCP, attenuating LHCP signals and reducing, but not eliminating, the multipath errors in the receiver. An antenna with the opposite polarization sensitivity will attenuate the direct signals more than the reflected signals. This can be used to characterizing the reflected signals and thus mitigate the effects of multipath interference.Experimental work using an Antcom dual-polarization antenna and dual geodetic receivers is presented. This verifies that carrier power to noise density, C/N-0, measurements obtained by separately correlating the RHCP and LHCP antenna outputs can be used to distinguish between a low-multipath and moderate-multipath environment. This may be used as the basis of a multipath detection technique.Three different multipath mitigation techniques that use a dual-polarization antenna are proposed. Measurement weighting estimates the code and carrier multipath error standard deviation from the RHCP-LHCP C/N-0 difference and elevation angle. This is used by the navigation processor to discard and reweight measurements. Range-domain multipath correction, uses the pseudo-range, carrier-phase and C/N-0 differences between the outputs of RHCP and LHCP receiver tracking channels, together with antenna calibration data, to estimate corrections to the code and carrier measurements. In tracking-domain multipath mitigation, the RHCP and LHCP correlator outputs are input to common acquisition and tracking algorithms which attempt to separate the direct line of sight and reflected signalsThe design of a novel dual-input GNSS front end, based on direct RF sampling, is presented This will be used, in conjunction with a software GNSS receiver, for future development and testing of multipath mitigation using a dual-polarization antenna

A first step to accelerating fingerprint matching based on deformable minutiae clustering

Fingerprint recognition is one of the most used biometric methods for authentication. The identification of a query fingerprint requires matching its minutiae against every minutiae of all the fingerprints of the database. The state-of-the-art matching algorithms are costly, from a computational point of view, and inefficient on large datasets. In this work, we include faster methods to accelerating DMC (the most accurate fingerprint matching algorithm based only on minutiae). In particular, we translate into C++ the functions of the algorithm which represent the most costly tasks of the code; we create a library with the new code and we link the library to the original C# code using a CLR Class Library project by means of a C++/CLI Wrapper. Our solution re-implements critical functions, e.g., the bit population count including a fast C++ PopCount library and the use of the squared Euclidean distance for calculating the minutiae neighborhood. The experimental results show a significant reduction of the execution time in the optimized functions of the matching algorithm. Finally, a novel approach to improve the matching algorithm, considering cache memory blocking and parallel data processing, is presented as future work.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Spontaneous emulsification induced by nanoparticle surfactants

Microemulsions, mixtures of oil, water, and surfactant, are thermodynamically stable. Unlike conventional emulsions, microemulsions form spontaneously, have a monodisperse droplet size that can be controlled by adjusting the surfactant concentration, and do not degrade with time. To make microemulsions, a judicious choice of surfactant molecules must be made, which significantly limits their potential use. Nanoparticle surfactants, on the other hand, are a promising alternative because the surface chemistry needed to make them bind to a liquid-liquid interface is both well flexible and understood. Here, we derive a thermodynamic model predicting the conditions in which nanoparticle surfactants drive spontaneous emulsification that agrees quantitatively with experiments using Noria nanoparticles. This new class of microemulsions inherits the mechanical, chemical, and optical properties of the nanoparticles used to form them, leading to novel applications