400 research outputs found
Association of HLA types A1-B8-DR3 and B27 with rapid and slow progression of HIV disease
We examined how HLA types A1-B8-DR3 and B27 were related to progression of clinical disease and rate of loss of CD4 lymphocytes in the Edinburgh City Hospital cohort of HIV-positive patients, mainly injection drug users. Patients (n = 692) were prospectively followed from 1985 through March 1994. Accurately estimated seroconversion times were determined retrospectively for a subgroup of 313 (45%). Of 262 patients (39%) who were fully or partially HLA typed, 155 (50%) had known seroconversions. Of 34 patients typed positive for A1-B8-DR3, 29 progressed to CDC stage IV, 22 to AIDS and 20 died. Twelve patients were typed positive for B27; six of these progressed to CDC stage IV, one to AIDS and none died. In a proportional hazards analysis of the 313 patients with known seroconversions, A1-B8-DR3 was significantly associated with covariate-adjusted relative risks of 3.7 (95% CI 1.9-7.2), 3.1 (1.6-6.0) and 1.9 (1.1-3.2) for progression from seroconversion to death, AIDS and CDC stage IV, respectively. Events for B27 were too rare to include B27 in analyses to death and AIDS, but B27 was significantly associated with slower progression to CDC stage IV (0.3, CI 0.1-0.9). Random effects growth curve models were used to estimate individual rates of loss of square root CD4 count and loss of CD4 percentage, for 603 and 617 patients, respectively. A1-B8-DR3 was associated with rapid loss of both markers (p=0.02 and p = 0.01, respectively); B27 was associated with slow loss of both markers (p=0.04 and p<0.005
Etched distributed Bragg reflectors as three-dimensional photonic crystals: photonic bands and density of states
The photonic band dispersion and density of states (DOS) are calculated for
the three-dimensional (3D) hexagonal structure corresponding to a distributed
Bragg reflector patterned with a 2D triangular lattice of circular holes.
Results for the Si/SiO and GaAs/AlGaAs systems determine the optimal
parameters for which a gap in the 2D plane occurs and overlaps the 1D gap of
the multilayer. The DOS is considerably reduced in correspondence with the
overlap of 2D and 1D gaps. Also, the local density of states (i.e., the DOS
weighted with the squared electric field at a given point) has strong
variations depending on the position. Both results imply substantial changes of
spontaneous emission rates and patterns for a local emitter embedded in the
structure and make this system attractive for the fabrication of a 3D photonic
crystal with controlled radiative properties.Comment: 8 pages, 5 figures; to appear in Phys. Rev.
Simulation of growth and development of diverse legume species in APSIM
This paper describes the physiological basis and validation of a generic legume model as it applies to 4 species: chickpea (Cicer arietinum L.), mungbean (Vigna radiata (L.) Wilczek), peanut (Arachis hypogaeaL.), and lucerne (Medicago sativa L.). For each species, the key physiological parameters were derived from the literature and our own experimentation. The model was tested on an independent set of experiments, predominantly from the tropics and subtropics of Australia, varying in cultivar, sowing date, water regime (irrigated or dryland), row spacing, and plant population density. The model is an attempt to simulate crop growth and development with satisfactory comprehensiveness, without the necessity of defining a large number of parameters. A generic approach was adopted in recognition of the common underlying physiology and simulation approaches for many legume species. Simulation of grain yield explained 77, 81, and 70% of the variance (RMSD = 31, 98, and 46 g/m2) for mungbean (n = 40, observed mean = 123 g/m2), peanut (n = 30, 421 g/m2), and chickpea (n = 31, 196 g/m2), respectively. Biomass at maturity was simulated less accurately, explaining 64, 76, and 71% of the variance (RMSD = 134, 236, and 125 g/m2) for mungbean, peanut, and chickpea, respectively. RMSD for biomass in lucerne (n = 24) was 85 g/m2 with an R2 of 0.55. Simulation accuracy is similar to that achieved by single-crop models and suggests that the generic approach offers promise for simulating diverse legume species without loss of accuracy or physiological rigour
Rotating Resonator-Oscillator Experiments to Test Lorentz Invariance in Electrodynamics
In this work we outline the two most commonly used test theories (RMS and
SME) for testing Local Lorentz Invariance (LLI) of the photon. Then we develop
the general framework of applying these test theories to resonator experiments
with an emphasis on rotating experiments in the laboratory. We compare the
inherent sensitivity factors of common experiments and propose some new
configurations. Finally we apply the test theories to the rotating cryogenic
experiment at the University of Western Australia, which recently set new
limits in both the RMS and SME frameworks [hep-ph/0506074].Comment: Submitted to Lecture Notes in Physics, 36 pages, minor modifications,
updated list of reference
Influence of production variables and starting material on charcoal stable isotopic and molecular characteristics
We present a systematic study on the effect of starting species, gas composition, temperature, particle size and duration of heating upon the molecular and stable isotope composition of high density (mangrove) and low density (pine) wood. In both pine and mangrove, charcoal was depleted in o13C relative to the starting wood by up to 1.6% and 0.8%, respectively. This is attributed predominantly to the progressive loss of isotopically heavier polysaccharides, and kinetic effects of aromatization during heating. However, the pattern of o13C change was dependant upon both starting species and atmosphere, with different structural changes associated with charcoal production from each wood type elucidated by Solid-State o13C Nuclear Magnetic Resonance Spectroscopy. These are particularly evident at lower temperatures, where variation in the oxygen content of the production atmosphere results in differences in the thermal degradation of cellulose and lignin. It is concluded that production of charcoal from separate species in identical conditions, or from a single sample exposed to different production variables, can result in significantly different o13C of the resulting material, relative to the initial wood. These results have implications for the use of charcoal isotope composition to infer past environmental change
Decomposition and nutrient release of leguminous plants in coffee agroforestry systems.
Leguminous plants used as green manure are an important nutrient source for coffee plantations, especially for soils with low nutrient levels. Field experiments were conducted in the Zona da Mata of Minas Gerais State, Brazil to evaluate the decomposition and nutrient release rates of four leguminous species used as green manures (Arachis pintoi, Calopogonium mucunoides, Stizolobium aterrimum and
Stylosanthes guianensis) in a coffee agroforestry system under two different climate conditions. The initial N contents in plant residues varied from 25.7 to 37.0 g kg-1 and P from 2.4 to 3.0 g kg-1. The lignin/N, lignin/polyphenol and(lignin+polyphenol)/N ratios were low in all residues studied. Mass loss rates were highest in the first 15 days, when 25 % of the residues were decomposed. From 15 to 30 days, the decomposition rate decreased on both farms. On the farm in Pedra Dourada (PD), the decomposition constant k increased in the order C. mucunoides < S. aterrimum < S. guianensis < A. pintoi. On the farm in Araponga (ARA), there was no difference in the decomposition rate among leguminous plants. The N release rates varied from 0.0036 to 0.0096 d-1. Around 32 % of the total N content in the plant material was released in the first 15 days. In ARA, the N concentration in the S. aterrimum residues was always significantly higher than in the other residues. At the end of 360 days, the N released was 78 % in ARA and 89 % in PD of the initial content. Phosphorus was the most rapidly released nutrient (k values from 0.0165 to 0.0394 d-1). Residue decomposition and nutrient release did not correlate with initial residue chemistry and biochemistry, but differences in climatic conditions between the two study sites modified the decomposition rate constants
Mechanics: non-classical, non-quantum
A non-classical, non-quantum theory, or NCQ, is any fully consistent theory
that differs fundamentally from both the corresponding classical and quantum
theories, while exhibiting certain features common to both. Such theories are
of interest for two primary reasons. Firstly, NCQs arise prominently in
semi-classical approximation schemes. Their formal study may yield improved
approximation techniques in the near-classical regime. More importantly for the
purposes of this note, it may be possible for NCQs to reproduce quantum results
over experimentally tested regimes while having a well defined classical limit,
and hence are viable alternative theories. We illustrate an NCQ by considering
an explicit class of NCQ mechanics. Here this class will be arrived at via a
natural generalization of classical mechanics formulated in terms of a
probability density functional
Poincare Invariant Algebra From Instant to Light-Front Quantization
We present the Poincare algebra interpolating between instant and light-front
time quantizations. The angular momentum operators satisfying SU(2) algebra are
constructed in an arbitrary interpolation angle and shown to be identical to
the ordinary angular momentum and Leutwyler-Stern angular momentum in the
instant and light-front quantization limits, respectively. The exchange of the
dynamical role between the transverse angular mometum and the boost operators
is manifest in our newly constructed algebra.Comment: 21 pages, 3 figures, 1 tabl
A theorem proving framework for the formal verification of Web Services Composition
We present a rigorous framework for the composition of Web Services within a
higher order logic theorem prover. Our approach is based on the
proofs-as-processes paradigm that enables inference rules of Classical Linear
Logic (CLL) to be translated into pi-calculus processes. In this setting,
composition is achieved by representing available web services as CLL
sentences, proving the requested composite service as a conjecture, and then
extracting the constructed pi-calculus term from the proof. Our framework,
implemented in HOL Light, not only uses an expressive logic that allows us to
incorporate multiple Web Services properties in the composition process, but
also provides guarantees of soundness and correctness for the composition.Comment: In Proceedings WWV 2011, arXiv:1108.208
- …