Australian Economic Growth: Non-Linearities and Internaitonal Influences.

This paper considers the extent to which fluctuations in Australian economic growth are affected by domestic and overseas economic performance. We investigate the performance of a range of non-linear models versus linear models using Bayes factors and posterior odds ratios. The posterior odds ratios favour non-linear specifications in which fluctuations in economic activity in the US affect Australia's economic performance. Our results suggest that an exogenous negative shock will be more persistent, lead to greater output volatility, and have a greater impact on growth, than a positive shock of equal magnitude.ECONOMIC GROWTH ; BUSINESS CYCLES ; INTERNATIONAL ECONOMY

Fast resolution of identification problems in seed production and plant breeding using molecular markers

Polymerase chain reaction (PCR) analysis with specific and arbitrary primers was used to identify germplasm from a barley breeding program. Through practical application of the technology, an F1 plant's identity was confirmed, the correct pedigrees of incorrectly labelled F2 populations were determined, confusion in the identity of seed lots of an advanced breeding line was resolved and off-type barley plants were identified in a seed increase block. This illustrated the value of PCR-based genotype analysis in plant breeding programs

Light and nitrogen nutrition regulate apical control in Rosa hybrida L.

Apical control is defined as the inhibition of basal axillary bud outgrowth by an upper actively growing axillary axis, whose regulation is poorly understood yet differs markedly from the better-known apical dominance. We studied the regulation of apical control by environmental factors in decapitated Rosa hybrida in order to remove the apical hormonal influence and nutrient sink. In this plant model, all the buds along the main axis have a similar morphology and are able to burst in vitro. We concentrated on the involvement of light intensity and nitrate nutrition on bud break and axillary bud elongation in the primary axis pruned above the fifth leaf of each rose bush. We observed that apical control took place in low light (92 μmol m−2 s−1), where only the 2-apical buds grew out, both in low (0.25 mM) and high (12.25 mM) nitrate. In contrast, in high light (453 μmol m−2 s−1), the apical control only operates in low nitrate while all the buds along the stem grew out when the plant was supplied with a high level of nitrate. We found a decreasing photosynthetic activity from the top to the base of the plant concomitant with a light gradient along the stem. The quantity of sucrose, fructose, glucose and starch are higher in high light conditions in leaves and stem. The expression of the sucrose transporter RhSUC2 was higher in internodes and buds in this lighting condition, suggesting an increased capacity for sucrose transport. We propose that light intensity and nitrogen availability both contribute to the establishment of apical control

Tunneling and propagation of vacuum bubbles on dynamical backgrounds

In the context of bubble universes produced by a first-order phase transition with large nucleation rates compared to the inverse dynamical time scale of the parent bubble, we extend the usual analysis to non-vacuum backgrounds. In particular, we provide semi-analytic and numerical results for the modified nucleation rate in FLRW backgrounds, as well as a parameter study of bubble walls propagating into inhomogeneous (LTB) or FLRW spacetimes, both in the thin-wall approximation. We show that in our model, matter in the background often prevents bubbles from successful expansion and forces them to collapse. For cases where they do expand, we give arguments why the effects on the interior spacetime are small for a wide range of reasonable parameters and discuss the limitations of the employed approximations.Comment: 29 pages, 8 figures, typos corrected, matches published versio

Method for estimating potential recognition capacity of texture-based biometrics

When adopting an image-based biometric system, an important factor for consideration is its potential recognition capacity, since it not only defines the potential number of individuals likely to be identifiable, but also serves as a useful figure-of-merit for performance. Based on block transform coding commonly used for image compression, this study presents a method to enable coarse estimation of potential recognition capacity for texture-based biometrics. Essentially, each image block is treated as a constituent biometric component, and image texture contained in each block is binary coded to represent the corresponding texture class. The statistical variability among the binary values assigned to corresponding blocks is then exploited for estimation of potential recognition capacity. In particular, methodologies are proposed to determine appropriate image partition based on separation between texture classes and informativeness of an image block based on statistical randomness. By applying the proposed method to a commercial fingerprint system and a bespoke hand vein system, the potential recognition capacity is estimated to around 10^36 for a fingerprint area of 25  mm^2 which is in good agreement with the estimates reported, and around 10^15 for a hand vein area of 2268  mm^2 which has not been reported before

Efficient Algorithm on a Non-staggered Mesh for Simulating Rayleigh-Benard Convection in a Box

An efficient semi-implicit second-order-accurate finite-difference method is described for studying incompressible Rayleigh-Benard convection in a box, with sidewalls that are periodic, thermally insulated, or thermally conducting. Operator-splitting and a projection method reduce the algorithm at each time step to the solution of four Helmholtz equations and one Poisson equation, and these are are solved by fast direct methods. The method is numerically stable even though all field values are placed on a single non-staggered mesh commensurate with the boundaries. The efficiency and accuracy of the method are characterized for several representative convection problems.Comment: REVTeX, 30 pages, 5 figure

Accidental Inflation in the Landscape

We study some aspects of fine tuning in inflationary scenarios within string theory flux compactifications and, in particular, in models of accidental inflation. We investigate the possibility that the apparent fine-tuning of the low energy parameters of the theory needed to have inflation can be generically obtained by scanning the values of the fluxes over the landscape. Furthermore, we find that the existence of a landscape of eternal inflation in this model provides us with a natural theory of initial conditions for the inflationary period in our vacuum. We demonstrate how these two effects work in a small corner of the landscape associated with the complex structure of the Calabi-Yau manifold P^4_[1,1,1,6,9] by numerically investigating the flux vacua of a reduced moduli space. This allows us to obtain the distribution of observable parameters for inflation in this mini-landscape directly from the fluxes.Comment: 40 pages, 11 figure

Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments

Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made available as an electronic reprint with the permission of ASM International. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor

Affective Instability, Childhood Trauma and Major Affective Disorders

BACKGROUND: Affective instability (AI), childhood trauma, and mental illness are linked, but evidence in affective disorders is limited, despite both AI and childhood trauma being associated with poorer outcomes. Aims were to compare AI levels in bipolar disorder I (BPI) and II (BPII), and major depressive disorder recurrent (MDDR), and to examine the association of AI and childhood trauma within each diagnostic group. METHODS: AI, measured using the Affective Lability Scale (ALS), was compared between people with DSM-IV BPI (n=923), BPII (n=363) and MDDR (n=207) accounting for confounders and current mood. Regression modelling was used to examine the association between AI and childhood traumas in each diagnostic group. RESULTS: ALS scores in descending order were BPII, BPI, MDDR, and differences between groups were significant (p<0.05). Within the BPI group any childhood abuse (p=0.021), childhood physical abuse (p=0.003) and the death of a close friend in childhood (p=0.002) were significantly associated with higher ALS score but no association was found between childhood trauma and AI in BPII and MDDR. LIMITATIONS: The ALS is a self-report scale and is subject to retrospective recall bias. CONCLUSIONS: AI is an important dimension in bipolar disorder independent of current mood state. There is a strong link between childhood traumatic events and AI levels in BPI and this may be one way in which exposure and disorder are linked. Clinical interventions targeting AI in people who have suffered significant childhood trauma could potentially change the clinical course of bipolar disorder

Molecular assessment of bacterial vaginosis by Lactobacillus abundance and species diversity

__Background:__ To date, women are most often diagnosed with bacterial vaginosis (BV) using microscopy based Nugent scoring or Amsel criteria. However, the accuracy is less than optimal. The aim of the present study was to confirm the identity of known BV-associated composition profiles and evaluate indicators for BV using three molecular methods. __Methods:__ Evaluation of indicators for BV was carried out by 16S rRNA amplicon sequencing of the V5-V7 region, a tailor-made 16S rRNA oligonucleotide-based microarray, and a PCR-based profiling technique termed IS-profiling, which is based on fragment variability of the 16S-23S rRNA intergenic spacer region. An inventory of vaginal bacterial species was obtained from 40 females attending a Dutch sexually transmitted infection outpatient clinic, of which 20 diagnosed with BV (Nugent score 7-10), and 20 BV negative (Nugent score 0-3). __Results:__ Analysis of the bacterial communities by 16S rRNA amplicon sequencing revealed two clusters in the BV negative women, dominated by either Lactobacillus iners or Lactobacillus crispatus and three distinct clusters in the BV positive women. In the former, there was a virtually complete, negative correlation between L. crispatus and L. iners. BV positive subjects showed cluster profiles that were relatively high in bacterial species diversity and dominated by anaerobic species, including Gardnerella vaginalis, an